Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Part 97 compliance Q&A: ID timing, third-party traffic, power, RF exposure, spurious emissions, control operation and renewal

ci_cover.jpg

Part 97 questions tend to arrive in clusters, so this thread collects the common ones in one place. The aim is practical answers that point you to the rule you can read yourself. Rules get amended, so check the current text of 47 CFR Part 97 on eCFR before relying on any detail here, especially the numbers.

Here are the questions to start with:

1) When exactly do I have to identify, and does a tactical call or a club nickname count? 2) What counts as third-party traffic, and can an unlicensed friend talk on my radio? 3) How are power limits actually measured, and do Technicians have different limits? 4) What makes a transmission prohibited: business, music, encryption, or something else? 5) Do I need to do an RF exposure evaluation for a typical home station? 6) What are the spurious emission requirements, and do they apply to a homebrew or surplus amplifier? 7) How do auxiliary stations, remote control and automatic control fit together with the control operator requirement? 8) What does FCC enforcement look like in practice, and how do license term and renewal work?

Please quote the section number when you can, and say whether you are describing the rule itself or common practice. Those two get mixed up a lot.

  • Replies 2
  • Views 41
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

I'll take the first four.

Station ID (§97.119). You must give your call sign at the end of each communication and at least every 10 minutes during a communication. You do not have to ID at the start of a contact. People often assume you do, but the rule is the end of the exchange plus the 10-minute interval. The call sign must go out by a method that is legal on that channel: CW, phone in English, or the data or image mode you are actually using. Phonetics are encouraged but not required. A tactical call such as "Net Control" or "Aid Station 3" is fine for operational clarity, but it does not replace the FCC call sign. The ID is still required on the schedule above.

Third-party traffic (§97.115). This is easy to over-apply. "Third party" means a message passed on behalf of someone who is not one of the two control operators. A friend sitting next to you is not a problem in itself. An unlicensed person can take part in a contact if a properly licensed control operator is present at the control point, can supervise, and can stop the transmission. The station licensee stays responsible. International third-party traffic is only allowed with countries that have a third-party agreement with the US, or where the third party is eligible to hold an amateur license. Look up the current list before you offer to pass a message abroad. Also, third-party traffic can't be used to get around the business restrictions below.

Power (§97.313). The general ceiling is 1500 W PEP transmitter output, and you are also supposed to use the minimum power necessary for the communication. The limit applies to transmitter output, not to ERP, except in a few places such as the 60-meter channels, which have their own ERP-based limits. Some HF segments have lower limits, such as 200 W PEP on 30 meters and on the HF privileges that Technicians have. A few areas also have lower limits on 70 cm because of other users in the band. Check the section for your band and license class.

Prohibited transmissions (§97.113). The main categories are: communications for pay or a business purpose on your own behalf or your employer's, with narrow exceptions such as a teacher in class and occasional sale of your own station gear; music; messages encoded to obscure their meaning; obscene or indecent language; false or deceptive signals; and broadcasting. Plain abbreviations and Q-signals are not encryption. Encryption is a different matter, and the main exceptions are control of space stations and model craft. Digital modes also need publicly documented protocols under §97.309, so you can't use a private code and call it a data mode. Emergency communications involving immediate safety of life or protection of property have their own provisions in §97.403.

  • Administrators

I'll cover the rest, starting with RF safety.

RF exposure (§97.13(c) and the FCC's general exposure rules). Every station licensee is responsible for exposure limits, including exposure of family members, neighbors and anyone near the antenna. Stations whose power at the antenna exceeds the thresholds in the rule table must do a routine evaluation. The thresholds vary by band and are lower on bands like 10 m, 6 m and 2 m, so check the current table. The evaluation can use calculations, measurements, or both. The FCC's OET Bulletin 65 and its amateur supplement describe the methods, and many online calculators follow them. Mode and duty cycle matter because limits are averaged over time, and the averaging time differs for controlled and uncontrolled environments. Antenna height and location matter too. A dipole high in the air and a vertical next to a patio don't present the same exposure. Keep your inputs and results in case you need to show your work.

Spurious emissions (§97.307). Spurs must not cause harmful interference, and the rule sets attenuation levels. Below 30 MHz it is at least 43 dB below the mean power of the fundamental for most transmitters, with a lesser figure for very low power. From 30 to 225 MHz the requirement is stricter for higher-power stations, with 60 dB for transmitters above 25 W. Amplifiers get extra attention. External RF amplifiers that operate below 144 MHz fall under the equipment rules in §97.315 and §97.317, and the details are worth reading before you buy surplus or build your own. Overdriving a linear or running with too much ALC action causes splatter and spurs, and that is a compliance problem as well as a courtesy one.

License classes. The classes issued today are Technician, General and Amateur Extra. Novice and Advanced are no longer issued, but existing holders keep their privileges and can renew. Technicians get everything above 30 MHz plus limited HF segments. General has most of the HF bands, and Extra has all privileges. The class determines privileges by band and mode, so always check the band plan against the FCC table and not just the license name.

Control operator, automatic control and auxiliary stations. Every amateur transmission needs a control operator, and the licensee is presumed to be the control operator unless there is documentation otherwise. Local and remote control require the control operator at the control point. Automatic control is limited to specific station types such as repeaters, auxiliary stations, beacons and certain digital stations. Auxiliary stations (§97.201) are point-to-point links within a cooperating system, including repeater links. Cross-band links, remote bases, and control links all need a way for the control operator to shut the transmitter down. Remote operation over the internet is allowed, but the control operator's license class and the station's location set the privileges and limits, and the station must meet the control requirements for remote operation. Repeaters also need to ID under §97.119.

Enforcement. The FCC Enforcement Bureau can issue warning letters, citations or notices of violation, and for serious or repeated problems, forfeitures or license action. Deliberate interference, unlicensed operation, and refusal to cooperate usually draw more attention than a missed ID. You must also make your station available for inspection on request (§97.103). Volunteer monitoring programs like ARRL's can document and report problems, but they don't replace FCC enforcement.

License term and renewal. Licenses run 10 years. You can file for renewal in the 90 days before expiration, and if it lapses there is a two-year grace period in which you can still renew without retaking an exam. You cannot transmit during the grace period. After it ends you need a new license. Keep your mailing address and email address current in ULS, as §97.23 requires, since that is how the FCC contacts you. The FCC has charged an application fee for most amateur filings since 2022, so check the current amount at filing.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.