Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Admin_Terry

Administrators
  • Joined

  • Last visited

Everything posted by Admin_Terry

  1. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in c149b86ad4ceb4a9c4e66180def0e2e1. View the current offer
  2. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in b52c9475daa6a38bbc3f10385c75963c. View the current offer
  3. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 093f8f5de58cd6b2de17fabdfffcece6. View the current offer
  4. until

    QRP ARCI's Spring QSO Party is a low-power (QRP) on-air contest. The organizer's contest page lists it for Saturday 10 April 2027, 0000Z–0600Z.Location: On the air (amateur radio HF bands), worldwide. No physical venue is given. Organizer: QRP Amateur Radio Club International (QRP ARCI) Source: Event information
  5. until

    The European FT8 Club's FT4 DX Contest runs on the 3.5, 7, 14, 21 and 28 MHz bands. Any station may work any other station. Each station can be worked once per band. The mode is FT4, and the exchange is a four-character grid square. Categories are Single Operator and Multioperator, each in Low power (100 W or less) and QRP (5 W or less).Location: Online / on-air worldwide (HF amateur radio bands, FT4 mode); no physical venue stated Organizer: European FT8 Club Source: Event information
  6. until

    ARRL's annual winter VHF/UHF contest. US and Canadian amateurs (including their possessions) try to work as many 2° x 1° Maidenhead grid squares as they can on authorized frequencies above 50 MHz. Stations outside the US and Canada may only work stations in the US, its possessions and Canada. It starts at 1900 UTC on Saturday, January 16, 2027 and ends at 0359 UTC on Monday, January 18, 2027.Location: On the air (amateur bands above 50 MHz); open to stations in the US and Canada, and their possessions. No venue or street address is given. Organizer: American Radio Relay League (ARRL) Source: Event information
  7. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 2d272b3ebac7ee31df69fbcdbb072e79. View the current offer
  8. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 0a18d8b160588725bdf735ed99746c4e. View the current offer
  9. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in f6b407ccf1613a9989b6c8ef9ebeb35a. View the current offer
  10. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 895c35a46e50c87ea21751ce31a5489c. View the current offer
  11. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 646bba046c5fc6f62a5cd7e52157d338. View the current offer
  12. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 45571a9aea7ef039fb4a8ac752324558. View the current offer
  13. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A listing is available in 45571a9aea7ef039fb4a8ac752324558. View the current offer
  14. until

