Getting from 5 to 20 WPM: what actually moves the needle, and how do you break a plateau?
- Replies 2
- Views 40
- Created
- Last Reply
Top Posters In This Topic
-
Admin_Lee 1 post
-
Mod_Chrissy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Reaching 5 WPM is mostly memorization. Reaching 20 WPM is a different skill. Somewhere in between, the job changes from decoding dits and dahs to recognizing sounds, then whole words, then phrases. That change is why many people stall. This thread is for comparing methods, so here is a framework to argue with.
Learn at real character speed. The usual advice is to send characters at 18-20 WPM and stretch out the spacing between them (Farnsworth timing) rather than slowing everything down. If you learn the letters at 5 WPM, you tend to count elements, and that habit has to be unlearned later. Koch-method trainers add characters one at a time at full speed. Many people run them until they hit about 90% copy on the current set before adding the next character. LCWO, G4FON's Koch trainer and similar tools all work this way.
Expect plateaus in two places. The first is often around 10-13 WPM. Characters are solid, but you are still translating each one into a letter, and the next one arrives before you finish. The second tends to show up in the mid-teens. Pencil copy becomes the bottleneck, and you need to start copying in your head. The fixes differ. For the first plateau, shrink the extra spacing and drill the characters you still hesitate on. For the second, stop writing every letter, write only numbers and callsigns, and then try to write nothing.
Head copy is a practice mode, not a talent. Start with short, predictable material such as common words, then QSO phrases like "UR RST 579" and "NAME IS". Your brain will begin to hear them as units. Callsign drills (RufzXP is a popular one) build the habit of holding a string in memory while the next one comes in. The same goes for contest exchanges, which are short and repetitive. You can run Morse Runner as a pileup simulator long before you are ready for the real thing.
Paddles and keyer settings matter more than people expect. Poor sending and poor copying feed each other. If you use iambic paddles, you will choose between Mode A and Mode B. Mode B adds one extra element when you release both paddles, and it is worth trying both to see which matches your squeeze timing. Keep the weight near default at first, around a 3:1 dash-to-dot ratio, since odd weighting makes your own sending hard to judge. Set the sidetone to a pitch you can listen to for an hour, commonly somewhere in the 500-700 Hz range. Set paddle tension and contact gap light enough to avoid fatigue but firm enough to avoid accidental double dits.
Schedule: short and often beats long and rare. One workable pattern is 20-30 minutes a day, split into a few blocks. For example, spend 10 minutes on new or weak characters, 10 on words or callsigns slightly above your comfort speed, and 10 on real or simulated QSO copy. Then add one longer session a week. Push the speed up in small steps. Work at a speed where you copy about 90% and your errors are clustered rather than random. Dropping back a notch when you get tired is fine.
Real on-air practice. Sooner or later you need live signals with QSB, noise and different fists. Slow CW nets, club code practice sessions and the short weekly contest-style sessions some CW groups run are good low-pressure starting points. Check the current schedules with your local club or the sponsoring group, since they change. For speed contests, one approach is to listen first and just copy callsigns and exchanges without making any QSOs. When that feels comfortable, begin answering.
Decoding by ear versus software. A decoder can be a useful check. It lets you compare what you thought you heard against a transcript, and it can show you which characters you consistently miss. But it struggles with fading, noise, bad timing and irregular spacing, which describes plenty of real-world CW. If you lean on it too early, you may never build the ability to copy in your head. A reasonable compromise is to do your practice by ear and use software only for review afterward.
Questions to get things going: Where did your own progress stall, and what got you through it? Do you prefer Koch with Farnsworth spacing or a fixed overall speed? Straight key, bug, or paddles for building a good fist? What would you tell someone at 8 WPM who wants to get on the air this month?
Link to comment
https://www.hamradiobase.com/forums/topic/11026-getting-from-5-to-20-wpm-what-actually-moves-the-needle-and-how-do-you-break-a-plateau/Share on other sites