QSL workflow: what do you use for LoTW, eQSL, Club Log OQRS, bureau and direct cards, and when does each one make sense?
- Replies 2
- Views 34
- Created
- Last Reply
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Confirming contacts has split into several systems that don't all do the same job. Some stations upload to everything and print nothing. Others only deal in paper. This thread is for comparing workflows and sorting out which method suits which goal, whether that's DXCC credit, a nice wall of cards, or just closing the loop on a good QSO.
Here is how the main options differ, so we start from the same page.
LoTW (Logbook of The World). This is ARRL's system. You install TQSL, request a callsign certificate, and wait for ARRL's identity verification. The steps differ depending on where you are licensed, so follow the current ARRL instructions. You then sign your log files with the certificate and upload them. A confirmation happens only when the other station has also uploaded a matching QSO: same band, same mode group, and a time within the allowed window. LoTW confirmations count toward DXCC and other ARRL awards. Back up your certificate file (.p12) and remember the password. If you operate from a different DXCC entity or use a special callsign, you will probably need a separate station location or certificate in TQSL.
eQSL and QRZ logbook. Both are convenient and free to start. You upload your log and see matches when the other station has done the same. They are good for quick feedback and for people who like seeing a confirmed count. Neither counts for DXCC credit, so many operators use them as extras rather than the main record.
Club Log and OQRS. Club Log is a log-matching and statistics service. Many DXpeditions and DX stations also use its Online QSL Request System. Instead of mailing a blind request, you check that you are in the log and submit a request, usually choosing bureau or direct. The operator or manager then prints and mails the card. The request itself is not a confirmation. What counts is the card you eventually receive, or a LoTW match if the station also uploads there.
Bureau cards. Cards go in bulk through national radio society QSL bureaus. This is cheap but slow. Waits of many months are common, and sometimes much longer, because cards are batched and sorted by volunteers. It works well if you aren't in a hurry and the other station actually sends via the bureau.
Direct cards. You mail your card straight to the station or its QSL manager. Include a self-addressed envelope and enough return postage. For overseas stations that traditionally means US dollar bills ("green stamps") for return postage. International Reply Coupons are largely obsolete, and postage rates change, so check the operator's QSL info on their QRZ page or Club Log page before you send anything. Many people use a plain envelope without callsign or radio markings on the outside, because mail in some countries is less likely to arrive if it looks like it might contain money.
A note on card design. Bureau cards are generally around 9 x 14 cm (about 3.5 x 5.5 in), and sticking to that size avoids handling problems. The essentials are your callsign, the other station's callsign, date and time in UTC, band or frequency, mode, signal report, and a clear indication of whether you are confirming a two-way contact. Grid square, CQ and ITU zone, and QSL route are useful extras. A photo on the front and the log data on the back leaves room for a stamp or note.
Which of these are you actually using, and what has been working or not working for confirmation timelines? Is anyone still printing cards for everything, or only for rare ones and special event callsigns?
Link to comment
https://www.hamradiobase.com/forums/topic/10864-qsl-workflow-what-do-you-use-for-lotw-eqsl-club-log-oqrs-bureau-and-direct-cards-and-when-does-each-one-make-sense/Share on other sites