Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Prepping for the Amateur Extra (Element 4): which advanced theory topics deserve the most study time?

ci_cover.jpg

I'm planning to sit for Element 4 and could use advice on how to split my study time. The exam is 50 multiple-choice questions, and as I understand it you need 37 correct to pass. The pool is public, so memorizing answers is possible, but I'd like to understand the material well enough to handle the calculation questions and the ones where the wording is changed slightly.

The topics I'm sorting through are:

1. Semiconductors and op amps: transistor biasing, gain formulas, gain-bandwidth product, slew rate.
2. Filters and oscillators: Butterworth vs. Chebyshev, Colpitts vs. Hartley vs. Pierce, and what makes an oscillator sustain.
3. Modulation and receiver/transmitter design: modulation index, deviation, mixers, dynamic range, phase noise.
4. Antenna theory and transmission lines: dBi vs. dBd, radiation resistance, and Smith chart questions.
5. FCC Part 97: definitions, station control, and what the Extra class actually adds in privileges.

Which of these tend to cause the most trouble, and is there a good way to study them besides rote memorization? Also, what do Extra privileges amount to in practice? I know it means full band access, but I'd like to be precise about it before I tell anyone what I'm studying for.

  • Replies 2
  • Views 69
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start with the topics where a small number of ideas unlock a lot of questions. Op amps are a good example. Know that an inverting amplifier has gain of minus Rf over Rin, and a non-inverting amplifier has gain of 1 plus Rf over Rin. Then learn the gain-bandwidth product: for a typical voltage-feedback op amp, closed-loop gain times usable bandwidth is roughly constant. If the GBW is 1 MHz and you set the gain to 10, expect about 100 kHz of bandwidth. Slew rate is a separate limit and mostly matters for large signals at higher frequencies.

For oscillators, don't just memorize names. Colpitts uses a capacitive divider in the feedback network, Hartley uses a tapped inductor (or two inductors), and Pierce is the crystal-controlled one. Underneath all of them is the same idea: loop gain has to be at least 1, and the feedback has to come back in phase. A question that seems to be about a specific circuit is often just asking whether you can identify that structure.

Filters work the same way. Butterworth is maximally flat in the passband, Chebyshev trades passband ripple for a steeper cutoff, and elliptic filters get steeper still by allowing ripple in both the passband and stopband. If you know the tradeoff, you can reason out most of the answer choices.

For the Smith chart, learn five facts. The center is the matched point (normalized impedance of 1 + j0). The upper half is inductive reactance and the lower half is capacitive. Moving toward the generator is clockwise. One full trip around the chart is a half wavelength of line. Circles centered on the chart's center represent constant SWR. Most of the pool questions only need that, plus reading r and x values off the chart.

Calculators are generally allowed at exam sessions, but it's worth asking the volunteer examiner team beforehand what their policy is, such as whether memory must be cleared or whether programmable models are restricted.

  • Moderators

On privileges: an Amateur Extra can operate on all frequencies allocated to the Amateur Radio Service, in all authorized modes, within the power limits and other rules in Part 97. Segments that used to be reserved for Advanced and Extra are now effectively Extra-only for new licensees, and some sub-band edges that look odd on a band chart are just the dividing lines between license classes. Don't rely on a memorized chart. The authoritative sources are §97.301 through §97.305 for frequency and mode allocations, along with the ARRL or other current band charts for a quick visual.

Extra also opens up some operating options beyond the band edges. You can request a Group A call sign, including the shorter formats (such as 1x2 and 2x1) that are reserved for the top class. You can also serve as a volunteer examiner for any exam element, which is a way to give back once you pass.

For Part 97 study in general, use the section numbers as anchors. §97.3 is the definitions section, and many questions are just vocabulary from it. Station identification, third-party communications, prohibited transmissions, and control-operator rules each have their own sections, and the exam likes to test the exceptions to the general rule.

On the design-theory side, a few receiver concepts show up repeatedly and are worth working through with real numbers: sensitivity vs. dynamic range, why strong nearby signals cause blocking or intermodulation, and why phase noise in a local oscillator limits close-in selectivity. For modulation, remember that FM modulation index equals frequency deviation divided by the modulating frequency. Also check which pool revision is currently in use, because the question pool is updated on a multi-year cycle and older study guides may have outdated questions.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.