New to remote operation and trying to understand the RemoteHams ecosystem. RemoteHams server and RCForb Client software provides the capability to easily remotely control a ham radio station including an amplifier, antenna rotator, and switches. The RCForb client software integrates with popular logging programs and includes a keyboard keyer and DX cluster. I've got my IC-7300 working via the RCForb server but struggling with logging integration. Which logging programs work best with RCForb? My current setup has intermittent CAT control issues when trying to sync frequency data.

Ham Radio Deluxe works well but you need proper port configuration. Make sure you open up ports 7805 (Ham Radio Deluxe Remote Server) and 7806 (Ham Radio Deluxe Serial Port server) for incoming TCP traffic. This will probably need to be done on your router where your internet service enters your home. Virtual serial ports are key for logging integration.

I've found success with N1MM+ using virtual COM port pairs. The trick is setting up the CAT control timing properly - when frequency is updated over a link with high round trip time (>100ms) performance will be less than optimal with Sync selected, so select Async. The disadvantage of using Async is an 'elastic band' effect while tuning.

Are you getting registered users access set up correctly? I have my servers set to have users be registered before they can 'spin the knob', so send me a PM if you want your call on the user list for privileges. Many connectivity issues stem from permissions not being configured properly on the server side.