ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Building a QSL workflow: LoTW first, then Club Log OQRS, bureau and direct cards for the rest?
This is for anyone trying to sort out which confirmation method is worth the effort. There are a lot of options now: Logbook of The World, eQSL, QRZ logbook, Club Log OQRS, the bureau, direct cards with an SASE or green stamps, and the old paper-card-in-the-mailbox route. They do not all do the same job, and the biggest difference is whether a confirmation counts for DXCC credit.
Here is a rough way to think about it, with corrections welcome.
LoTW is the one most people set up first because ARRL accepts it for DXCC. You install tQSL, request a callsign certificate, and complete the verification step ARRL requires. You then create a station location with the correct DXCC entity, grid square, CQ zone and ITU zone, sign your ADIF log, and upload it. A QSO only becomes a confirmation when the other station uploads a matching record, so the timing depends on them. Matching is on callsign, band, mode group and time, with a tolerance of about 30 minutes. A badly set computer clock or the wrong station location can quietly cost you matches.
eQSL and the QRZ logbook are convenient and good for casual confirmations, but eQSL is not accepted for DXCC. If you are chasing an award, check the sponsor's current rules before you count those confirmations toward it. Paper cards and LoTW are the usual routes for ARRL's DXCC.
Club Log's OQRS (Online QSL Request Service) sits between the digital and paper worlds. If a station or DXpedition uses it, you can look up your QSO in their uploaded log and request a card, usually by bureau or direct. Direct requests normally involve a payment or return postage. The OQRS page tells you what that operator wants, so read it before you pay.
For the paper side, the bureau is cheap but slow, and it can take months or years depending on the countries involved. Direct cards are faster but cost postage in both directions. When people write "green stamps," they mean US dollar bills. The amount that makes sense depends on the destination and on current postage, so check the QSL information for that station rather than relying on an old rule of thumb.
Questions to get the discussion going:
1. For someone starting from zero, is LoTW plus a Club Log upload the best baseline, with paper only for the entities that do not use LoTW?
2. How do you decide when a direct card is worth the postage compared with waiting on the bureau?
3. What belongs on a card that people overlook? Mine so far: both callsigns, UTC date and time, band or frequency, mode, RS(T), grid, QSL route, and a clear spot for the other operator's stamp or note.
4. How do you keep the certificate, backup file and station locations organized so a computer change does not turn into a mess?
This is for anyone trying to sort out which confirmation method is worth the effort. There are a lot of options now: Logbook of The World, eQSL, QRZ logbook, Club Log OQRS, the bureau, direct cards with an SASE or green stamps, and the old paper-card-in-the-mailbox route. They do not all do the same job, and the biggest difference is whether a confirmation counts for DXCC credit.
Here is a rough way to think about it, with corrections welcome.
LoTW is the one most people set up first because ARRL accepts it for DXCC. You install tQSL, request a callsign certificate, and complete the verification step ARRL requires. You then create a station location with the correct DXCC entity, grid square, CQ zone and ITU zone, sign your ADIF log, and upload it. A QSO only becomes a confirmation when the other station uploads a matching record, so the timing depends on them. Matching is on callsign, band, mode group and time, with a tolerance of about 30 minutes. A badly set computer clock or the wrong station location can quietly cost you matches.
eQSL and the QRZ logbook are convenient and good for casual confirmations, but eQSL is not accepted for DXCC. If you are chasing an award, check the sponsor's current rules before you count those confirmations toward it. Paper cards and LoTW are the usual routes for ARRL's DXCC.
Club Log's OQRS (Online QSL Request Service) sits between the digital and paper worlds. If a station or DXpedition uses it, you can look up your QSO in their uploaded log and request a card, usually by bureau or direct. Direct requests normally involve a payment or return postage. The OQRS page tells you what that operator wants, so read it before you pay.
For the paper side, the bureau is cheap but slow, and it can take months or years depending on the countries involved. Direct cards are faster but cost postage in both directions. When people write "green stamps," they mean US dollar bills. The amount that makes sense depends on the destination and on current postage, so check the QSL information for that station rather than relying on an old rule of thumb.
Questions to get the discussion going:
1. For someone starting from zero, is LoTW plus a Club Log upload the best baseline, with paper only for the entities that do not use LoTW?
2. How do you decide when a direct card is worth the postage compared with waiting on the bureau?
3. What belongs on a card that people overlook? Mine so far: both callsigns, UTC date and time, band or frequency, mode, RS(T), grid, QSL route, and a clear spot for the other operator's stamp or note.
4. How do you keep the certificate, backup file and station locations organized so a computer change does not turn into a mess?
Link to comment
https://www.hamradiobase.com/forums/topic/11035-building-a-qsl-workflow-lotw-first-then-club-log-oqrs-bureau-and-direct-cards-for-the-rest/Share on other sites