APRS end to end: handheld beacons, Mic-E, digipeaters, a Direwolf iGate and what shows up on aprs.fi
- Replies 2
- Views 35
- Created
- Last Reply
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
I'd like to put the APRS chain in one place, because most problems ("my beacon isn't on aprs.fi", "my messages never get acked", "the channel is clogged") come down to one link in it. Corrections and additions are welcome.
The basic chain. APRS is not a separate mode. It is AX.25 unnumbered information (UI) frames, 1200 baud AFSK (Bell 202) on VHF FM, sent without connection or acknowledgement at the packet level. In North America the shared frequency is 144.390 MHz. Other regions use different frequencies: 144.800 MHz across Europe and Africa, and different ones in Japan, Australia and elsewhere. Check your local band plan before programming anything. A station transmits a position, object, message or weather packet. A digipeater may repeat it according to the path in the header. An iGate that hears it on RF may pass it to the APRS-IS network over the internet, and sites like aprs.fi read from APRS-IS. So "I'm on aprs.fi" really means that someone's iGate heard you and had a working internet connection. It says nothing about whether your radio is configured well.
Paths. For mobile and handheld use, WIDE1-1,WIDE2-1 is the usual starting point. WIDE1-1 lets fill-in digipeaters pick you up, and WIDE2-1 gives one more hop through a wide-area digipeater. Long paths such as WIDE2-2 or WIDE3-3 multiply your airtime in busy areas and are rarely needed. Fixed stations with good coverage can often use a single hop or no digipeating at all. Avoid old-style RELAY and TRACEn-N paths unless local operators have specifically asked for them.
Mic-E. Many Kenwood and Yaesu handhelds and mobiles transmit positions in Mic-E format. It packs latitude into the destination address field of the AX.25 frame, and longitude, speed, course and symbol into the information field. That is why a Mic-E packet's "to" call looks like random characters instead of something like APxxxx. It's compact, which is good for a shared channel. If a tool appears to show garbage for the destination, it's probably decoding correctly and Mic-E is doing its job.
Radios. The Kenwood TH-D74 and TH-D75 and the Yaesu FT5D all have built-in GPS and APRS functions, so you can beacon without a separate TNC. The D74 and D75 can also work as a KISS TNC to a computer or phone over USB or Bluetooth, which is handy if you want an external mapping or messaging app. Menu names and available options differ between models and firmware, so check the manual for your radio's beacon type (manual, auto, PTT, SmartBeaconing), packet path, comment and status text, and callsign-SSID.
SmartBeaconing. Beaconing every 30 seconds while parked is wasteful, and every 10 minutes at highway speed leaves a trail of long straight lines. SmartBeaconing varies the rate with speed: slow speed means a long interval, high speed means a short one. It also adds extra beacons when your heading changes (corner pegging). The usual parameters are slow speed and rate, fast speed and rate, minimum turn angle, turn slope and minimum time between turn beacons. Settings that suit a car on a highway are usually poor for walking or cycling, so adjust them for how you travel.
Direwolf as iGate or digipeater. Direwolf is a software TNC that uses a sound card to decode and generate AFSK. It can also run as a digipeater, an iGate, a KISS or AGWPE server, and a beacon source. A minimal iGate configuration is built from lines like these, with your own callsign, passcode, audio device, PTT method and coordinates:
Those are placeholders, not a working config. Use the example configuration shipped with Direwolf for the exact syntax. Start receive-only, confirm your audio level is sane (the decoder reports levels), and only then consider transmitting, whether digipeating or gating internet-to-RF. A passcode lets you log in to APRS-IS, but it does not give you permission to transmit. That still requires an amateur licence and legal operation on your frequency.
Messaging, objects, weather. A message packet has the addressee padded to nine characters, then the text (limited to 67 characters) and an optional message number such as {123. The receiving station replies with an ack carrying that number, and the sender retries until it sees one. Objects (data type ;) let one station place a named item on the map, such as an event, a repeater or a net control point. Each carries a nine-character name and is marked live or killed. Sending objects at a modest rate and killing them when done keeps the map clean. Weather stations send temperature, wind, rain and pressure in a fixed compact format, usually every 5 to 10 minutes at most, with the weather symbol.
Questions to get things going: what's your usual path in your area, and what do you do about duplicate or junk packets from poorly configured digipeaters?
Link to comment
https://www.hamradiobase.com/forums/topic/10869-aprs-end-to-end-handheld-beacons-mic-e-digipeaters-a-direwolf-igate-and-what-shows-up-on-aprsfi/Share on other sites