    The Superstition Amateur Radio Club's Superfest is a hamfest and technology swap meet that has run in the desert southwest since 1982. The event runs Saturday, November 7, 2026, from 7:00 AM to 2:00 PM at the Arizona Athletic Grounds. Vendor load-in is Friday, November 6, 6:00 AM to 8:00 PM. A separate hamfest listing gives the admission price as $5 when bought online before Nov 7 and $10 on the day. Kids under 12 are free. The organizer's page gives no timezone. I used America/Phoenix because the venue is in Mesa, Arizona.Location: Arizona Athletic Grounds, 6321 S Ellsworth Rd, Mesa, AZ 85212, USA Organizer: Superstition Amateur Radio Club Source: Event information
  15. Two operators can own the same transceiver and get very different results. One works distant stations easily, while the other struggles to be heard across town. The radio is rarely the reason. A ham station is a chain of parts, and the whole thing performs only as well as its weakest link. This is a planning guide, not a model-by-model review. It gives you a way to define your goal, look at each link from antenna to power supply, and spend money where it improves results most. It avoids prices and product specifications because those change. The principles below do not. Start With the Goal, Not the RadioEquipment decisions get easier once you know what you want to do. A radio that is perfect for a hilltop picnic is a poor choice for a rainy-day ragchew from a basement. Five common operating goalsLocal VHF/UHF chat: repeaters and simplex within your region, usually from home, a car or a pocket.HF voice: ragchewing, nets or chasing distant stations on the shortwave bands.Digital modes: weak-signal modes such as FT8, plus packet and other data modes that need a computer or controller.Portable or field operation: parks, summits and camping, where weight, battery life and quick setup matter.Emergency communications support: reliable local and regional communication with simple, robust gear and backup power.Most people end up with a mix, but pick one primary goal first. It determines which link in the chain deserves your attention. Match your license privileges to your goalTechnician, General and Amateur Extra licenses carry different privileges by band and mode. Before buying HF equipment for a band, confirm that your license class lets you transmit there. Check the current FCC Part 97 rules and the ARRL band chart, because frequency segments and privileges are specific. Equipment can be listening-only until you upgrade, but buying a transmitter for bands you cannot yet use is a common source of wasted money. A short planning worksheetWrite down quick answers to these questions: Where will I operate: home, vehicle, backpack or a mix?Which bands and modes do I want, and which can I legally use now?How much outdoor space do I have, and are there HOA, lease or landlord limits?What is my total budget, and how much am I willing to spend on installation and safety?Do I need to operate during a power outage?Those answers are the foundation for everything else in this article. The Station Signal Chain in Plain LanguageThink of your signal as passing through a series of stages: operator, radio, power, feedline, antenna, the radio path (propagation), and then the other station's antenna and receiver. Every stage can lose or distort something. Your station controls the first several; propagation and the other station are out of your hands. Why the antenna system usually has the biggest influenceThe antenna is where your signal enters or leaves the air, and it affects both transmit and receive. A good antenna improves the signals you send and the ones you hear. Adding transmit power only helps your outgoing signal. That is why the antenna system is so often the best place to start. There are caveats. A radio with a weak receiver can struggle in crowded band conditions, and a noisy environment (from household electronics, nearby power lines or a switching power supply) can limit reception no matter how good the antenna is. The point is not that the antenna always wins, but that you should check it before assuming something else is the problem. Why weakest-link thinking beats buying the most expensive item firstMoney spent on a link that is already adequate gives little improvement. A premium transceiver connected to a poorly installed antenna through lossy cable still sounds like a poor station. A modest radio with a well-placed antenna and good feedline can outperform it. Always ask, "Which link is limiting me right now?" before asking, "What is the best radio?" Link 1: Antennas, Where Most Stations Gain the MostMatch the antenna to the band and goalIn general terms: Verticals are compact, have low-angle radiation and are easy to mount, but they often depend on a good ground or radial system on HF.Dipoles are simple and effective, need support at both ends, and are usually directional broadside to the wire.Loops can perform well and may help reduce some local noise, but designs and sizes vary widely.Beams concentrate signal in a chosen direction and can improve both transmit and receive, but they require more mechanical support and a rotator.Compact or multiband antennas trade efficiency or bandwidth for convenience. They can be a sensible compromise when space is limited, as long as you understand the trade-off.Height, clearance and placementPlacement often matters as much as the antenna type. Keep antennas as high and as clear of metal objects, wiring and noise sources as practical. An antenna beside a gutter or house wiring can pick up noise and distort its pattern. Moving an antenna a few feet away from the building can make a noticeable difference. Resonance and SWR: what they do and do not tell youSWR measures how