field comms setup for county ARES exercise next month — generator questions mostly
Loading...
- Replies 1
- Views 9
- Created
- Last Reply
Top Posters In This Topic
-
Maria Santos 1 post
-
Michael Barnes 1 post
so we have a county-wide ARES activation exercise coming up and i'm trying to get my portable setup dialed in before then. ive done a few of these before but this time i'm actually running the communications node for the EOC so the stakes feel a bit higher than just showing up with a HT and a mag mount.
current plan is to run my IC-7300 off a honda eu2200i with a 40ah lifepo4 battery as a buffer — the generator feeds a battery charger and the radio draws off the battery directly so i dont get that nasty ignition noise bleeding into the audio. worked okay at home testing it but i haven't actually tried it on the air yet.
antenna is where im less confident. thinking a linked dipole for 40/80 since those are the primary nets but the site is a parking lot next to a city building and i have no idea what the RF environment is going to look like or what i have to support the antenna with. was going to bring a couple of 20 ft painters poles and stake them out but that feels marginal for 80m. anyone run a setup like this in a parking lot situation and have thoughts on what actually works vs what sounds good at home?
also genuinely not sure how long to plan on running the generator vs just sitting on battery alone. exercise is supposed to be 6 hours but you know how those go.
Link to comment
https://www.hamradiobase.com/forums/topic/4850-field-comms-setup-for-county-ares-exercise-next-month-generator-questions-mostly/Share on other sites