Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

SOTA basics for new activators and chasers: summit refs, points, kits and staying safe

ci_cover.jpg

This thread is a starting point for anyone curious about Summits on the Air, whether you want to carry a radio up a hill or work the people who do. Please add corrections and regional details, because rules and practice vary between associations.

Start with summit references. A reference like W7W/KG-001 has three parts: the association (W7W), a region code within it (KG), and the summit number (001). Every listed summit has its own reference, and you need it for alerts, spots and logs. The SOTA database and its maps are the place to confirm the reference, height, points value and activation zone for the summit you have in mind. Look up the summit before you go instead of trusting a name from a trail sign or an old list.

An activator operates from inside the activation zone, which is a limited vertical distance below the summit. The usual target is four contacts, which qualifies the summit for points. Each summit has a points value based on its height. Activators can also earn bonus points in some winter conditions. Chasers are the stations at home, in a car or on another hill who work the activator. They earn chaser points, but not activator bonuses. Read the current General Rules and your association's rules for the exact definitions, because details like seasons and how often a summit can be claimed are easy to get wrong from memory.

The long-term awards are the Mountain Goat, for building up 1,000 activator points, and the Shack Sloth, for 1,000 chaser points. Both take a long time, so most people set smaller goals first: a first activation, a first chase, or a summit-to-summit contact.

For finding each other, SOTAwatch is the main hub. Activators post an alert with the planned summit, date, time window and likely bands or modes. During the activation they post spots, or have a friend do it, with the frequency and mode. Chasers watch the spot list and call in. Treat alerts as plans, not promises. Weather, trail conditions or running late can change everything, and a short spot update when plans change helps everyone.

On the radio side, a SOTA station can be very small. Many activators use a QRP HF rig, a compact battery, a light end-fed or dipole antenna, and a telescopic pole. Others go VHF-only with a handheld and a small directional antenna, relying on 2 m FM or SSB depending on local activity. VHF is light and simple, and it can work well in areas with enough chasers. HF gives longer reach and more reliable spots in sparsely populated places. The best kit is the one you will carry, set up quickly in wind and cold, and operate without fumbling. Practice at a park or in the backyard first.

Logging is where many beginners stumble. At minimum, record the date and time in UTC, callsign, band or frequency, mode, signal reports and the summit reference. Activators should also log the chaser's callsign accurately and note any summit-to-summit contact with that station's reference. Paper and a pencil work fine in cold or wet weather. Enter the log into your preferred software afterwards and upload it to the SOTA database in the format it accepts. Chasers should keep the activator's summit reference with each contact, since it is needed for chaser credit.

Safety comes before points. Check the forecast and turn-around time, tell someone your route, carry water, food, layers, a light, navigation and a first-aid kit, and be ready to abandon the activation if lightning or storms build. A tall antenna pole on an exposed summit is a bad place to be during a thunderstorm. Also confirm access rules, permits, license privileges and local restrictions for the area.

What would you tell a newcomer about choosing a first summit, planning the radio kit, or getting chasers to hear a first spot?

  • Replies 2
  • Views 104
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first summit, I would pick one with an easy trail, a clear activation zone and decent phone or spotting options, even if the points value is low. The point of the first outing is to learn the workflow, not to stack points. Print or save the summit information offline, because the mountain may have no signal. Note the reference, the approximate activation zone, your turn-around time and a backup operating spot.

On the radio side, a simple band plan helps a lot. Decide in advance which band you will try first and what you will do if it is quiet. If you are using HF, 40 m and 20 m are common starting points because they cover a lot of distance and activity. If you are VHF-only, say so in the alert so chasers know what to expect. And do not wait until you are cold and tired to figure out how the spot gets posted.

  • Administrators

As a chaser, a few habits make life easier for activators. Listen first, make sure you have the callsign and frequency right, and send a short, clean call. Do not stack on top of a weak station. Give the report, confirm the summit reference when needed, and keep the exchange brief so the activator can reach four contacts and keep the pileup moving.

It also helps to keep your own log organized by summit reference and date. If you want chaser credit, a messy log is a pain to sort out later. And if you hear a station you cannot work, a spot can still be useful, but only when you are sure of the callsign and frequency. Bad information on SOTAwatch wastes everyone's time.

For activators building a lightweight kit, I would add one thing to the packing list: a short written checklist. It is easy to forget a coax adapter, a key, spare batteries or the pencil when you pack at home. A small list taped inside the radio bag solves that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.