Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Preparing for the Element 4 Amateur Extra exam: what to prioritize across the 50 questions?

ci_cover.jpg

I'm planning a study schedule for the Amateur Extra exam (Element 4) and want to sanity-check my priorities. The exam is 50 multiple-choice questions drawn from the public question pool, and a passing score is 37 correct. You need to have Technician and General credit first. The pool covers a lot of ground: Part 97 rules, operating procedures, radio wave propagation, amateur practices, electrical principles, circuit components, practical circuits, signals and emissions, antennas and transmission lines, and safety.

My problem is that the topics feel very uneven. Some of them are plain memorization, like Part 97 and operating practices. Others are calculation-heavy, like Smith chart problems, op amp gain, filter design, and modulation index. I'd like to hear how others split their time between the two kinds. Specifically:

1. Which advanced electronics topics are worth real understanding (transistor biasing, op amp configurations, active filters, oscillator types, amplifier classes) and which can be handled by recognizing patterns in the questions?

2. How much Smith chart skill does the exam really need? Do I need to plot on paper, or is it mostly conceptual?

3. For Part 97, what trips people up most: station control, third-party traffic, power limits, or the privilege segments on each band?

4. Beyond the exam, what does Extra change in practice? I know the Extra-only segments at the bottom of 80, 40, 20, and 15 meters and the wider phone allocations. Is there anything else worth knowing?

Any study order or resources you'd recommend are welcome. I'd rather understand the material than memorize answer letters.

  • Replies 2
  • Views 28
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

I'd treat the pool as three buckets.

First, the concepts that repeat in different wording. Oscillators are a good example. The Barkhausen idea is that a loop oscillates when gain around the loop is at least unity and the feedback phase shift is 0 or 360 degrees. Past that, you mostly need to recognize the family. Hartley uses a tapped inductor, Colpitts uses a capacitive divider, and Pierce uses a crystal. Amplifier classes work the same way: Class A conducts for the full 360 degrees of the cycle, Class B for about 180, Class AB for between 180 and 360, and Class C for less than 180. Learn the definitions once and those questions are easy points.

Second, the formulas you should be able to run with a basic calculator. For op amps:

Inverting gain = -Rf / Rin
Non-inverting gain = 1 + Rf / Rin

With Rf = 47 k and Rin = 4.7 k, the non-inverting gain is 1 + 10 = 11. The inverting gain is -10, which also means a 180-degree phase inversion. For FM, modulation index = peak deviation / modulating frequency. A 3 kHz deviation with a 1 kHz tone gives an index of 3. Deviation ratio is similar but uses the maximum deviation and the highest modulating frequency.

Third, the stuff you simply have to memorize. That includes filter terminology: Butterworth is maximally flat in the passband, Chebyshev allows ripple for a steeper cutoff, and Bessel preserves phase and group delay better. Also learn shape factor, which is the ratio of the stopband bandwidth to the passband bandwidth, so a lower number means a sharper filter.

I'd start with the calculation topics, since they're where wrong answers come from, and leave the pure memorization for the final week or two.

  • Moderators

On the Smith chart, the exam is mostly about understanding what the chart shows rather than plotting on it. These are the ideas that come up:

The center of the chart is the normalized impedance 1 + j0, a perfect match. You normalize by dividing the load impedance by the characteristic impedance, so a 100 ohm resistive load on 50 ohm line plots at 2.0 on the horizontal axis, which is an SWR of 2:1. Circles centered on the chart's center are constant SWR circles. Moving along one by a full revolution corresponds to half a wavelength of line, so a quarter wavelength takes you to the opposite side of the chart. Moving toward the generator is clockwise. The upper half is inductive reactance and the lower half is capacitive. The outer edge represents pure reactance, with no resistance.

A related transmission line fact is that a quarter-wave section transforms impedance according to Z0 = sqrt(Z1 x Z2). To match 50 ohms to 200 ohms you'd need a 100 ohm quarter-wave section.

For Part 97, the questions that tend to catch people are the specifics: who can be the control operator, what the station identification rules are, what counts as third-party communication and with which countries, and what the power and spurious emission limits are. Read the actual text of the rules alongside the pool instead of trusting only the answer keys. The reasoning is usually clear once you've seen the rule in context.

As for what Extra changes, you get every amateur band and mode privilege. That includes the Extra-only 25 kHz CW and data segments at the bottom of 80, 40, 20, and 15 meters, and the lower phone edges on those bands that General doesn't have. Extras can also qualify as volunteer examiners for all license classes and apply for the shorter vanity call sign groups. Check the current band plan and rules before transmitting, since allocations can change.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.