Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Starting out on LEO satellites: FM birds first, then RS-44? Doppler, tracking and antenna questions

ci_cover.jpg

I'm putting together a plan for getting into amateur satellite work and want to sanity-check the order of operations. The long-term goal is to work both FM and linear birds (SSB/CW), with RS-44 as the main linear target. The short-term goal is to make a clean contact through an FM satellite before spending money on rotators and a second radio.

This is where I'm at:

Satellites on my list: SO-50, AO-91 and AO-92 for FM, the ISS (APRS on 145.825 MHz, plus the crossband voice repeater when it's enabled), RS-44 for linear, and QO-100 later as a geostationary comparison. I know FM satellite status changes, so I'll check the AMSAT status pages and current frequency listings before every plan I make, not trust my memory.

Tracking: I'm leaning toward Gpredict because it's free and cross-platform, but I keep seeing SatPC32 recommended for Windows setups with CAT and rotator control. Is the difference big enough to matter for a first station?

Antenna: A handheld dual-band Yagi, such as an Arrow-style antenna, seems like the standard entry point. Would a small homebuilt 2 m / 70 cm Yagi do the same job? When does it make sense to move to az/el rotators and a larger Yagi?

Doppler: I understand the basics: the satellite's radial velocity shifts the frequency, and the effect is bigger on 70 cm than on 2 m. For an FM pass, how much manual tuning is realistic? For linear birds, how should I think about it?

Last question: how much do grid squares matter? I know the exchange is often just callsign and 4-character locator, and I'd like to know if there's etiquette or any pitfalls for a first-timer.

  • Replies 2
  • Views 30
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Starting with FM is a good call. It teaches you pass timing, antenna pointing and half-duplex discipline without the extra variable of SSB tuning.

On Doppler: at 435 MHz, a LEO satellite's radial motion can shift the frequency by roughly ±10 kHz over a pass. At 145 MHz it's about a third of that, around ±3 to 3.5 kHz. FM voice has a lot of tolerance on paper, but that's enough drift to make you miss the satellite's receiver passband if you ignore it. The usual approach for FM is to tune the 70 cm side in steps (or let software do it) and keep the 2 m side fixed, or split the correction between the two. Gpredict and SatPC32 will both show the corrected uplink and downlink for the current moment, and both can drive a radio over CAT if you want to automate it. For a first pass, manual stepping with a printed pass sheet is fine.

For the FM birds, check the current setup before each attempt. Several of them use a CTCSS tone on the uplink to open the transponder, and the tones and frequencies can differ per satellite, so verify rather than assume. The commonly cited arrangement for SO-50 is a short arming tone followed by a regular tone, and AO-91/AO-92 use a continuous tone, but again, confirm them on the AMSAT pages for the date you're operating. Also, an FM satellite is a single channel, so keep it short: callsign, grid, signal report if there's room. A longer chat just blocks the next person.

As for the antenna, a handheld dual-band Yagi works fine. The main skill is pointing it at the satellite while keeping the radio, the antenna and the pass sheet manageable. A homebuilt 2 m / 70 cm Yagi is a reasonable project too, but a cross-polarization mismatch or an unexpected feedline loss can hide in a DIY antenna. If your first attempts fail, you'll want to know whether it's the antenna or the technique. A tape measure and an SWR/return-loss check on both bands will tell you a lot.

The ISS APRS is a good low-pressure test. A packet digipeated through the ISS at 145.825 MHz proves your receive chain, Doppler handling and antenna pointing without needing a QSO partner. It's less useful for voice practice, though, because the crossband repeater is only on at certain times. You'll want to look up the current ISS amateur radio status before planning around it.

  • Moderators

On tracking software: both work. Gpredict is fine for pass prediction, mapping, and driving a radio through Hamlib's rigctld and a rotator through rotctld. SatPC32 has been a long-time favourite on Windows for people who want tight CAT and rotator control from one program, and it works well with older rigs. The most important thing with either is fresh Keplerian elements (TLEs). Stale elements mean the predicted time and direction slip, and your Doppler correction drifts with them. Update before each session.

RS-44 behaves differently from the FM birds. It's a linear transponder, and it's inverting, which means that when you tune your uplink higher, the downlink moves lower. The usual convention is to transmit LSB on 2 m and receive USB on 70 cm, so your signal appears with the correct sideband in the downlink. CW stays CW. Since the transponder passband is wide (tens of kHz), you can hear many stations at once, and you can find your own signal in the downlink. The standard technique is to pick a downlink frequency, correct for Doppler, and then adjust your uplink so your own signal lands where you want. If your radio can't be tuned while keeping the downlink fixed, software-controlled Doppler becomes close to essential.

A practical setup question is full duplex. Hearing yourself in the downlink while you transmit is what makes linear operation easy, so you'll want either a radio that can transmit and receive on different bands at the same time, or two radios (for example a transceiver plus an SDR or a second receiver). With FM satellites you can be half-duplex and still do fine, so you can postpone that purchase.

Rotators: you don't need them until holding an antenna by hand starts to compromise the contact. Hand-aiming works well for FM and for ISS passes. A pair of rotators, one for azimuth and one for elevation, becomes valuable when you want a larger Yagi, more gain on low-elevation passes, or both hands free for logging and tuning. Remember that on higher passes the elevation and the azimuth sweep happen quickly, so a rotator with slow movement can lag.

Grid squares: for most contacts, 4 characters is enough (for example FN31). Learn yours, and learn how to look up your partner's. Some operators, and many award programs, care about worked grids, so it's worth logging them from day one.

QO-100 is a different world. It's geostationary, so there's no Doppler to correct and no passes to schedule. You need a fixed dish setup, with an uplink in the 2.4 GHz range and a downlink around 10.489 GHz. It's usually a better fit once you've done LEO and want a steady station. Check the transponder plan and the satellite's coverage before you buy any gear.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.