Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Band plans vs. FCC rules: how to find where you can legally operate, and where you should, from 160 m to 33 cm

ci_cover.jpg

I'm trying to sort out the difference between what the FCC says I can do and what the band plan says I should do. Here are the questions I'd like help with:

1. Is the ARRL band plan a rule or a recommendation?
2. How close to a band edge is safe on SSB and on digital modes?
3. What can each US license class use on HF?
4. What are the 60 m channels?
5. Which simplex calling frequencies on 6 m, 2 m, 70 cm and 33 cm should I know?
6. How do international allocations change things if I travel or work DX?

Corrections are welcome if I've mixed anything up. Everything here should be checked against the current Part 97 and the current ARRL band chart.

  • Replies 2
  • Views 32
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

Start with the legal versus voluntary split, because it answers half your questions. Part 97 (mainly 97.301 to 97.305) is the law. It sets which frequencies each license class may use, which emission types are allowed in each segment, and the power limits. The ARRL band plan is a voluntary guide that says where the community has agreed to put CW, digital, SSB, beacons, repeaters and so on. Operating outside the plan won't earn an FCC citation, but you may cause interference, and other operators will tell you about it. Operating outside your privileges is a violation.

US HF privileges by class are easiest to remember as slices. Extra has everything. General has most of each band but not the bottom of the 80, 40, 20 and 15 m phone bands. Those slices are Extra-only: 3.600 to 3.800, 7.125 to 7.175, 14.150 to 14.225 and 21.200 to 21.275 MHz. Extra also has small exclusive CW/data slices at the very bottom of 80, 40, 20 and 15 m (3.500 to 3.525, 7.000 to 7.025, 14.000 to 14.025 and 21.000 to 21.025). General phone starts at 3.800 on 80/75 m, 7.175 on 40 m, 14.225 on 20 m and 21.275 on 15 m. On 10 m, General can use 28.000 to 29.700 MHz.

Technicians have limited HF: CW on parts of 80, 40 and 15 m, CW and data on 10 m from 28.000 to 28.300, and SSB on 10 m from 28.300 to 28.500, all capped at 200 W PEP. Technicians get all privileges on 50 MHz and above, which is why 6 m, 2 m and 70 cm are the usual starting bands. Novice and Advanced licenses are no longer issued but are still valid for existing holders, so you may hear those slices mentioned.

Band edges are about occupied bandwidth, not your dial readout. A signal that reads 14.349 on the dial in USB puts its upper sideband above 14.350. Keep the whole signal inside, roughly 3 kHz for SSB. On USB, set the dial at least that far below the upper edge. On LSB, set it that far above the lower edge, so a General on LSB at the 3.800 edge should sit at about 3.803 or higher. Dial calibration errors and your own audio processing add more margin to worry about, so I leave a bit extra. Digital modes like FT8 sit at a dial frequency plus an audio offset, so the same logic applies. Add your audio tones to the dial frequency and make sure the highest tone is still in band.

The 60 m band is channelized, not a continuous band, in the US. The five channels, listed as USB dial (suppressed-carrier) frequencies, are 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5 kHz. They're open to General, Advanced and Extra, but not Technician. Amateurs are secondary users there, so interference to federal users is a real issue, and the power limit is expressed as ERP relative to a half-wave dipole, not as transmitter output. The FCC also added a small power-limited segment around 5351.5 to 5366.5 kHz after WRC-15. Check 97.303 for the exact power and mode details before using it, because 60 m is the band where small details matter most.

For digital on HF, the common FT8 dial frequencies are 1.840, 3.573, 7.074, 10.136, 14.074, 18.100, 21.074, 24.915 and 28.074 MHz. These are conventions, not rules, but they let everyone find each other. The 30 m band (10.100 to 10.150) is CW and data only, with a 200 W PEP limit, so no phone there. Also stay away from beacon frequencies like 14.100 on 20 m and the 28.200 to 28.300 beacon sub-band on 10 m.

  • Administrators

For VHF and UHF, the band plan matters more than the license class, because the whole band is shared and the plan is the only thing separating weak-signal work from repeaters. The rough rule is that weak-signal CW and SSB live at the bottom of each band, FM and repeaters are higher up, and simplex calling frequencies are fixed spots where you make contact and then move.

On 6 m (50 to 54 MHz) the bottom 100 kHz or so is CW and beacons, with SSB and CW DX above that. The SSB calling frequency is 50.125 MHz, and FT8 is normally on 50.313. FM simplex calling is 52.525 MHz, with repeaters in the upper portion of the band. On 2 m (144 to 148 MHz) the weak-signal area is at the bottom, with 144.200 MHz as the SSB calling frequency. The national FM simplex calling frequency is 146.520, and standard repeater offsets are 600 kHz, with repeater outputs generally in the 146.6 to 147.4 range. APRS in North America is on 144.390. On 70 cm (420 to 450 MHz) the national FM simplex calling frequency is 446.000. The weak-signal SSB calling frequency is 432.100 MHz. Repeaters are usually 5 MHz apart, around 442 to 445 and 447 to 450, depending on local coordination. On 10 m there is also an FM simplex calling frequency at 29.600 MHz.

For 33 cm (902 to 928 MHz) the allocation is secondary and shared with ISM and unlicensed devices, so noise can be a problem. Weak-signal activity is concentrated near the bottom, and FM and repeater use varies by region. The band is also only available in ITU Region 2, so it's not a worldwide band. I'd check the current ARRL band plan and your local frequency coordinator for this one rather than rely on remembered numbers. The same applies to repeater offsets and input and output pairs everywhere else on VHF and UHF. Local coordination bodies decide what's actually in use, and they sometimes differ from the national plan.

A calling frequency is only for making contact. Call, get an answer, then agree on another simplex frequency and move, so the calling channel stays free for others.

On international allocations, ITU divides the world into three regions, and the US is in Region 2. National regulators then decide how to implement each region's allocation. Examples: 40 m is 7.000 to 7.300 MHz in Region 2 but only 7.000 to 7.200 in Regions 1 and 3. 80 m is 3.500 to 4.000 in Region 2, but narrower in Region 1 and Region 3. 2 m is 144 to 148 MHz in Regions 2 and 3 but only 144 to 146 MHz in Region 1. The 70 cm band is 430 to 440 in Region 1. The 60 m band varies widely by country, and some countries have no access or use a different layout from the US channels. When you work DX, a station may be in a segment that you can't legally use, so always check your own privileges, not theirs. If you travel and operate abroad, check whether the country has a reciprocal operating agreement or CEPT arrangement with the US, and follow that country's rules, which include its band edges and power limits.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.