Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

POTA activation checklist: park references, 10 QSOs, spotting, logging and two-fers

ci_cover.jpg

This thread is a working checklist for Parks on the Air, for people planning a first activation and for hunters who want to understand what happens on the other side of the pileup. Please correct anything that has changed. Program rules get updated, and the official POTA site and your park's own page always win over a forum post.

Park references: every park or entity has a reference made of a prefix and a number. You'll see the older K-0001 style in conversation and old logs, and the current site may show the same idea with a US- prefix. Look up the exact reference on the park's page before you leave, because many parks have similar names and some large areas have several references. Write the reference on your operating sheet so you don't have to guess when you're calling CQ.

Activator vs. hunter: the activator is the station set up in the park. A hunter is anyone who works that activator, from home, a car, or another park. An activation generally needs 10 valid QSOs within a single UTC day to count. Watch the UTC rollover. If you start at 2300 UTC and carry on past 0000, those QSOs fall on two different activation days. Check the current rules on how repeat contacts with the same station on different bands or modes are treated, because that is a common source of confusion.

Spots: spotting is how most hunters find you. You can self-spot through the POTA website or app when logged in. On CW and some digital modes, automated spotting through skimmer networks may help, but don't rely on it. Spot with your actual frequency and mode, and re-spot if you move. A short CQ POTA call with your call sign and park reference, repeated clearly, works much better than a long, rambling CQ.

Antennas and power: POTA has no power minimum, and many activators run QRP to 100 W on simple portable antennas. Typical choices are an end-fed half-wave, a linked or trap dipole on a mast, or a vertical with a few radials. Keep the setup away from walkways and vehicle areas, and don't damage trees or vegetation. Park rules differ on stakes, throwing lines into trees, drones, fires, and where you can park or set up. Check the land manager's rules, not only POTA's.

Logging: hunters generally get credit through the activator's uploaded log, so the activator needs to log accurately, especially the hunter's call sign. Many activators log in a program that exports ADIF, then upload the log to the POTA site. Park-to-park contacts need the other station's park reference recorded. Hunters can keep their own log too, but the official hunter credit follows from the activator's submission.

Roving and two-fers: a rove means activating more than one park in a day, and each park needs its own 10 QSOs. A two-fer, or three-fer, is a spot where one location sits inside more than one park reference, such as a state park overlapping a national trail. In that case, the QSOs are logged for each reference and the activation can count toward each park, if the rules for that overlap are met. Confirm the references ahead of time and announce all of them so hunters can claim each one.

Awards: POTA offers recognition levels for both activators and hunters, and some are tied to number of parks, number of QSOs, or special events. Award structures change, so look at the current award pages rather than trusting an old list.

Questions to get discussion going: What are your best methods for getting through the first few QSOs when you're not spotted yet? Do you prefer SSB, CW, or FT8 for your 10 contacts? And if you run a rove, how do you organize logs so each park's file stays clean?

  • Replies 2
  • Views 146
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On the first few QSOs: spot early, but only after you have actually found a clear frequency. Listen for a minute or two first, ask "is the frequency in use?", and only then call CQ POTA. If you spot first and then discover a net or a contest on top of you, you've sent hunters to the wrong place. Remember too that a spot is a tool for hunters, not a replacement for a good CQ.

For cleaner logs while roving, many operators keep one file per park per UTC day instead of one big file for the whole trip. That avoids mixing up references at upload time. If a spot has a two-fer, log the same QSO with each park reference in the way the upload tool expects, rather than editing the file by hand afterwards. A quick check of the ADIF before upload is worth it for catching a typo in a call sign or a missing park field.

  • Moderators

For modes: CW and digital are often efficient with low power, and SSB tends to give more casual hunters a chance to call. If your signal is modest, a mode you're comfortable with beats a mode that looks theoretically better. Bring a backup, like a second antenna, spare coax, or a simple dipole, since a connector or feedline fault can end an activation faster than propagation does.

For hunters, remember that a short exchange is fine. Give your call sign, the activator confirms it, and you're done. Don't hold up the line with a long chat while others are waiting. If you want credit for park-to-park, make sure you are clearly signing from your own park and giving the reference, and that the other station has copied it correctly. And if the activator is only a few QSOs short of the 10, a quick, clean call can help more than another long conversation.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.