APRS digipeater not hearing my beacon — missing something obvious?
Loading...
- Replies 1
- Views 22
- Created
- Last Reply
Top Posters In This Topic
-
Ashley Brown21 1 post
-
Jennifer Rodriguez 1 post
so ive been messing with APRS for a few weeks now and i cant figure out why my position beacons arent showing up on aprs.fi. im running a TM-D710G with the internal TNC and ive got it set to beacon every 2 minutes on 144.390, path is WIDE1-1,WIDE2-1. i can hear other stations coming through fine, the squelch breaks and i see packets scrolling on the display so the radio is definitely decoding stuff. but when i search my callsign on aprs.fi nothing shows up or it shows a position from like 3 days ago which was when i had it hooked up to a different antenna outside.
right now im using a mag mount on the windowsill which i know isnt ideal but there should be at least one digi close enough to hear me, aprs.fi coverage map shows a couple within maybe 15 miles. my TX power is set to 5W. is there something in the TNC setup i might have wrong? ive gone through the menu like 4 times and everything looks right to me but obviously something is off
Link to comment
https://www.hamradiobase.com/forums/topic/2235-aprs-digipeater-not-hearing-my-beacon-missing-something-obvious/Share on other sites