Reading band conditions: how do you combine SFI, K index, VOACAP and live spots before calling CQ?
- Replies 2
- Views 47
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Mike 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Propagation numbers are easy to collect and hard to interpret. Solar flux, A index, K index, MUF maps, WSPR spots and beacon checks can all point in slightly different directions, so I'd like to compare how people combine them into a decision about which band to try.
Here is the basic framework I'm working from. The 10.7 cm solar flux (SFI) is a proxy for the ionizing radiation that builds the F layer. Higher SFI generally means a higher MUF, which opens 15, 12 and 10 meters, though it doesn't guarantee a particular path is open. The A index is a daily average of geomagnetic disturbance, and the K index is a 3-hour reading on a roughly logarithmic 0-9 scale. Elevated A and K values often (not always) mean a depressed or unstable F2 layer, especially on paths near the poles. A quiet field with moderate flux can beat a high flux number during a geomagnetic storm.
Then there is the day/night split. The D layer forms in daylight and absorbs lower HF signals, which is why 80 and 40 meters are often poor for long distances at midday but work well for local and regional contacts. After sunset the D layer fades quickly and the lower bands open up. The gray line, the band around the terminator, can give enhanced paths where one end is still dark and the other is just getting daylight, especially on 160 through 30 meters.
Short-term modes complicate things. Sporadic E can open 10 meters, 6 meters and sometimes 2 meters for a few minutes or a few hours, with no relationship to the solar flux. Tropospheric ducting on VHF and UHF depends on weather, particularly temperature inversions and high-pressure systems, not solar activity at all. For regional work, NVIS on 80, 60 or 40 meters (high takeoff angle, with the operating frequency kept below the critical frequency of the F2 layer) is really a different problem from DX.
On the tools side, VOACAP-based predictors give a monthly median forecast of reliability and SNR for a given path, power, antenna and smoothed sunspot number. They are good for planning, but they can't tell you whether a flare or a sporadic E cloud is changing things right now. For right-now checking, WSPR (wsprnet.org), PSK Reporter, the Reverse Beacon Network and the NCDXF/IARU beacons on 14.100, 18.110, 21.150, 24.930 and 28.200 MHz show what is actually being heard.
So, two questions for the thread. What order do you check things in before choosing a band? And when predictions and live spots disagree, which do you trust, and for what kinds of paths?
Link to comment
https://www.hamradiobase.com/forums/topic/10780-reading-band-conditions-how-do-you-combine-sfi-k-index-voacap-and-live-spots-before-calling-cq/Share on other sites