- Replies 1
- Views 9
- Created
- Last Reply
☀
Solar
SFI
201
SN
126
A
14
K
1
Quiet
X-Ray
C2.5
Wind
391.2 km/s
Aurora
2
Updated 15:30 UTC
HamQSL · N0NBH
Day
80/40m Poor 30/20m Good 17/15m Good 12/10m Good
Night
80/40m Good 30/20m Good 17/15m Good 12/10m Poor
Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
so ive been trying to get winlink going for a few weeks now and i think im close but something is off with the RMS gateway selection. im running pat on a raspberry pi connected to a signalink USB on my IC-7300, mostly trying to hit the VHF packet gateways around here before i mess with HF. the software connects fine and i can see a bunch of gateways in the list but half the time when i try to connect to one it just times out or gives me a weird error about the session not being acknowledged
i checked the frequency and offset on the gateway listing and it matches what i have dialed in, and the signalink levels look okay to me. VARA FM is installed and pat sees it. my callsign and password are definitely right because i can log into winlink.org just fine. just not sure if this is an RF problem, a software config thing, or if those gateways are just down. is there a way to check which gateways are actually active before you try to connect? feels like im throwing darts blindfolded
also should i be using VARA FM vs plain old packet (AX.25) for VHF? someone told me VARA is faster but im not sure if all the local gateways support it
Link to comment
https://www.hamradiobase.com/forums/topic/4369-winlink-setup-driving-me-crazy-rms-gateway-questions/Share on other sites