ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Element 4 prep: what's the best way to handle the op amp, filter, and Smith chart questions?
I'm asking this as a general study question for anyone working toward the Amateur Extra license. Element 4 is 50 questions drawn from the public question pool, and the passing score is 37 correct (74%). Some of the pool is plain regulation recall, but a lot of it is theory that rewards understanding over rote memorization: transistor and op amp circuits, active and passive filters, oscillators, modulation, receiver and transmitter design, antenna theory, and the Smith chart.
Here's how I'd break the material down, and I'd like to hear where others would change it.
Op amps and transistors. A handful of relationships cover many questions. An inverting amplifier has gain of -Rf/Rin, and a non-inverting amplifier has gain of 1 + Rf/Rin. Know the ideal op amp assumptions (very high input impedance, virtual short between inputs when negative feedback is used). For transistors, focus on bias point, class of operation (A, AB, B, C) and what each means for efficiency and linearity, plus the common-emitter, common-collector and common-base configurations.
Filters and oscillators. Learn the differences between Butterworth (flat passband), Chebyshev (ripple in exchange for a steeper roll-off) and elliptical filters. Know what shape factor means for a receiver IF filter. For oscillators, know the Colpitts (capacitive divider), Hartley (tapped inductor), Pierce (crystal), and the role of a PLL and DDS in modern synthesizers.
Modulation and design. FM modulation index is deviation divided by modulating frequency. Be able to explain why SSB is more spectrum-efficient than AM, what PEP is, and what causes intermodulation, blocking and reciprocal mixing in receivers. Dynamic range is a key concept in the design questions.
Antennas and the Smith chart. Expect questions on radiation resistance, ground effects, beamwidth, gain in dBi versus dBd, and feed line behavior. For the Smith chart, remember that the center of the chart is a normalized match (1 + j0), that moving around the outer edge once corresponds to half a wavelength of line, and that moving toward the generator is clockwise. Once you can read the chart, several question types become easy.
Part 97. Don't skip the rules. Station control, remote operation, third-party traffic, space and telemetry operation, and the Extra-exclusive frequency segments are all fair game. Band edges are exactly the kind of detail to confirm in 47 CFR 97.301 through 97.305 rather than from memory or an old chart.
My question for the group: do you work through the pool by topic and learn the concepts first, or do you drill questions until the patterns show up? And how do you handle the calculation questions when you can't use shortcuts?
I'm asking this as a general study question for anyone working toward the Amateur Extra license. Element 4 is 50 questions drawn from the public question pool, and the passing score is 37 correct (74%). Some of the pool is plain regulation recall, but a lot of it is theory that rewards understanding over rote memorization: transistor and op amp circuits, active and passive filters, oscillators, modulation, receiver and transmitter design, antenna theory, and the Smith chart.
Here's how I'd break the material down, and I'd like to hear where others would change it.
Op amps and transistors. A handful of relationships cover many questions. An inverting amplifier has gain of -Rf/Rin, and a non-inverting amplifier has gain of 1 + Rf/Rin. Know the ideal op amp assumptions (very high input impedance, virtual short between inputs when negative feedback is used). For transistors, focus on bias point, class of operation (A, AB, B, C) and what each means for efficiency and linearity, plus the common-emitter, common-collector and common-base configurations.
Filters and oscillators. Learn the differences between Butterworth (flat passband), Chebyshev (ripple in exchange for a steeper roll-off) and elliptical filters. Know what shape factor means for a receiver IF filter. For oscillators, know the Colpitts (capacitive divider), Hartley (tapped inductor), Pierce (crystal), and the role of a PLL and DDS in modern synthesizers.
Modulation and design. FM modulation index is deviation divided by modulating frequency. Be able to explain why SSB is more spectrum-efficient than AM, what PEP is, and what causes intermodulation, blocking and reciprocal mixing in receivers. Dynamic range is a key concept in the design questions.
Antennas and the Smith chart. Expect questions on radiation resistance, ground effects, beamwidth, gain in dBi versus dBd, and feed line behavior. For the Smith chart, remember that the center of the chart is a normalized match (1 + j0), that moving around the outer edge once corresponds to half a wavelength of line, and that moving toward the generator is clockwise. Once you can read the chart, several question types become easy.
Part 97. Don't skip the rules. Station control, remote operation, third-party traffic, space and telemetry operation, and the Extra-exclusive frequency segments are all fair game. Band edges are exactly the kind of detail to confirm in 47 CFR 97.301 through 97.305 rather than from memory or an old chart.
My question for the group: do you work through the pool by topic and learn the concepts first, or do you drill questions until the patterns show up? And how do you handle the calculation questions when you can't use shortcuts?
Link to comment
https://www.hamradiobase.com/forums/topic/10826-element-4-prep-whats-the-best-way-to-handle-the-op-amp-filter-and-smith-chart-questions/Share on other sites