Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

SOTA planning checklist: from summit reference to a clean log (VHF vs HF, kit weight, safety)

ci_cover.jpg

This thread is for people who are new to Summits on the Air, or who are planning their first activation or chasing session. Please add corrections and local rule differences, because associations can differ in the details.

Summit references. Every SOTA summit has a reference of the form Association/Region-Number, for example W7W/KG-001. The first part identifies the association (W7W is Washington), the two-letter part is the region, and the number identifies the summit inside it. Always take the reference from the SOTA database rather than from memory or a map label, because summit lists and names get updated. Check the activation zone too. It is defined by a vertical distance below the summit high point, so a good operating spot is not always the highest rock.

Activator vs chaser. An activator operates from the summit using portable power and needs enough contacts to qualify the activation (the standard minimum is four QSOs). A chaser works activators from home, a car or anywhere else. Chasers earn points too, and summit-to-summit (S2S) contacts are valuable because both ends are activating.

Points and bonus. Summit points depend on the summit's height and are listed in the database. Some summits also carry bonus points, such as the winter bonus, which has its own season definition and conditions. Check the current General Rules and your association's rules rather than assuming. The long-term awards are Mountain Goat for activators, which is 1000 activator points, and Shack Sloth for chasers, which is 1000 chaser points.

Spots and alerts. SOTAwatch is where activators post alerts (planned time, frequency, mode) and spots (live frequency). Chasers watch it for activators. Alerts help, but plan for weather and delays. A realistic time window in the alert is more useful than an exact time.

Lightweight kits. A common minimum is a handheld or compact radio, a spare battery and a simple antenna. For VHF that can be a handheld with a better antenna. For HF, popular choices include a QRP rig, an end-fed half-wave or linked dipole, a short mast or tree-supported line, a key or mic, a logging pad and a pencil. Test the setup at home first so you are not working out SWR problems with cold hands.

Logging. Write down the callsign, time in UTC, band or frequency, mode and the summit reference. Upload to the SOTA database using its CSV import format, and check the current specification before uploading. Log S2S contacts carefully, including the other station's summit reference.

Safety. Plan the route and a turnaround time, tell someone where you are going, carry layers, water and navigation backup, and check the forecast. Treat lightning as a stop-and-descend situation, not an operating condition. Antennas and masts are not a good thing to be next to in a storm.

Questions to start us off: for a first activation, would you recommend 2 m FM or HF? What is the smallest kit you would actually trust? And what do you check in the database before you leave?

  • Replies 2
  • Views 31
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

For a first activation I would lean towards VHF if there are local chasers and the summit has a clear path to populated areas. A handheld with a decent antenna and a few spare batteries keeps the pack light and the setup quick, so you can reach four contacts early and then decide whether to try more. Check that your region has activity on 2 m FM and use the SOTAwatch alert to tell people which frequency to expect. Remember that VHF depends on line of sight, so a valley summit may be tougher than the numbers suggest. HF gives more reach, but it also means an antenna, a feedline, and more things to get wrong in wind and cold. You can add it on a second trip once the routine of climbing, setting up and logging feels easy.

  • Moderators

On the database side, check three things before the trip: the exact summit reference, the activation zone and any access restrictions or season notes in your association's rules. After that, make the logging habit boring and consistent. Write the time in UTC, the frequency and mode, and the chaser's callsign, and do not rely on memory later. If you work an S2S, copy the other summit reference twice if conditions are noisy and confirm it before moving on. For HF kits, 40 m and 20 m are common starting points because they give both local and longer-range contacts at different times of day. If you are chasing rather than activating, watch spots on SOTAwatch, keep your calls short and wait for the activator to ask for a different format. Pile-ups on summits can move quickly, and a good chaser makes the activator's job easier.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.