Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a first POTA activation: park references, 10 QSOs, spotting and logging basics

ci_cover.jpg

Putting together a checklist for a first Parks on the Air activation, and I'd like input on what trips people up most often. Here is the basic framework as I understand it. Please correct anything that has changed, because the official POTA rules and the pota.app documentation are the final word.

Park references. Every park has a reference made of a entity prefix and a number, such as K-0001 for a US park. Other countries use their own prefixes. Look up the exact reference in the POTA app or on the park's page before you go, and write it on your log sheet or enter it in your logger. Some places have more than one reference, which is where two-fers come in.

Activator vs. hunter. The activator operates from inside the park boundary. The hunter works the activator from anywhere, including home. Each role has its own credit and its own awards track. You can do both, but the log and upload steps differ.

The 10-QSO line. An activation is generally counted as valid once you have 10 contacts from the park within a single UTC day. Plan around UTC, not local time, especially if your operating window crosses midnight UTC. Contacts made before and after the UTC rollover are counted on different days, so they don't add up to one activation.

Spotting. Hunters find you through spots on pota.app. You can self-spot through the site or app, and on CW and some digital modes automated spotting may pick you up. A good spot has the right frequency, mode and park reference. If you move frequency, update the spot. When you finish, post a QRT or sign-off note so hunters don't keep calling a dead frequency.

Logging. Most people log in a program that exports ADIF, and the upload needs the park information in the correct fields. The POTA-related fields are SIG and SIG_INFO for the park you worked, and MY_SIG and MY_SIG_INFO for the park you are in. Check the current upload guidance on the site, because malformed logs are a common reason for credit not showing up.

Antennas and power. There is no required power level, so anything from QRP to 100 W is workable. What matters more is a station you can deploy quickly within what the park allows. Common options include an end-fed half-wave, a linked dipole, a vertical with radials, or a portable mast. Check the park's rules on trees, stakes, mast guying and vehicles, since these vary and some parks restrict them. Also check whether a permit or a different park manager's approval is needed.

Rove and two-fer. A rove means activating several parks in the same outing or day. Each park still needs its own 10 contacts in the UTC day to count. A two-fer or multi-fer is a location covered by two or more park references, such as overlapping park designations. You log each contact for every reference you're in, and each reference needs 10 contacts to be valid. Say both references when you call or spot so hunters can log them correctly.

Questions for everyone: What is the best way to schedule band changes when you're short on contacts? How do you decide between SSB, CW and FT8 for a first activation? And what is the one piece of kit you'd add to a minimal go-bag?

  • Replies 2
  • Views 30
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On the band and mode question, there's no single right answer, but there are good trade-offs. SSB is simple and welcoming for new hunters, but it needs a decent signal and a clear frequency. CW is very efficient with low power and a wire antenna, and automated spotting can bring hunters quickly if your CW is clean. FT8 is dependable for contacts but works against the rhythm of a hunter pileup, and a lot of hunters prefer voice or CW. If you only have QRP and a simple antenna, CW or a well-timed SSB call on 40 m or 20 m is a sensible starting point.

For band changes, pick the band by time of day and distance. Lower bands such as 40 m tend to be better for regional contacts when the sun is lower, and 20 m or higher is usually more useful for longer distances during daylight. Check propagation tools before you leave and keep a second antenna option, like a linked dipole, so a band change doesn't mean rebuilding the station.

One logging tip: record the park reference in your logger before the first call. It's much easier than fixing it afterward when you've got a pile of contacts.

  • Moderators

For the go-bag, I'd add a few small items that save the most trouble: a spare coax jumper, a short length of rope or paracord for lifting a wire, a pen and paper for backup logging, and a battery with a known capacity. A notepad is not glamorous but it covers you when the phone dies or the logging app misbehaves. A small tape measure or pre-marked wire lengths also help when setting up a dipole quickly.

On rules, treat the park's own regulations as separate from the POTA program. POTA expects you to be in the park and to follow local rules, but each site may have its own restrictions on where you can set up, quiet hours, vehicles, and tree use. If you can't find the rules online, contact the park office before you go, especially for a rove with several stops. Also look up whether a location counts as a two-fer, since not every shared area is obvious from the map.

As for awards, they come after you've got activations in the log. Focus first on a clean ADIF file and correct references. If something doesn't show up, check the uploaded fields, the UTC date, and whether you reached 10 contacts for each reference before assuming it's a site error.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.