Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Stuck at 10-12 wpm on the way to 20: what actually breaks the plateau?

ci_cover.jpg

Opening a thread for people working on the 5 to 20 wpm stretch. The early climb to about 10 wpm tends to feel steady. Then many learners stall somewhere around 10 to 14 wpm, and progress stops for weeks even though practice hours haven't dropped. Here is a rough map of the problem, and I'd like to hear what has worked for others.

The plateau often has a mechanical explanation. At 5 wpm, a dit is 240 ms (dit length in ms = 1200 / wpm). At 20 wpm it is 60 ms. Somewhere in between, you can no longer consciously count dits and dahs and translate them into a letter. The brain has to switch from analyzing the character to recognizing it as a single sound pattern, like a spoken syllable. That switch won't happen if you keep slowing down to analyze. It usually needs characters sent at a speed slightly too fast for you to copy comfortably.

That is the reasoning behind two common training approaches. The Koch method starts with the characters at full speed (usually 18 to 20 wpm) and adds one new character at a time as you reach roughly 90 percent accuracy. Farnsworth timing also keeps the characters fast but stretches the gaps between characters and words, so you have time to think. Both avoid the habit of learning at 5 wpm with long, slow characters and then having to relearn everything at speed. If your practice material is sent at a true 8 wpm with normal spacing, consider whether you've effectively trained yourself to count.

Some questions for the thread:

1. Head copy. When did you stop writing every letter down, and how did you make the change? One approach is to start with callsigns and common short words, since those are the most predictable, and keep paper for numbers and names. Another is to write nothing during a practice session and check afterward against the source text.

2. Drills. Which do you find more valuable: random five-character groups, real words, callsign lists, or full text? Callsign drills have a clear payoff because they train fast recognition of mixed letters and numbers, which random words don't. Common-word drills (the, and, for, name, rig, ant, wx, QTH) build the whole-word recognition that matters once you hit QSOs.

3. Software versus ear. Decoders such as fldigi, CW Skimmer, or phone apps are good for confirming what you heard, and poor as a substitute. They struggle with QSB, noise, and hand-sent timing, and if you watch the screen you stop developing your own ability to listen. A reasonable compromise is to copy first, then check with the decoder.

4. Keyer and paddles. Iambic mode A and B behave differently on the final squeeze, and your timing can feel wrong if you've set up the paddles one way and learned on another. Contact gap, paddle tension, sidetone (most people settle somewhere in the 500 to 700 Hz range), and weighting (default is about 3:1 dah to dit) all affect how clean your sending is. Poor sending sounds sloppy to the person copying you, and it also makes your own copy worse because you're training your ear on bad rhythm.

5. On-air practice. Slow CW nets, contest exchanges, and simple rag chews are all useful. Contests are good because the exchange is predictable: callsign, a signal report, a serial number or a zone. You hear the same short patterns repeatedly. If someone sends faster than you can copy, QRS (please send more slowly) is a normal request, and no one should mind it.

What does your weekly schedule look like, and which element of it has made the biggest difference?

  • Replies 2
  • Views 48
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On schedules, the usual advice that holds up is short and frequent: 15 to 30 minutes a day beats a two-hour block on Saturday, because recognition skills consolidate between sessions. A workable week could be two or three Koch or callsign drill sessions at a speed where you copy about 90 percent, one session of slightly-too-fast material that you expect to fail at, and one session of real on-air listening with no pencil.

For the plateau itself, I'd resist the urge to drop the speed when copy gets messy. If a character gets away from you, let it go and stay with the stream. Stopping to figure out what you missed is how you end up two or three characters behind and lose the whole word. Leaving a gap on the paper is a perfectly good trade, and the gaps fill in over time as the recognition gets quicker.

Also, track your results somehow, even with a simple log of speed and percent correct. A plateau is hard to judge from feel alone, and people sometimes improve more than they notice.

  • Administrators

On the keyer side, two things are worth checking before you blame yourself. First, make sure your sending speed isn't well above your receiving speed. It is tempting to set the keyer fast because it feels good, but sloppy 20 wpm sending sounds worse than clean 14 wpm. Second, adjust spacing, not only speed: a slightly longer inter-character gap makes your own fist easier to copy and easier for others to read.

For paddle setup, start with a light touch and a small contact gap, then loosen only if you get accidental double dits. If you're unsure whether you want mode A or B, try both for a week each. Mode B adds an extra element when you release the squeeze at the wrong moment, which trips some people up and suits others fine. Neither is better in the abstract.

For nets and contests, listening before you transmit is underrated. Copy a few exchanges from a contest at your comfortable speed before calling anyone. Many contests also have a slow-speed or low-power class, and a few CW clubs run short, informal timed events aimed at newer operators. Check the current rules and schedules directly from the organizer, since formats and dates change.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.