Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Choosing a handheld: FT-65R vs Baofeng vs ID-52A vs TH-D75 (and where the IC-705 fits)

ci_cover.jpg

I'd like to collect some practical advice on handheld radios (HTs) in one thread. The category runs from budget analog FM radios to digital-capable models that cost many times more, and the right choice depends on what you want to do with it.

Analog dual-banders. The Yaesu FT-65R and the Baofeng UV-5R family are both 2 m/70 cm FM handhelds at roughly 5 W or less. The FT-65R is generally regarded as the more conventional radio, with better receiver behavior and a more robust build. The Baofengs cost less and have a huge accessory ecosystem, but their transmitted spectral purity and receiver selectivity are often criticized. In a crowded RF environment, such as near a high-power site, this can matter.

Digital-capable handhelds. The Icom ID-52A is a D-STAR dual-bander with GPS and Bluetooth. The Kenwood TH-D75 is a tri-band radio (2 m, 1.25 m, 70 cm) with D-STAR, built-in GPS and APRS features. Both are far more capable than the analog radios, but you only get the benefit if there is D-STAR activity near you and you are willing to register and learn callsign routing. DMR handhelds are a separate category. They are usually cheaper, but they depend on a codeplug, a DMR ID, talkgroups, time slots and color codes.

The IC-705. It is not really an HT. It's a portable HF/VHF/UHF all-mode transceiver with D-STAR support, and it's better suited to portable operating than to carrying on your belt. Compare it to an HT only if you also want HF and SSB.

Questions for the thread:

  • What should a new licensee buy first: a cheap radio to learn on, or one good radio that will last?
  • Is the digital feature set worth the money if you mostly use local analog repeaters?
  • What do you consider the best battery and antenna setup for emergency use?
  • What is the most common mistake when programming a radio with CHIRP?
  • Replies 2
  • Views 40
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

For a first radio, I'd split the decision by use. If the plan is local repeaters, simplex, and checking into nets, an analog dual-bander like the FT-65R covers nearly everything. A cheap Baofeng works too, but it's worth budgeting for a better antenna, because the stock rubber duck is usually a weak link. A common upgrade is something like a Nagoya NA-771, or a quality aftermarket whip. Check the connector first, since SMA male and female versions are easy to mix up.

On CHIRP, the sequence that avoids most disasters is to download the current configuration from the radio first and save that image before changing anything. Then edit, then upload. Use the correct radio model profile, because a near-match can write bad data. Cheap programming cables are a frequent source of trouble, usually because of the driver chipset, and not necessarily the radio.

For repeater entries, the convention in the US is that 2 m repeaters typically use a 600 kHz offset, and 70 cm repeaters use 5 MHz. Whether the offset is plus or minus depends on where in the band the repeater's output frequency sits, and it varies by region. Use a repeater directory or your local coordinator's band plan to confirm it. Also check whether the repeater needs a CTCSS (PL) tone for transmit. A very common reason someone can hear a repeater but can't open it is a missing or incorrect tone.

  • Moderators

On digital: D-STAR and DMR sound similar, but they behave differently day to day. With D-STAR (ID-52A, TH-D75) you register your callsign with a gateway and set fields such as MYCALL, URCALL and RPT1/RPT2 to route calls. Many modern radios simplify this, but the concepts still matter. With DMR you need a radio ID, and your codeplug has to match the repeater's color code, time slot and talkgroups. A bad codeplug is the usual cause when a DMR radio hears audio but can't be heard. Before you buy, look at what's actually active near you. A digital radio is a poor purchase if the nearest D-STAR repeater is dead quiet.

For emergency use, I'd stress that a radio is only part of the plan. Carry spare batteries, and consider a battery case that takes AA cells if your model supports one, so you aren't depending entirely on a lithium pack you couldn't charge. A better antenna gives you more practical range than extra power from a small handheld. Program your local repeaters, the simplex calling frequencies for your region, and any emergency net frequencies your local group publishes. Know your repeaters' tones and offsets in advance, because you won't want to look them up during an outage. Practice by joining nets, so that using the radio under stress is familiar.

One caution on licensing: an amateur HT only transmits legally on amateur frequencies within your license privileges. Many cheap radios will also tune GMRS, FRS and business frequencies, but being able to key up on them doesn't mean you're allowed to. Check the rules and equipment requirements for each service in your country.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.