Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Band plans vs. license privileges: how do I work out where to operate and where the edges really are, 160 m through 33 cm?

ci_cover.jpg

I'm trying to build a mental map of the amateur bands, from 160 meters up to 33 centimeters. I keep running into three different kinds of information and can't tell how they fit together. There are the FCC rules for my license class, the ARRL band plan, and what people actually do on the air, like FT8 clustering on certain dial frequencies or everyone calling on 146.52.

Specific questions:

1) How strictly do I treat the phone, CW and digital segments on HF? Is the band plan a rule or a courtesy?

2) How close to a band edge can I put my dial frequency in USB or LSB without splattering out of the band?

3) What are the simplex calling frequencies worth memorizing on 6 m, 2 m, 70 cm and 33 cm?

4) How do the 60 meter channels work, and how do license classes and international allocations change the picture if I travel or work DX?

Corrections welcome. Please flag anything that's likely to have changed, since I'd rather not rely on an outdated chart.

  • Replies 2
  • Views 41
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

Start by separating law from convention. The FCC rules in Part 97 (the privileges in §97.301 through §97.305 and the power limits) are legal requirements. The ARRL band plan is a voluntary agreement about how to share space. It isn't enforceable, but ignoring it is how you end up parked on top of a weak-signal net or a beacon. Check the legal edge first, then the band plan inside it.

For HF in the US, the rough shape by license class is this. General and Extra share most of the plan, and Extra adds the bottom slices of several bands. Technicians get CW-only segments on 80, 40 and 15 m (about 3.525 to 3.600, 7.025 to 7.125, and 21.025 to 21.200 MHz). They also get 28.000 to 28.500 MHz on 10 m, with data and CW below 28.300 and SSB above it, all at a 200 W PEP limit on HF. General gets the following phone segments:

- 80 m: about 3.800 to 4.000 MHz
- 40 m: about 7.175 to 7.300 MHz
- 20 m: about 14.225 to 14.350 MHz
- 15 m: about 21.275 to 21.450 MHz

Extra gets wider phone sections just below those, for example 3.600 to 3.800 on 80 m and 14.150 to 14.225 on 20 m. General also gets 160 m, 17 m, 12 m and 10 m in full, plus the 30 m band (10.100 to 10.150 MHz, CW and data only, 200 W PEP limit). Verify the exact numbers against the current §97.301 and §97.305 tables before you rely on my rounding. Novice and Advanced licenses are no longer issued, but existing holders keep their privileges.

The band plan then subdivides the legal segments. CW and narrow digital modes sit at the bottom of each band's CW/data section, and phone sits in the phone segment. There are also customs, like the DX windows on 80 m and 40 m and a general rule that you don't call CQ on a frequency without listening first. Digital activity clusters around conventional dial frequencies. FT8 is commonly found at about 1.840, 3.573, 7.074, 10.136, 14.074, 18.100, 21.074, 24.915, 28.074 and 50.313 MHz, all USB dial frequencies. Those sit inside the CW/data segments on HF, but your signal extends a few kHz above the dial frequency, so make sure that's still legal for your class.

On band edges, think about where the signal sits relative to the dial. In USB the occupied bandwidth extends upward from the dial frequency, so near an upper edge like 14.350 you need the dial well under it, with the whole signal about 3 kHz wide inside the limit. In LSB the signal extends downward, so near a lower phone edge like 3.800 for a General you need to dial above it (3.803 or more, to be safe) so the lower sideband doesn't fall outside the segment. Dial calibration errors and transmit filter skirts add to the risk, so leave margin and don't try to hit the exact edge.

  • Moderators

For VHF/UHF, here's a rough map. These are the commonly used calling frequencies from the ARRL band plan, but local coordinators can allocate differently, so check your local plan.

6 m (50 to 54 MHz, Technician and up): the bottom of the band is CW and beacons, with SSB above about 50.1. 50.110 MHz is the intercontinental DX calling frequency and 50.125 is the domestic SSB calling frequency. 52.525 MHz is the FM simplex calling frequency, and FT8 is commonly at 50.313.

2 m (144 to 148 MHz): the weak-signal section is at the bottom of the band (CW and SSB, around 144.100 to 144.300), with 144.200 as the SSB calling frequency. Further up are beacons, the FM repeater sub-bands, a satellite section around 145.8 to 146.0, and FM simplex including 146.520 as the national calling frequency. APRS in North America is on 144.390.

70 cm (420 to 450 MHz in the US): 446.000 is the national FM simplex calling frequency. Weak-signal CW/SSB calling is around 432.100, and there are satellite and repeater sections elsewhere in the band. There are geographic restrictions in parts of 420 to 450, especially near the Canadian border and certain radar sites, so check the footnotes in §97.303.

33 cm (902 to 928 MHz): this band is allocated to amateurs in ITU Region 2 only (the Americas), and it's shared with ISM and Part 15 devices, so expect noise. 903.100 is the weak-signal calling frequency. FM simplex use is more local, so check what your area uses.

60 m is different from the other HF bands because it's channelized, not segmented. General and Extra can use five channels with a 100 W PEP ERP limit (relative to a half-wave dipole). The channel center frequencies are 5.332, 5.348, 5.3585, 5.373 and 5.405 MHz, and the USB suppressed-carrier dial settings are 5.3305, 5.3465, 5.3570, 5.3715 and 5.4035 MHz. Rules for this band have been revised over time, including a newer segment under secondary international allocation, so check the current §97.303 text and the ARRL page before you transmit.

Internationally, the world is split into three IARU regions, and the allocations differ. Region 2 gets 3.5 to 4.0 MHz on 80 m and 7.0 to 7.3 on 40 m, while Region 1 (Europe, Africa, the Middle East) has 3.5 to 3.8 and 7.0 to 7.2. 2 m is 144 to 148 in the US but 144 to 146 in Region 1, and 70 cm is 430 to 440 there. IARU regional band plans also set their own subdivisions, so a DX contact's idea of 'the phone segment' may not match your chart. If you operate abroad, the rules are the host country's (CEPT or reciprocal arrangements), not your home license class, so check those before transmitting.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.