Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Why They Can't Hear You: A Link-Failure Troubleshooting Guide for Ham Radio Communication

(0 reviews)

ci_cover.jpg

You tune across the band and hear a station clearly. You call, and nothing comes back. Or you get a reply that says you are barely readable, or not heard at all. It is easy to conclude that you need more power or a new radio. In most cases the real problem is one weak link in a chain, and the cheapest fix is often free.

This guide treats every failed contact as a diagnosable problem. A two-way contact depends on five links: the propagation path, the antennas and feedline, the transmitter, the receiver and its noise environment, and your operating procedure and mode. Work through them in order, change one thing at a time, and you can find the weak link instead of guessing. Nothing here replaces the current text of 47 CFR Part 97 or your equipment manuals, so check both before you change settings, power or antennas.

The Two-Way Contact Is Really Two One-Way Links

A conversation feels like one connection, but it is two separate signal paths: your transmitter to their receiver, and their transmitter to your receiver. Each direction has its own antenna gain, noise level, power and interference. They can differ a lot, which is why hearing someone does not prove they can hear you.

Why "I can hear them" does not mean "they can hear me"

Your receive quality depends on the signal reaching your antenna compared with the noise at your location. Their receive quality depends on your signal compared with the noise at their location. Your ears and their ears are in different places with different problems. A station that sounds strong to you may simply have a better antenna or more power than you do, while your signal arrives weak at their end.

Asymmetry examples

  • Quiet rural versus noisy urban receive sites. A station in a low-noise location can copy weak signals that vanish into the noise floor at a city location. You may hear the rural station easily and be unable to get through to the urban one, or the reverse.
  • Handheld versus station antenna. A handheld with a short flexible antenna is usually at a disadvantage against a station with an outdoor gain antenna. The station may hear you poorly while you hear it well.
  • High power, poor ears. A station with a big transmit signal but a noisy receive environment can be heard everywhere yet hear almost no one. That station is "deaf" even though it sounds loud.

The five-link model as a checklist

  1. Propagation path: can a signal physically get between the two stations on this band, at this time?
  2. Antennas and feedline: is your signal being radiated and received efficiently?
  3. Transmitter and power: is the signal clean, correctly modulated and on the right frequency or settings?
  4. Receiver and noise environment: can the other station, or you, pull the signal out of the noise?
  5. Procedure and mode: is the mode suited to the link, and is the call easy to copy and compliant?

Link 1, The Path: Is the Band Open Between You Two?

Before touching any equipment, confirm that a path exists. A perfect station cannot make a contact over a path that is not there.

Line-of-sight versus ionospheric paths

VHF and UHF FM simplex and repeater work generally depends on near line-of-sight. Hills, buildings and the curvature of the Earth limit range, and the antenna height at both ends matters. HF behaves differently. Signals can be refracted by the ionosphere and return to Earth hundreds or thousands of miles away, so the usable range depends on the state of the ionosphere rather than on a visible horizon.

Time of day, season and solar conditions

The same HF band can be useful at one hour and dead at another. Which bands support which distances changes with time of day, season and the level of solar activity. Do not assume. Check current propagation reports, solar indices and beacon listings from reputable sources on the day you operate, and treat any general rule as a starting guess rather than a forecast.

Quick path tests

  • Listen first. Tune for beacons or other stations in the direction you want. If you hear nothing from that direction, the path may be closed.
  • Use a reception-report tool. Online reports from digital-mode networks show where your signals were received recently, which is useful evidence that your transmit side works.
  • Change the test. Try a nearer station, or a different band. If you can work a nearby station but not a distant one, the path is the likely culprit. If you cannot work anybody, suspect your own station.

Skip distance

On HF, a nearby station can be inaudible while a distant one is strong. Signals launched upward at a steep angle may pass over close-in stations before returning to Earth, leaving a silent zone. If a local friend cannot hear you on a higher HF band but a far-away station can, your station may be fine. A lower band is often better for shorter distances.

Link 2, Antennas and Feedline: The Cheapest Big Improvement

If the path exists, the antenna system is the next suspect. It affects both transmit and receive, which makes it the most efficient place to look.

Height, placement and polarization

Moving an antenna higher or into the clear often does more than adding power, especially on VHF and UHF where range follows line-of-sight. Indoor antennas and antennas near large metal objects suffer from shadowing and distortion of their pattern.

Polarization matters on VHF and UHF. FM repeaters and most handhelds use vertical polarization. If you hold a handheld sideways, or mount a horizontally polarized antenna and try to reach a vertical one, you can lose a significant amount of signal. Match polarization to the stations you want to reach unless you are deliberately working horizontal weak-signal modes.

