ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Planning a first SOTA activation: reference format, 4-QSO rule, kit choices, and logging
I'd like to collect practical advice for anyone planning a first Summits on the Air activation, or a first serious run at chasing. Here is the basic framework so we start from the same terms, and then some questions.
Summit references. A reference has three parts: association, region, and summit number. In W7W/KG-001, W7W is the association (Washington), KG is the region code, and 001 is the summit's number within that region. Always take the reference from the SOTA database, not from memory or a map label. Summits get added, renumbered or retired, and peaks with similar names are easy to mix up.
Activator and chaser. The activator climbs to the summit and operates from inside the activation zone, normally within a set vertical distance of the highest point (check the association rules for the exact figure). The chaser works from anywhere, home or portable, and contacts the activator. Activators need at least four QSOs to qualify the summit for points. Summit-to-summit (S2S) contacts count for both stations, which makes them popular.
Points and bonus. Each summit has a point value based on its height. Some associations and seasons add bonus points, such as winter bonuses. Bonus rules vary and change, so read the current General Rules and your association's rules before you plan around them. The two best-known milestones are the Mountain Goat for 1000 activator points and the Shack Sloth for 1000 chaser points.
Spotting and logging. Activators usually self-spot on SOTAwatch (or through a spotting app that feeds it) with the reference, frequency and mode. Chasers watch the spots and call. Logs go into your account on the SOTA database, usually via a CSV upload. Record times in UTC, and keep a paper backup in case the phone dies or is too cold to use.
Questions to start us off:
What is the lightest sensible kit for a first activation: a VHF handheld only, or a small QRP HF rig with a wire antenna?
How do you decide between 2 m FM and HF when you want to reach four contacts reliably?
What belongs on a turnaround-time and safety checklist, other than telling someone your route?
How do you keep the log tidy when you are cold, in a hurry, and chasing S2S contacts?
I'd like to collect practical advice for anyone planning a first Summits on the Air activation, or a first serious run at chasing. Here is the basic framework so we start from the same terms, and then some questions.
Summit references. A reference has three parts: association, region, and summit number. In W7W/KG-001, W7W is the association (Washington), KG is the region code, and 001 is the summit's number within that region. Always take the reference from the SOTA database, not from memory or a map label. Summits get added, renumbered or retired, and peaks with similar names are easy to mix up.
Activator and chaser. The activator climbs to the summit and operates from inside the activation zone, normally within a set vertical distance of the highest point (check the association rules for the exact figure). The chaser works from anywhere, home or portable, and contacts the activator. Activators need at least four QSOs to qualify the summit for points. Summit-to-summit (S2S) contacts count for both stations, which makes them popular.
Points and bonus. Each summit has a point value based on its height. Some associations and seasons add bonus points, such as winter bonuses. Bonus rules vary and change, so read the current General Rules and your association's rules before you plan around them. The two best-known milestones are the Mountain Goat for 1000 activator points and the Shack Sloth for 1000 chaser points.
Spotting and logging. Activators usually self-spot on SOTAwatch (or through a spotting app that feeds it) with the reference, frequency and mode. Chasers watch the spots and call. Logs go into your account on the SOTA database, usually via a CSV upload. Record times in UTC, and keep a paper backup in case the phone dies or is too cold to use.
Questions to start us off:
Link to comment
https://www.hamradiobase.com/forums/topic/11004-planning-a-first-sota-activation-reference-format-4-qso-rule-kit-choices-and-logging/Share on other sites