Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a first POTA activation: park reference, 10 QSOs, spotting, and logging, what actually matters?

ci_cover.jpg

I'd like to collect practical advice for someone planning their first Parks on the Air activation, and for hunters who want to understand what the activator is dealing with. Here's the basic framework as I understand it. Please correct anything that's off or that changes with updated program rules.

Park references. Every park has a reference in the form of a prefix and number, like K-0001 for a US park. Look up the exact reference on the POTA site or app before you go, because a similar name or a park next to a state forest can have a different reference. The reference goes in your spot, your log, and ideally on a note in front of you so you don't give the wrong one on the air.

Activator vs. hunter. The activator operates from inside the park boundary. The hunter works the activator from anywhere, including home. Hunters get credit per park worked, and activators need at least 10 QSOs in a single UTC day for the activation to count. Watch the UTC rollover if you start late in your local evening, because contacts on either side of 0000Z don't combine into one activation.

Getting the contacts. Calling CQ POTA and getting spotted usually does most of the work. You can self-spot through the POTA site or app, and for CW and digital modes automated skimmer spots can help, but don't count on them. Update your spot if you change frequency or band. Hunters, a quick tip: listen for a full exchange before calling, and keep your report short, since a pileup can clear much faster that way.

Antenna and power. Lots of people run QRP or around 5 to 100 watts with a portable antenna like an end-fed half-wave, a linked dipole, a vertical with radials, or a wire hung in a tree. Whatever you choose, check the park's rules first. Some parks restrict trees, stakes, or where you can park, and some have closing hours or areas that are off limits. Bring a way to log if your phone has no signal.

Logging. Log each contact with callsign, date and time in UTC, band, mode, and RST. For upload, the POTA site wants an ADIF file that includes your park reference, and hunters can also log the park they worked. If you did a two-fer, meaning you were in a spot where two park references overlap, include both references so each park gets credit. If you rove between parks, each park needs its own 10 QSOs.

Questions for the group: What's your preferred logging setup in the field (paper, a logger on a phone or laptop, or the POTA app)? What's the best way to handle spotting when you have weak cell service? And for newer hunters, what tells you an activator is worth the effort of a call versus waiting for the pileup to thin out?

  • Replies 2
  • Views 46
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On logging, whatever you choose, make the park reference part of the template, not something you type each time. Most logging programs for portable operation have fields for your own park (MY_SIG_INFO in ADIF terms) and the hunter's park if they're also activating. Do a test export before you leave and open the ADIF in a text editor to confirm the park field is actually there. It's much easier to fix the setup at the picnic table than to try to repair a file later.

For the UTC issue, I'd write the UTC start time on your notes. Some people plan to get 10 contacts before 0000Z and then start a second activation if they're still on the air. If you're close to 10 as the day rolls over, it's worth knowing that the contacts after the change count toward a new UTC day.

Also, check whether the park has any extra permit or hours requirement. The POTA park page usually has links and notes, but the park agency's own website is the authority on what you're allowed to do.

  • Moderators

For spotting with weak signal, set up your spot text before you lose service: reference, frequency, mode, and a short comment such as "QRP" or "CW only." If you can't spot at the field, you can ask a friend to do it, or you can start on a calling frequency and let CW or digital skimmers pick you up. Don't rely on that, though. An accurate spot is the single biggest help for hunters.

As a hunter, I'd say go ahead and call when the activator is working stations, but listen first. If the activator is running split, only taking the last two letters of a callsign, or on CW only, you'll get through faster by following that pattern. Don't keep sending your call over a QSO in progress. One clean call, then listen.

For a two-fer, say both references on the air if you can, but keep it brief. The activator still has to log them correctly, so hunters should be patient if the exchange takes a little longer.

And for antennas: a simple, quick-to-deploy wire is a good first-time choice. Setup time counts as operating time, and a rushed, over-complicated station tends to cost more contacts than a small amount of extra power would gain.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.