Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Studying for the Technician (Element 2) exam: how to use the question pool without just memorizing letters?

ci_cover.jpg

I'm putting together a study plan for the Technician license exam and want to check that I'm approaching it sensibly. As I understand it, Element 2 is 35 multiple-choice questions drawn from a public question pool, and you need 26 correct (about 74%) to pass. The pool is published ahead of time, so in theory you could memorize every answer. That feels like a bad way to learn, and it probably wouldn't help much on the air.

Here is what I'd like input on:

1. How should I split study time across the topic areas? The exam seems to cover FCC rules, operating procedures, radio wave behavior, basic electronics, station equipment, modulation, antennas, and safety.

2. What are the concepts people tend to trip on, such as Ohm's law, wavelength and frequency, repeater offsets, or RF exposure?

3. How should practice tests fit in? How many should I take, and what score means I'm ready?

4. What should I confirm before test day, such as which pool version is in use?

I'd rather understand why an answer is right than recognize its position on the page. Any study order, resources, or tips for tricky question types would be welcome.

  • Replies 2
  • Views 41
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start by confirming which question pool your exam session will use. Pools are replaced on a multi-year cycle, and a study guide written for an older pool can include material that isn't tested or miss new questions. The NCVEC publishes the pool, and the volunteer examiner team running your session can tell you which version they'll use. Check the edition on any book, app, or website you pick.

The exam is built from sections of the pool, with a set number of questions drawn from each. FCC rules get the largest share, so they deserve proportionally more time than their dry reputation suggests. Electrical principles, components, equipment, and modulation together make up a big block too. Antennas and safety have fewer questions each, but they're usually quick to learn, so they're good places to pick up points.

For the math, you rarely need more than a few relationships:

Ohm's law: E = I × R. With 12 volts across a 4 ohm resistor, the current is 3 amps.

Power: P = E × I. That same circuit dissipates 36 watts.

Wavelength in meters is roughly 300 divided by the frequency in MHz. A signal near 146 MHz is about 2 meters, which is where the band name "2 meters" comes from. Knowing this lets you work out many antenna-length and band-name questions instead of memorizing them.

You don't need calculus or complex algebra. Rearranging a formula and doing simple arithmetic is enough, and you can use a basic calculator if the VE team allows it, so ask beforehand.

  • Administrators

On using the pool without just memorizing letters, there's one trick. When you miss a practice question, don't only note the right answer. Read each wrong option and say why it's wrong. Distractors in this pool are often real facts that answer a different question. That turns one missed question into three or four facts, and it also stops you from learning answer positions, since many practice tools shuffle the order.

Some areas worth extra attention:

License terms: Technician licenses are issued for 10 years, and there's a grace period after expiration during which you can renew without retaking an exam. Know the difference between renewing and relicensing, and know the station identification rules. You identify at the end of a communication and at intervals during a long one.

Privileges: Technicians have all amateur privileges above 50 MHz, which covers 6 m, 2 m, 1.25 m, and 70 cm. There are also limited HF privileges. Learn exactly which segments and modes, because questions can be specific about them.

Repeaters: Understand input versus output frequency, the offset (commonly 600 kHz on 2 m, and 5 MHz on 70 cm), and CTCSS or PL tones for access. A repeater listens on one frequency and retransmits on another. Be able to explain what "offset" means and why a repeater won't respond if you're missing the tone. Know that you can use simplex when you can reach the other station directly and that doing so keeps the repeater free for others.

RF exposure and safety: Know that the FCC sets maximum permissible exposure limits and that the amount of exposure depends on power, frequency, antenna, and distance. Also know basic electrical safety: lightning protection, tower and antenna work away from power lines, and proper grounding.

For practice tests, take several full 35-question tests and track scores by section. Many people feel ready when they consistently score well above the passing mark rather than just at it, since test-day nerves and unfamiliar wording can cost a few points. Look at the weakest section, study it, and retest.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.