Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Getting past the 15–20 WPM plateau: keyer settings, filters, and copy habits that matter

ci_cover.jpg

A lot of CW operators hit a wall somewhere around 15 to 20 WPM. Sending feels fine, but copying falls apart in a pileup, or you can copy but sending gets sloppy once you push the speed. This thread is for comparing what actually helps, so let's start with the main variables and see where people disagree.

Receiving. The usual advice is to learn characters at their real speed, not as dit-dah counting exercises. That is the idea behind both Koch-style trainers and Farnsworth timing. With Farnsworth, characters are sent at a faster speed (say 20 WPM) but the gaps between characters and words are stretched, so the overall rate is lower. The catch is that if you rely on long gaps forever, you can end up struggling when the spacing tightens on the air. Koch-style training starts at full character speed with just a couple of characters and adds more as you reach a high accuracy threshold. Which have you found works better for moving from copying on paper to copying in your head?

Sending. Iambic keying with paddles is the most common setup today. Mode A and Mode B differ in what happens when you release a squeeze: in Mode B, the keyer sends one extra opposite element after release, while Mode A stops when the paddles open. Neither is right for everyone, but if your characters like C, F, or Q keep coming out with an extra dit or dah, check your mode and your timing before blaming your fist. Weight and spacing matter as much as speed. Cramped letter spacing makes code hard to read even when it is technically correct.

Hardware. Straight keys, bugs, and paddles all have fans. A Vibroplex-style bug is semi-automatic: the pendulum makes the dits and you send the dahs by hand, so you can't squeeze-key it the way you can with an iambic setup. Paddle makers such as N3ZN come up often when people want adjustable tension and travel in a durable key, but feel is personal, and it is worth checking current specs and reviews before you buy. Whatever you use, a smooth contact gap and a stable base are worth more than a brand name.

Receiver side. A CW filter in the 400 to 500 Hz range is a reasonable all-round choice. Go narrower, around 250 Hz or less, when it's crowded, but very narrow filters can ring and make tuning around harder. Set your sidetone and receive pitch so that a signal at the pitch you like is centered in the filter. If you use QSK (full break-in), you hear between your own elements, which makes it much easier to notice when someone calls over you. It does require fast, quiet transmit/receive switching, and it can be hard on an amplifier setup that isn't designed for it.

Software. CW Skimmer and similar decoders are useful for spotting callsigns and for watching a band, but decoding is much less reliable than a trained ear when signals are weak, fading, or sent with uneven timing. In contests, remember that using skimmer-fed spots usually puts you in an assisted category, so check the rules for the specific event.

Questions for the thread: what is your practice routine for copying in your head? Do you prefer paddles in Mode A or B, and why? And how do you handle abbreviations and prosigns such as AR, SK, KN, and BT when you're on the air at speed?

  • Replies 2
  • Views 54
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

On the head-copy question, one thing that helps many people is to stop writing every letter. Write down only callsigns, names, and numbers, and let the rest go by. When you copy letter by letter you tend to lag behind, and that lag is often what causes you to lose the next character. Start with practice that has predictable structure, like a CQ followed by a callsign, an RST, and a name, because your brain begins to anticipate the format.

For contests, cut numbers also trip people up. In a lot of CW contests 5NN means 599, with T commonly standing for zero and N for nine. Learn them as sounds, not as a lookup table. Weekly short-format events, such as the CWops mini-tests, can be a low-pressure way to practice exchanges at speed, but check the current exchange rules before each one.

  • Moderators

On Mode A versus Mode B: it often comes down to what you learned on. If you're having trouble, the fix is rarely a change of mode alone. Slow the keyer down a few WPM and watch your squeeze timing. Many operators release the squeeze a hair too early or too late, which shows up as an extra element. Recording yourself and playing it back, or sending to a decoder, can reveal spacing problems that your ear misses while you're sending.

For prosigns, remember that they are sent as one character with no gap: AR (·−·−·) ends a message, SK (···−·−) ends a contact, KN (−·−−·) means go ahead, only the station named, and BT (−···−) is a pause or separator. Send them as one smooth unit, not as two letters, or the other station may copy something different. I would keep abbreviations simple on the air too. TU, UR, PSE, and AGN are all widely understood, but a wall of Q-signals and clipped shorthand can make you harder to copy, especially for newer operators.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.