Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Where do I actually operate? Band plan vs. FCC rules, band edges, and calling frequencies from 160 m to 33 cm

ci_cover.jpg

I'm trying to build a mental map of where things happen on the ham bands, from 160 meters up through 33 centimeters, and I keep mixing up what's a rule and what's a convention. A few specific questions:

1) What's the difference between the ARRL band plan and the FCC's Part 97 sub-bands, and which one can actually get me in trouble? 2) How do I handle band edges, especially with SSB, so I'm not transmitting out of my privileges? 3) How do license class privileges break down on HF versus VHF/UHF? 4) What's the deal with the 60 meter channels? 5) Which simplex calling frequencies are worth knowing on 6 m, 2 m, 70 cm and 33 cm? 6) How do international allocations differ if I travel or work DX?

Corrections welcome. I know some of this changes over time, so please say where I should double-check against current sources.

  • Replies 2
  • Views 39
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start with the split between rules and conventions. Part 97 is the law: which frequencies each license class may use, which emission types are allowed in which segments, and the power limits. The ARRL band plan is a voluntary set of recommendations, a gentlemen's agreement that keeps weak-signal CW, SSB, digital and FM from stepping on each other. Breaking Part 97 is a violation. Ignoring the band plan will mostly make you unpopular, though on a crowded band that can matter a lot.

For HF privileges, the rough picture for General and Extra is as follows. Check the current FCC chart for exact numbers, because the edges were revised in the past and you don't want to rely on an old table.

General has all of 160 m, and on 80 m it has CW/data from 3.525 to 3.600 and phone from 3.800 to 4.000. On 40 m the General CW/data segment is 7.025 to 7.125 and phone starts at 7.175. On 20 m phone starts at 14.225, on 15 m at 21.275, and 10 m phone runs from 28.300 up. Extra gets the full bands, with phone starting at 3.600 on 80 m, 7.125 on 40 m, 14.150 on 20 m and 21.200 on 15 m, plus the very bottom CW slices.

The WARC bands (30, 17 and 12 m) are a separate case. They're open to General and above, with no contesting by convention. 30 m is CW and data only and limited to 200 W PEP, while 17 and 12 m split into a CW/data portion and a phone portion.

Technicians have no phone on HF except SSB on 10 m (28.300 to 28.500). They also get CW-only slices of 80, 40 and 15 m and CW/data on the bottom of 10 m, with a 200 W PEP limit. From 6 m upward (50 MHz and up), Technicians have essentially the same operating privileges as the higher classes on most bands, which is why VHF/UHF is such a natural home for them.

On band edges: remember where your signal actually sits. In LSB the audio extends below the dial frequency, and in USB it extends above. If you're a General on 75 m and set an LSB dial to exactly 3.800, part of your signal is below 3.800 and outside your phone segment. Leave a few kHz of margin: for LSB, tune comfortably above the lower edge, and for USB, comfortably below the upper edge. For example, on 20 m, don't park a USB dial at 14.350 with a 2.8 kHz-wide signal. Rig readouts also drift and can be off a little, so the margin covers that too.

On 60 meters, operation is on discrete channels, not a continuous band. Phone is USB only, and CW and certain data modes are also permitted on the channels. It's open to General and above, and the power limit is stated as ERP relative to a half-wave dipole, so antenna gain counts. The channel centers are 5332, 5348, 5358.5, 5373 and 5405 kHz. With a USB radio you tune the dial 1.5 kHz lower: 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5. This is a classic way to get it wrong by 1.5 kHz, so read the rule's wording about channel center versus carrier frequency. Also check whether newer rules have added anything, since there was an international allocation change for a small segment of 5 MHz that national rules may or may not have followed.

  • Administrators

I'll pick up with VHF/UHF, digital conventions and the international side.

For VHF/UHF, the key idea is that the bottom of each band is for weak-signal work (CW and SSB, plus modes like FT8) and the FM activity lives higher up. The commonly used calling frequencies from the ARRL band plan are these. Confirm against the current plan, because regional plans can add local variations.

On 6 m, 50.125 MHz is the SSB calling frequency, and the DX window sits just below it around 50.100 to 50.130. 52.525 is the FM simplex calling frequency. On 2 m, 144.200 is the SSB/CW weak-signal calling frequency and 146.520 is the national FM simplex calling frequency. 70 cm uses 432.100 for weak-signal calling and 446.000 for FM simplex. On 33 cm, 902.100 is the weak-signal calling frequency. Activity there is thin, so a lot of operators arrange contacts on a lower band first.

Calling frequencies are for making contact, not for holding a conversation. Establish contact, then move off to another simplex frequency so the calling channel stays free. Most repeater outputs on 2 m and 70 cm are in segments set by the band plan, with standard offsets (commonly 600 kHz on 2 m and 5 MHz on 70 cm), but your local frequency coordinator decides what actually gets used in your area.

On digital: FT8, FT4 and similar modes cluster around specific dial frequencies, such as 14.074 for FT8 on 20 m, 7.074 on 40 m, 3.573 on 80 m, 50.313 on 6 m and 144.174 on 2 m. These are community conventions, not FCC regulations, and not exactly the same thing as the formal band plan. They still fall inside the data segments for the classes that may use them, but verify your own privileges, especially near 40 m, where the General CW/data and phone segments are distinct.

Two cautions on the upper bands. On 70 cm, there are geographic restrictions in the US near certain government radar installations and near the Canadian border for part of the band, so read Part 97 if you're in those areas. On 33 cm (902 to 928 MHz), amateur radio is secondary to other users, and it's shared with unlicensed Part 15 devices, so you may deal with noise and interference. Also, 33 cm is mainly a Region 2 allocation, so don't count on being able to use it overseas.

For international allocations, the world is split into ITU Regions 1, 2 and 3, and the US is in Region 2. The differences affect what you hear and what you can work. 40 m is 7.0 to 7.3 MHz in Region 2, but only 7.0 to 7.2 in Regions 1 and 3, which is why you'll hear broadcast stations above 7.200 in Europe and Asia and why DX often operates split. 80 m is 3.5 to 4.0 in Region 2 but 3.5 to 3.8 in Region 1. 70 cm is 430 to 440 in Region 1 against 420 to 450 in Region 2, and 2 m is 144 to 146 in Region 1 against 144 to 148 in Region 2. 6 m isn't available in every country either.

If you operate abroad, the host country's rules apply, not just your home license's privileges. Check whether an agreement covers you, such as CEPT recommendations for many European countries or the US's IARP arrangements with some others, and confirm the allowed bands, power and any required prefix or identification. The rules for 60 m in particular vary a lot by country.

Finally, treat everything above, including mine, as a starting point and confirm it against the current FCC Part 97 and the ARRL band plan and privileges chart. Both get updated.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.