Feedline loss

Coax loses signal as a function of its type, its length and the frequency. Loss rises with frequency and with length, so a long run of thin coax can waste much of the signal at VHF and UHF. Do not rely on generic numbers. Look up the published loss table for your exact cable from its manufacturer, at your operating frequency, and compare it to your run length. Adding connectors and adapters adds more loss and more places for failure.

Checking SWR properly

SWR tells you how well the antenna system's impedance matches the radio's output. A high reading is a warning that something is wrong, such as a bad connector, a damaged cable or an antenna cut for the wrong band. But SWR has limits:

  • A low SWR does not prove a good antenna. A dummy load has an excellent SWR and radiates nothing. A lossy feedline can also hide a poor antenna behind a low reading.
  • A high SWR does not always mean that you cannot communicate, but it can stress the transmitter and reduce power delivered.
  • Measure at the antenna end if you can, since feedline loss makes the reading at the radio look better than the reality.

A dummy load is a good reference. If the radio and meter behave correctly on a dummy load but badly on the antenna, the fault is in the antenna system, not the radio.

Common failure points

  • Water-damaged connectors and corroded coax ends
  • Poorly soldered or loosely assembled PL-259 connectors
  • Failed or kinked coax, especially after weather exposure
  • Missing or poor radials on a ground-mounted vertical
  • No counterpoise on a portable end-fed or similar setup
  • An antenna installed indoors, or close to metal, wiring or gutters

Link 3, The Transmitter: Power, Modulation and Settings

The decibel reality

Doubling power gains about 3 dB. S-units are only a loose reference, since many receivers do not follow the traditional 6 dB-per-S-unit convention accurately. Under that convention, 3 dB is roughly half an S-unit, which a listener may barely notice. This is why power increases are an expensive way to fix a weak link. Going from a modest power level to ten times as much is about 10 dB, which helps, but the same improvement can sometimes come from a better antenna or cable at far lower cost.

Audio and mode settings that cause "can't hear you" reports

  • Low mic gain: the signal is present but quiet and thin.
  • Over-driven audio: too much gain or compression causes distortion and splatter, which makes you harder to copy.
  • Wrong sideband: on HF voice, the convention is generally LSB on lower bands and USB on higher bands, but confirm the convention for the band you use. Using the wrong one makes speech unintelligible.
  • Wrong repeater settings: an incorrect offset, or a missing or wrong CTCSS or DCS tone, can mean the repeater never opens for you.
  • Digital mode audio levels: too much audio drive into a digital mode creates a distorted, wide signal that is harder to decode.

Power and the rules

Part 97 requires an amateur station to use the minimum transmitter power necessary to carry out the desired communication, and it sets maximum power limits. Limits vary by license class, band and mode. Read the current text of 47 CFR Part 97 for your license class instead of working from memory.

When an amplifier actually makes sense

An amplifier is a late step. It improves only your transmit direction, which does nothing if the real problem is that you cannot hear them or that the path is closed. It makes the most sense after antenna and noise fixes, for weak-signal or DX work, and only with attention to RF exposure evaluation, linearity and legal limits. Check manufacturer specifications for any amplifier you consider, rather than trusting forum claims.

Link 4, The Receiver: Noise Is the Hidden Limiter

Signal-to-noise ratio decides what you can copy

A station is copyable when its signal stands far enough above the noise. A very strong noise floor can hide signals that a quiet location would hear easily. Improving your signal-to-noise ratio, by lowering noise as well as raising signal, can matter as much as anything on the transmit side.

Finding local noise sources

Typical culprits include switching power supplies, LED lighting, chargers, solar equipment and powerline noise. A systematic hunt works better than guessing:

  1. Run a battery-powered receiver in your home and note where the noise is strongest.
  2. Switch off circuit breakers one at a time and listen for changes. Warn others in the house first, and avoid cutting power to anything critical.
  3. Unplug suspected devices individually, and try different chargers and supplies.
  4. Move your antenna away from the suspected source, or try a temporary antenna outside and farther from the house.

Receiver controls that help

  • Preamp: helps on quiet bands with weak signals, but can overload the receiver and raise noise on lower HF bands where external noise already dominates.
  • Attenuator: useful when strong nearby signals overload the front end.
  • Noise blanker: can reduce pulse-type noise, but may distort strong signals when set too aggressively.
  • Filter bandwidth: narrowing it removes adjacent noise and signals, but too narrow can clip the voice or the signal you want.
  • AGC: a poor AGC setting can let loud noise bursts suppress weak signals.
  • Squelch: set too high it can hide weak signals, so open it when testing.

Ferrites, chokes and bonding

Common-mode chokes and ferrites on feedlines and power leads can reduce noise traveling on cable shields. Station grounding and bonding can also affect noise and RF in the shack. Results vary by installation, so test one change at a time and compare before and after.

