Building a remote station: IC-7610/RS-BA1 vs SCU-LAN10 vs Flex vs RigPi, and how to handle latency, security and the rules
- Replies 2
- Views 36
- Created
- Last Reply
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
I'd like to compare approaches to remote station control. Mixing receive-only tools like WebSDR and KiwiSDR with full transmit-capable remote bases tends to blur some important differences, so here is how I'd split the field.
WebSDR and KiwiSDR are receive-only. A WebSDR (the Twente-style software) and a KiwiSDR (a 0-30 MHz SDR cape with a browser interface) let you listen from a distance, check propagation, or use someone else's quiet receive site. They are useful for checking whether your signal is being heard, but they do not involve remote transmitter control, so licensing and control-operator issues mostly don't apply.
Then there are the transmit-capable options. Icom's IC-7610 has a network connection and works with Icom's RS-BA1 software for remote control and audio. Yaesu's SCU-LAN10 is a network interface for certain Yaesu radios, so check Yaesu's current compatibility list for your model. FlexRadio is a different architecture. The radio is already a network device, and SmartSDR with SmartLink is built around remote use. RigPi is a Raspberry Pi-based station controller that talks to the rig through Hamlib-style control and can also manage things like rotators and switching. Services such as RemoteHams.com sit on the community side, listing or brokering access to remote stations. Check their current terms and supported setups before relying on them.
The questions I'd like to discuss are these. Where should the intelligence live: in the radio, in a small computer at the remote site, or in a vendor application? How much latency is acceptable for SSB, CW and digital modes? What is the minimum safe network design? And what does your licence actually require when you are not in the shack?
I'm interested in practical design notes more than brand loyalty. If you have a setup with a failure mode worth knowing about, such as a stuck PTT, a dropped VPN or a firmware surprise, please describe it in general terms.
Link to comment
https://www.hamradiobase.com/forums/topic/11068-building-a-remote-station-ic-7610rs-ba1-vs-scu-lan10-vs-flex-vs-rigpi-and-how-to-handle-latency-security-and-the-rules/Share on other sites