Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Repeater basics vs. linked systems: offsets, tones, timers, and what changes when a repeater is on EchoLink, AllStar, DMR, or Fusion

ci_cover.jpg

I'd like to collect the practical details that cause the most confusion around repeaters, especially for anyone programming a first handheld or mobile and then finding a repeater that is also linked to something else.

The analog FM side already has plenty of moving parts: the offset and its direction, the access tone on the input, the tone (if any) on the output, a time-out timer, and a courtesy tone that may or may not mean "the repeater is ready." Then some repeaters are connected to EchoLink, AllStar, IRLP, or Wires-X, and some are DMR or D-STAR, where the rules of the road differ.

Some questions to get things started:

1. When a repeater listing shows both a PL tone and a "tone squelch" setting, what is the difference, and which one should you actually set in the radio?

2. How should operators behave on a linked system when you can't hear who is on the other end?

3. How much should you trust online directories compared with the local club's own information?

4. What is the practical difference between an open repeater and a closed one, and how do you find out which one you are dealing with?

Please correct anything that looks off. Local practice varies a lot by region and bandplan, so mention where you are when you answer.

  • Replies 2
  • Views 61
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Here are the analog basics. A repeater receives on its input frequency and retransmits on its output frequency. Your radio transmits on the repeater's input, so "offset" means the difference between the two. In the US, 2 m is commonly 600 kHz and 70 cm is commonly 5 MHz, but the direction (plus or minus) depends on where in the band the output sits. Other regions use different numbers, for example 600 kHz on 2 m but 7.6 MHz on 70 cm in much of IARU Region 1. Always check the local bandplan rather than relying on your radio's auto-offset feature.

The tone confusion usually comes from the fact that CTCSS is used in two directions. The tone your radio sends to open the repeater is the access tone, which is usually what a listing means by "PL" (a Motorola trade name for CTCSS). Some repeaters also transmit a tone on their output. If your radio is set for tone squelch (often called TSQL), it stays silent until it hears a matching tone on the received signal. That is handy for cutting down on noise and on other users on a shared frequency, but it can hide the fact that you are being received weakly or that someone else is on the channel. For a first setup, it is usually simpler to transmit the access tone and leave receive tone squelch off until you know what the repeater sends.

DCS is the digital counterpart to CTCSS: a continuous low-speed data stream with a three-digit octal code. Not all radios treat polarity the same way, so if a DCS repeater won't open, check the normal/inverted setting. Neither CTCSS nor DCS provides privacy or security. They only control which signals open a squelch.

A few etiquette points apply on almost any repeater. Listen first, since you may be about to step on a net or a conversation. Pause for a second or two between transmissions so someone with an urgent need can break in. Keep transmissions short, because the time-out timer is typically a few minutes but is set by the owner and may be much shorter. Identify according to your local rules (in the US, at least every ten minutes and at the end of a communication). And skip the repeated kerchunking to "test" the repeater, which just keys it up with nothing to say. If you want to check that you are getting in, say your callsign and ask for a signal report.

  • Moderators

Linked systems are where the "just talk" habits from a standalone repeater need adjusting. The big thing is that your audio may be going well beyond the local coverage area, and the delay can be longer than you expect. Leave a longer gap between overs, avoid inside jokes or long local-only chatter, and check whether the system is in a net, a scheduled event, or a conference with other repeaters.

The linking methods differ in useful ways. EchoLink is a voice-over-IP system that requires callsign validation, and it can connect through a repeater node or a computer or phone. IRLP uses numbered nodes and connects repeaters through dedicated links, but many people now find AllStar, which is built on Asterisk and app_rpt, easier to deploy and manage. Wires-X is the Yaesu System Fusion approach, with rooms and nodes. Whichever one is in use, the owner's rules for when and how to connect or disconnect matter more than the technology. Do not drop a link someone else brought up unless the repeater's published policy says that's acceptable.

DMR and D-STAR add their own concepts. DMR uses TDMA with two timeslots, a color code that must match, and talkgroups that route your audio. You also need a registered DMR ID, and you should listen on a talkgroup before transmitting, because static talkgroups may carry traffic you cannot hear from your local repeater. D-STAR routes by callsign fields and gateways, and its reflectors have names that include "DCS." That DCS has nothing to do with Digital Coded Squelch on FM, which trips up a lot of newcomers. Also remember that a mixed-mode repeater might carry analog and digital differently, so check the listing for the mode that is actually active.

Coordination is the process by which a frequency coordinator helps avoid interference between repeaters in a region. In the US, a coordinated repeater generally gets priority consideration over an uncoordinated one if there's a dispute, but the details are in the rules and the local coordinator's procedures. Open repeaters can be used by any licensed operator who follows the owner's etiquette. Closed or limited-access repeaters restrict use, usually to club members or those with a specific tone or code. If a listing doesn't say, look at the club's page or ask the trustee.

For directories, RepeaterBook, the ARRL directory, and similar sources are good starting points, but they can lag behind changes. A tone, offset, or status can change without the listing being updated, so cross-check with the local repeater club when something doesn't work. Clubs usually maintain the most accurate information, and joining one often helps support the repeater too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.