Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Dual-band mobile rigs: FTM-500D vs ID-5100A vs TM-D710G, plus how to wire and run them properly

ci_cover.jpg

This thread is for comparing the three dual-band mobiles that come up most often (Yaesu FTM-500D, Icom ID-5100A, Kenwood TM-D710G) and for the installation side that matters just as much as the radio. All three are roughly 50 W class on 2 meters and 70 centimeters, so the choice usually comes down to mode, features and how you operate.

Where they differ: The FTM-500D is a Yaesu System Fusion (C4FM) radio that also does analog FM, with an Automatic Mode Select function and WIRES-X support. The ID-5100A is Icom's D-STAR radio with a large touchscreen, dual receive and a built-in GPS receiver. The TM-D710G is analog FM only, but it has a built-in APRS TNC, a GPS interface and a long reputation for cross-band repeat and EchoLink-related features. If your local repeaters are mostly analog FM, the Kenwood is not at a disadvantage. If your area has an active Fusion or D-STAR network, choosing the matching digital radio makes more sense.

Cross-band repeat: This lets the radio receive on one band and retransmit on the other, for example so a handheld on 70 cm can reach through the mobile on 2 m. Do not assume every radio does it. Check the manual for the exact model and firmware before you buy for that purpose. Also remember that you are still responsible for identification and for operating within your license privileges, and that the mobile is effectively an unattended-style repeater while you are away from it, so check your local rules.

Install basics worth discussing: power wiring, fusing, antenna placement, noise, and where to put the radio so it is secure and not in an airbag deployment area. What setups have worked for you, and what would you change?

  • Replies 2
  • Views 64
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start with power, because most mobile problems trace back to it. Run the supplied fused power cable directly to the battery rather than tapping an accessory circuit or using a cigarette lighter socket. A 50 W radio can draw roughly 10 to 12 A at full transmit power, and the voltage drop on a thin or shared circuit shows up as a weak signal or random resets. Keep the fuse holder close to the battery terminal on the positive lead, since its job is to protect the wire. Use the fuse rating in the radio's manual, and do not replace a blown fuse with a bigger one just to stop it blowing.

Use a rubber grommet where the cable passes through the firewall so the insulation does not chafe. Route the cable away from sharp edges and hot parts, and crimp or solder connectors rather than twisting wires together. If you use a fused distribution block or a relay-switched feed, follow the radio manufacturer's guidance and keep the connections short and clean. Check your connections after a few weeks, because vibration finds loose terminals.

For mounting, use a bracket that bolts to something solid and keep the radio away from the airbag zone. A head unit on a remote cable needs to be positioned so you can operate it without looking away from the road for long. The Kenwood and Yaesu have detachable faceplates or control heads, so measure the available space before you commit to a location.

  • Administrators

On noise: first decide whether it is coming from the vehicle or from the radio's own wiring. Listen on a quiet frequency with the squelch open. Compare engine off, ignition on, and engine running at various speeds. Whine that rises with RPM points to the alternator or its wiring. Ticking points to ignition or injector noise. Hash that sounds like a hiss is often caused by LED lighting, DC-DC converters, USB chargers and dash cameras. Unplug accessories one at a time and see what changes. Ferrite chokes on power leads can help, but fixing the source is usually better than filtering around it.

The antenna matters more than the radio. A roof-mounted NMO antenna with a good ground plane gives better results than a trunk-lip mount with a poor ground. Use coax that suits the run length, since UHF loses more in cheap thin cable than VHF does. Check SWR on both bands, because a dual-band antenna can look fine on 2 m and poor on 70 cm if the mount is not bonded to the body.

Etiquette is mostly common sense. Driving comes first, so use a hands-free setup or pull over for anything that needs attention. Listen before transmitting, keep your calls short, and say your callsign clearly. On a busy repeater, you can say "mobile" in your call so others know you may have to pause. Do not hold a repeater for long conversations while you are fiddling with settings, and turn the volume to a reasonable level so a wide-open squelch tail is not disturbing everyone in the car.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.