Link 5, Procedure and Mode: Making It Easy to Be Copied

Choosing a mode for the link you actually have

  • FM: simple and well suited to local and repeater use, but needs a strong signal and is not efficient for weak links.
  • SSB: the usual HF voice mode, more bandwidth-efficient than FM, but more sensitive to tuning and sideband settings.
  • CW and narrow digital modes: can get through when voice cannot, because they concentrate energy in a narrow bandwidth, but they are slower and need operator skill or software and interface equipment.

No mode is best for every link. Pick one that matches your path, equipment and the stations you hope to reach.

Call technique

  • Listen before transmitting, and ask whether the frequency is in use.
  • Do not call over an ongoing contact.
  • Keep calls short, and repeat your callsign clearly using standard phonetics.
  • Pause between calls so others can answer.

Identification and content rules

Verify these in Part 97: station identification at the required intervals and at the end of communication, the prohibition on obscuring the meaning of messages, the restrictions on music and business communications, and the considerations around third-party traffic. Rules differ by situation, so read the current text.

Band plans and etiquette

Stay within your license privileges and subbands. Follow voluntary band plans, which exist to keep different modes from interfering with each other, and always yield to emergency traffic.

Symptom-to-Fix Table

SymptomMost likely linkFirst testCheapest fix
Hear them, they don't hear meAntenna, transmitter or their noiseCheck your reception reports, compare with another station, test on a dummy loadCheck mic gain, mode, tone or offset, then connectors and antenna
Both weakPath or antennaListen for beacons, try a nearer station or another bandChange time or band, raise or reposition the antenna
Strong signal but garbledTransmitter audio or modeCheck sideband, audio level, and listen to your own signal on another receiverReduce mic gain or compression, correct sideband
High SWRAntenna and feedlineTest on a dummy load, then inspect connectorsReplace connectors, check coax, correct antenna length
Works on repeater, not simplexPath or antenna heightCompare with a nearby station on simplexRaise the antenna, correct polarization, reduce feedline loss
Fine at night, poor by dayPathCompare the band at different timesMove to a band that suits the time of day
Noise level high at home onlyReceiver noise environmentBattery-powered receiver test, breakers off one at a timeRemove the noise source, add a choke, move the antenna

Change one variable at a time and keep a log

If you change the antenna, power and mode at once, you will not know what helped. Change one thing, retest, and log the date, band, mode, antenna, power and the report received. Patterns appear quickly, such as a band that is reliably better at certain hours or a fix that did nothing.

Ranking Fixes by Cost and Impact

Free

  • Check settings, tone and offset, mode and sideband
  • Change time of day or band
  • Reposition the antenna and correct polarization
  • Remove local noise sources

Low cost

  • Replace coax connectors
  • Add a common-mode choke
  • Shorten or upgrade feedline
  • Raise the antenna and add radials

Moderate cost

  • A better antenna
  • A receiver or filter upgrade
  • A remote or outdoor antenna location

Highest cost and last resort

  • An amplifier, which improves only the transmit direction and adds RF exposure and compliance responsibilities

Safety and Compliance Checklist Before You Change Anything

RF exposure

Consult the FCC's RF exposure guidance and the evaluation requirements that apply to your power level and bands. Higher power and closer antennas raise exposure.

Electrical and mast safety

  • Stay clear of power lines when raising antennas or masts.
  • Use proper grounding and lightning protection practices.
  • Follow local codes and any HOA or landlord restrictions.

Test responsibly

Use a dummy load for tuning and equipment tests, and operate within your privileges, so you do not interfere with others.

Conclusion and Next Steps

The five links, in short:

  1. Propagation path
  2. Antennas and feedline
  3. Transmitter and power
  4. Receiver and noise
  5. Procedure and mode

A 30-minute diagnostic routine for tonight

  1. Spend five minutes confirming your radio settings: mode, sideband, tone, offset, mic gain and power.
  2. Spend five minutes checking propagation reports and listening for beacons or stations in your target direction.
  3. Spend five minutes inspecting connectors and cable, and checking SWR against a dummy load for reference.
  4. Spend five minutes listening to your local noise level, then unplugging one suspected noise source at a time.
  5. Spend five minutes testing a nearby station or a different band to separate path problems from station problems.
  6. Spend five minutes logging what you found and choosing one change to try next.

Confirm and ask

Confirm current rules from the FCC's published Part 97 and check equipment specifications in the manufacturer's documents. Then ask a local club member or an Elmer for an on-air signal check. A second set of ears in a different location is one of the best diagnostic tools available.

User Feedback

There are no reviews to display.


Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.