Building a tiered go-kit: HT, mobile, power, antennas and the family plan. What does yours look like?
- Replies 2
- Views 37
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Terry 1 post
-
Mod_Dan 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Most of the go-kit threads I read end up as one big pile of gear. A better way to think about readiness is in tiers, so you always have something useful with you and can scale up when you have time. Here is a framework to pick apart, and I'd like to hear where yours differs.
Tier 1: the pocket and bag layer. This is an HT with a spare battery or an AA battery case, a better antenna than the stock rubber duck (a flexible whip or roll-up J-pole), a short coax adapter, a small notepad and pencil, and a printed card with local repeaters, simplex calling frequencies, and family contact numbers. Add a small NOAA weather radio, or an HT that receives the 162 MHz weather channels. If your phone is your only list of frequencies, a dead phone means no list.
Tier 2: the grab-and-go bag. This is the 72-hour layer: a dual-band mobile or a higher-power HT, a power source, a real antenna, and your supplies. Pack it so it can be in the car in two minutes. Keep radio gear and personal survival gear in separate pouches so you can hand the radio bag to someone else. Include a headlamp, spare batteries, basic first aid with any personal medications, water and food, a paper map of your area, and a copy of your license and any served-agency credentials.
Tier 3: the vehicle and home base layer. This covers a mobile rig, a 12 V battery with fusing, a bigger antenna system, and possibly HF. Here power planning matters most.
Do the power math before you buy. Watt-hours are amp-hours times voltage. A 20 Ah battery at 12 V holds roughly 240 Wh on paper, and you won't use all of it. A 50 W mobile radio can draw around 10 to 12 A on high-power transmit but only an amp or so receiving. Most emergency radio time is listening, so average draw is far lower than the peak. Write down your radio's receive current, transmit current, and the duty cycle you expect, then size the battery from that, with margin. LiFePO4 packs are popular because they give usable capacity at a steady voltage, but whatever you use, put a fuse near the battery and use connectors your group has standardized on. Anderson Powerpoles are the common choice, and matching polarity and orientation with your local group avoids mistakes.
Solar is a supplement, not a guarantee. A panel's rated wattage is a best case. Real output depends on angle, clouds, temperature, and cable losses. Use a proper charge controller, and check for RF noise. Some cheap controllers and inverters generate hash that wipes out HF reception, so test the whole setup with the radio running before you rely on it.
Antennas. A kit might hold a roll-up J-pole or slim-jim for 2 m/70 cm, a magnetic-mount mobile antenna, a quality length of coax with the right connectors (and adapters for SMA, BNC, and PL-259), paracord, a light throw weight, and a mast option such as a painter's pole or a collapsible fiberglass mast. If you do HF, an end-fed half-wave or a simple dipole with a balun and a tuner or analyzer is easy to deploy. Practice setting it up in a park, not for the first time in the dark.
Family communications plan. Not everyone in the family is licensed, and that shapes the plan. FRS radios need no license. GMRS needs an FCC license, and one license covers the licensee's immediate family. MURS has five VHF channels, requires no license, and allows external antennas, which gives it a range advantage over FRS in some setups. Be realistic about range, because all of these are line-of-sight services and are easily blocked by terrain and buildings. A good plan includes an out-of-area contact, a meeting place for each scenario, a set check-in schedule, and a fallback channel that everyone has written down. Teach kids and relatives to press the button, say who they are, and listen. Remember that ham frequencies can only be used by licensed operators, and your plan should reflect who can transmit on what.
Grid-down planning. Decide ahead of time whether you will monitor your local repeater, a simplex frequency, or an ARES or club net, and know what happens if the repeater loses power. Many repeaters have battery or generator backup, but not all do, and you should know your simplex fallback and have a plan for relaying messages. Keep paper copies of net procedures and message forms.
Questions for the group: what is the one item you added to your kit that you wish you had thought of sooner? How do you handle battery rotation and testing? Do you run a separate kit for the family, or one kit for everything?
Link to comment
https://www.hamradiobase.com/forums/topic/10812-building-a-tiered-go-kit-ht-mobile-power-antennas-and-the-family-plan-what-does-yours-look-like/Share on other sites