well the antenna system matches the transmitter's expected load. High SWR can cause protection circuits to reduce power and can signal a fault such as a bad connector. But low SWR does not prove the antenna is efficient. A dummy load shows an excellent SWR and radiates nothing. Use SWR as a health check, not a performance score. Questions to ask before buying or buildingWhich bands does it cover, and does it need a tuner on all of them?What is its power rating for the modes I plan to use? Digital modes have a high duty cycle.How will it be mounted, and what support does it need?Does it fit my HOA, rental or space constraints?Can I safely install it away from power lines?Link 2: Feedline and Connectors, the Quiet LossCoax loss grows with frequency and lengthCoaxial cable loses some signal as heat. Loss increases with frequency and length, so VHF/UHF and long cable runs need low-loss cable. Manufacturers publish loss charts, usually in decibels per 100 feet at various frequencies. As a reference point, 3 dB is roughly half your power. A small loss at HF may matter little, while the same cable at UHF over a long run can waste a lot of both transmit and receive signal. Compare the numbers at your actual band and length, and remember that connectors and any poor splices add to the total. Balanced line versus coaxCoax is convenient and widely used. Balanced line (ladder line or similar) can have very low loss, particularly when an antenna is operated well away from its resonant design and a tuner is used, but it needs a balanced-capable tuner or a balun and care in routing away from metal. Which fits better depends on your antenna, bands and tuner. Common-mode current and RF in the shackSometimes current flows on the outside of the coax shield, which can cause RF feedback, interference with household devices, distorted audio or added noise. Common-mode chokes or baluns at the feedpoint or near the radio can help, but they are not a guaranteed fix. The cause could also be antenna imbalance, poor routing or proximity to wiring. Treat chokes as a tool, not magic. Connectors and weatherproofingCommon connectors include PL-259/SO-239 (UHF), N, BNC and SMA. Typical failure points include: Poorly soldered or crimped center conductors and shields.Water entering outdoor connections, which corrodes the cable and raises loss.Mismatched or worn adapters, since each adds a point of failure.Strain on the connector from a cable hanging unsupported.Use quality connectors and weatherproof outdoor joints according to the manufacturer's guidance. Link 3: The Radio Itself, What Specifications Actually MatterHandheld, mobile and base/HF transceiversHandhelds are portable and affordable but have limited power and small antennas, which is why an external antenna helps so much. Mobile radios offer more power and fit a vehicle or desk. Base and HF transceivers cover the shortwave bands and typically give better receiver performance and more control, at higher cost and with extra requirements for antenna and power. Receiver traits and lower-priority featuresFor a crowded band, selectivity (the ability to reject nearby signals), dynamic range (handling strong signals without overload) and effective noise reduction matter more than most flashy features. Color screens, extensive menu options and built-in extras are nice but rarely decide whether you make contacts. Beginners are often better served by a clear manual and straightforward controls. Output power in contextA small power increase rarely changes the outcome much. Doubling power is only about 3 dB, which is a small step on a typical receiver's scale. An antenna or feedline improvement of several dB often does more, and it helps receiving too. Before considering an amplifier, make sure the antenna system is solid, and remember that higher power also affects RF exposure obligations. New versus usedUsed gear can be good value. When buying, ask about condition, repairs and modifications, test it on the air if possible, check for physical damage and verify that necessary accessories, cables and firmware are included or available. Be wary of listings that make performance claims without evidence. Link 4: Power, Supplies, Batteries and NoiseSizing a supply or batteryCheck your transmitter's current requirement in the manual, then choose a supply that exceeds it with headroom so it is not working at its limit. Use wire gauge appropriate for the current and cable length, since thin wire causes voltage drop that can degrade transmit signals. Fuse the positive lead close to the power source, following the radio manufacturer's instructions. Switching supply noiseSome switching supplies generate RF noise that raises the receive noise floor. If you hear new noise, try turning the supply off or powering from a battery briefly to compare. Ferrite chokes on DC and AC leads, better cable routing, or a different supply may help. Test one change at a time. Batteries for portable and emergency useDifferent battery chemistries trade weight, capacity, cost, voltage behavior and charging requirements. Whatever you choose, follow the manufacturer's safety guidance for charging, storage and protection, and make sure the battery can supply your radio's transmit current. Link 5: Grounding, Lightning and RF SafetyThree different jobsSafety grounding, lightning protection and RF grounding are not the same thing. Safety grounding protects against electrical faults, lightning protection manages surge paths and RF grounding affects antenna performance and common-mode behavior. Follow local electrical codes, the manufacturers' instructions and qualified professionals for installation. No arrangement can guarantee protection against a direct strike, so disconnecting equipment when