Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Measure First, Rebuild Second: A Practical Workflow for Fixing a Troublesome Antenna System

(0 reviews)

When an antenna system underperforms, the usual reaction is to build a different antenna. Sometimes that's right. Often the real culprit is a feed line acting as part of the radiator, a poor ground, a noisy neighbor (electrically speaking), or a tuning problem you could have found in ten minutes with a NanoVNA. Here is a repeatable workflow for working out what's wrong before you cut any wire.

Step 1: Change one thing at a time and write it down

This is the least glamorous advice and the most useful. Keep a simple log: date, band, antenna configuration, what you changed, and what you measured. Noise levels, SWR curves, and received signal reports all vary with time of day and conditions, so a single before-and-after comparison can mislead you. If you change a balun, a feed line, and a radial field in one afternoon, you'll never know which one helped.

Step 2: Use SWR for what it is

SWR tells you how well the load matches the line's characteristic impedance. It does not tell you how efficient the antenna is. A dummy load has a perfect SWR and radiates nothing. A short vertical over a sparse ground system can show a pleasant 1.3:1 while a good share of your power heats the soil.

Useful things SWR can reveal:

  • Resonant frequency: where the dip lands relative to where you want to operate.
  • Bandwidth: a wide, shallow dip can hint at losses; a narrow, deep one usually indicates a cleaner resonance.
  • Changes over time: if the curve drifts after rain, wind, or a season change, something is moving, corroding, or absorbing moisture.

Step 3: Get the most from a NanoVNA

A NanoVNA is excellent for antenna work, but only if you measure carefully.

  • Calibrate at the right place. Perform the open/short/load calibration over the frequency range you're sweeping, at the connector where you'll attach the cable under test. Recalibrate if you change the sweep range significantly.
  • Know your measurement plane. Measuring at the end of a long coax shows the impedance transformed by the line, not the antenna's own feedpoint impedance. With lossy coax the SWR at the shack end looks better than at the antenna, which can hide a bad match.
  • Look beyond SWR. Check the Smith chart or the R and X readouts. Resonance is where reactance crosses zero. If X is zero at a different frequency from your SWR minimum, the feed line or transformer is playing a role.
  • Keep cables and your body clear. Dangling coax and nearby metal can shift readings, especially on small or electrically short antennas.

Step 4: Suspect common-mode current

If SWR changes when you move the coax, touch the cable, or add a few feet of line, you may have common-mode current on the shield. That current turns the outside of the coax into part of the antenna. Symptoms include RF in the shack, odd SWR behavior, a distorted pattern, and increased noise pickup on receive.

Common-mode chokes address this by presenting high impedance to current flowing on the outside of the cable while leaving the signal inside alone. Practical points:

  • Place the choke at the feedpoint of the antenna first. A second one where the cable enters the building often helps with noise.
  • Choke performance depends on the ferrite mix, the number of turns, and the frequency. Many builders use mix 31 for lower HF and mix 43 for higher HF, but check the datasheet for your cores and measure if you can. Winding turns closely on a core raises impedance at lower frequencies, while stray capacitance between turns limits it at higher ones.
  • Test the effect, don't assume it. Compare noise level and SWR stability before and after.

Step 5: End-fed halfwave builds and their counterpoise

An end-fed halfwave (EFHW) is popular because it needs only one high support and one feed point. A matching transformer, commonly in the 49:1 to 64:1 range, converts the very high impedance at the wire's end to something coax can handle. A few cautions:

  • An EFHW still needs something to push against. With no deliberate counterpoise, the coax shield often takes that role, producing the common-mode problems above. A short counterpoise wire and a choke can help.
  • The transformer's core can heat at higher power. Check for warmth during testing, and size the core accordingly.
  • Use the NanoVNA to check the sweep on each band the antenna is intended for. Harmonically related resonances don't always land exactly where you'd hope, especially with nearby objects or sloping wire.

Step 6: Don't neglect the ground system

For vertical antennas, the ground system is half the antenna. For a ground-mounted quarter-wave vertical, many shorter radials generally beat a handful of long ones, because the goal is lowering ground loss near the base. Raised, resonant radials work differently: a few well-placed radials can do much of the job, since they sit above lossy soil. Either way, avoid judging the system by SWR alone. Try comparing received signal strength against a reference antenna, then add radials in stages and see how much each batch improves things. You'll usually see diminishing returns, which tells you when to stop.

Step 7: Hunt noise methodically

If your noise floor is high, find out whether it's coming from inside or outside your house.

  1. Run the radio on battery power, with a portable receiver if possible.
  2. Turn off breakers one at a time and watch the noise. Remember that switching supplies, LED lighting, chargers, and solar equipment are common offenders.
  3. If the noise persists with the whole house off, it may be coming from outside, such as a neighbor or a power line. A directional approach, such as a handheld AM receiver or a small loop, can help you home in on the source.
  4. Check whether adding a choke on the feed line, or moving the antenna farther from the house, reduces it.

Noise measured on a receiver should be compared at the same time of day, on the same band, with the same settings, such as AGC, preamp, and filters.

Step 8: Lightning protection is about reducing risk

No hobby setup can be made immune to a direct strike. What you can do is reduce damage from nearby strikes and induced surges:

  • Disconnect and move coax away from equipment when storms approach, if safe to do so.
  • Bond all station grounds and the entry-point ground together, so equipment doesn't develop dangerous voltage differences.
  • Use a single-point ground or entry panel where cables come in, with surge protection that suits your cable types.
  • Follow local electrical codes and consult a qualified electrician for the building's grounding. Never rely on a hastily driven rod alone.

Documenting before and after

When you finish a change, record:

  • SWR sweep screenshots or saved files for each band.
  • Noise floor readings on several bands at the same time of day.
  • A/B comparisons against a second antenna, if you have one.
  • Photos and sketches of the layout, including wire lengths and choke positions.

Even if results are modest, the record helps you understand what each modification did and prevents repeating experiments. The best antenna improvements often come from small, measurable fixes: a choke at the right place, ten more radials, a corroded connector replaced, or a noisy charger unplugged. Measure first, then decide whether it's time to build.

0 Comments

Recommended Comments

There are no comments to display.

Guest
Add a comment...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.