not in use is a common precaution. RF exposureOperators are responsible for complying with FCC RF exposure rules. Exposure depends on your power, band, mode, duty cycle and how close people are to the antenna. Use the FCC's and ARRL's RF exposure resources and calculators for your own setup, especially when you increase power or put an antenna near living spaces. Safe tower, roof and mast workStay far clear of power lines and plan where a falling antenna could land.Use proper fall protection and appropriate equipment.Do not work alone, and do not climb in bad weather.If a job is beyond your skill, hire a qualified professional.Link 6: Accessories That Improve OperatingMicrophones, headsets and audioClear transmit audio gets more contacts than extra power. A suitable microphone or headset, sensible gain settings and modest processing help. Avoid overdriving the microphone or using excessive processing, which can splatter and sound worse. Test equipmentA dummy load lets you test a transmitter without radiating. An SWR/power meter helps verify what the station is doing. An antenna analyzer is valuable when you build or tune antennas. These are worth buying early because they make every other upgrade measurable. Interfaces and softwareLogging software, rig control and computer interfaces become worthwhile when you work digital modes, contest or keep many contacts. They are not necessary on day one for casual voice operation. Four Goal-Based Example BuildsThese are categories, not product endorsements. Local VHF/UHF starterA handheld or mobile radio, plus a better external antenna and low-loss coax. The biggest improvement is usually the antenna and feedline, not the radio. First HF voice stationAn HF transceiver, an appropriately sized DC supply, a simple dipole or vertical, a common-mode choke and basic SWR/power metering. Confirm your license privileges first. Digital-mode stationA radio with an audio or CAT interface, a computer, an accurate time source and care to avoid overdriving the audio. Many digital modes need accurate clock synchronization, and overdriven audio creates distorted, wide signals. Portable/field kitA lightweight antenna, a battery, a short feedline, basic tools and spares. Simplicity and quick setup beat complexity in the field. How to Find Your Weakest Link: A Diagnostic RoutineDefine the symptom: can't hear, can't be heard, noise, RF in the shack or poor audio.Isolate: swap or test components one at a time, using a dummy load, a different cable or a battery instead of the supply.Change one variable at a time: and write down what you changed and what happened.SymptomLikely causesFirst thing to checkCan't hear stationsPoor antenna, high noise, feedline lossAntenna placement, connectors, local noise sourcesCan't be heardLow antenna efficiency, loss, poor audioSWR, cable condition, microphone gainHigh noiseSwitching supply, household devices, common-mode currentTurn off supply and devices, try battery powerRF in the shackCommon-mode current, unbalanced antennaChoke placement, cable routingDistorted audioOverdriven mic, RF feedback, low supply voltageGain settings, voltage under transmitBudgeting Order and Common MistakesA suggested orderFor many stations the order is: safe power and basic metering, a good antenna in a good location, adequate feedline and connectors, then radio upgrades, then accessories. It changes with the goal. A portable station may put battery and a light antenna first, while a digital station may need an interface sooner. Mistakes to avoidBuying a high-power amplifier before fixing the antenna.Ignoring feedline loss, especially at VHF/UHF.Trusting unverified advertising claims.Skipping safety checks on grounding, power wiring and RF exposure.Buying for bands you cannot yet legally operate.Before You Transmit: A Short Compliance ReminderConfirm your license class and band privileges.Identify with your call sign as required.Observe power limits and band-plan etiquette.Follow RF exposure rules for your power, mode and antenna location.Verify details in the current FCC Part 97 text rather than relying on this article. Key Takeaways and Next StepsStart with your operating goal, then evaluate each link in the chain.The antenna system is usually the best first place to look, but check noise and receiver limits too.Feedline, connectors and power wiring quietly decide how much of your signal survives.Change one variable at a time when troubleshooting.Put safety and compliance ahead of performance.Write down your goal and sketch your chain, then list one upgrade per link and rank them by likely benefit. Share your setup and questions with the community; other operators can help you spot the weakest link.
  16. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A marketplace offer is available in 05225ca1887317aafbc5572ccdc803e6. View the current offer This is an affiliate marketplace offer. We may earn a commission from qualifying purchases. Prices and availability are shown on the offer page and checked at the retailer.
  17. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A marketplace offer is available in 987560de1c521932dae019dad1dc6d9b. View the current offer This is an affiliate marketplace offer. We may earn a commission from qualifying purchases. Prices and availability are shown on the offer page and checked at the retailer.
  18. NO LONGER AVAILABLE — This offer has expired or been withdrawn. Browse current offers. A marketplace offer is available in 05225ca1887317aafbc5572ccdc803e6. View the current offer This is an affiliate marketplace offer. We may earn a commission from qualifying purchases. Prices and availability are shown on the offer page and checked at the retailer.

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.