Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Which online tools and apps belong in a ham's daily toolkit? Spotting networks, lookups, propagation and mobile apps

ci_cover.jpg

There are now more ham radio web tools and apps than anyone can keep open at once, and they overlap a lot. QRZ.com and HamQTH both do callsign lookups and logbooks. DX clusters, the Reverse Beacon Network, PSK Reporter, POTA and SOTA all provide spotting, but they work in different ways and answer different questions.

Here is how I'd sort them. The questions I'd like the thread to answer are about which tool is best for which job.

For "who is on the air right now?", the DX cluster is the traditional answer. Users and skimmers post spots, and clients or web pages such as QRZ's DXwatch display them with frequency, callsign, comment and UTC time. For "how is my signal getting out?", the Reverse Beacon Network (CW and RTTY skimmers) and PSK Reporter (digital modes such as FT8 and FT4) report who heard whom, usually with signal-to-noise figures and grid squares. POTA and SOTA each have their own spot pages for activators and hunters. For lookups and logging there are QRZ and HamQTH. RepeaterBook covers repeater directories, HamStudy covers exam prep, and HamCalc covers calculations.

What does your core set look like for a casual evening of DXing, a park activation, or mobile operation? Which tools do you consider redundant, and where do their data tend to mislead people?

  • Replies 2
  • Views 31
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

It helps to separate human spots from automated ones, because they answer different questions. A DX cluster spot from a person tells you someone believed a station was workable at that moment. It can be wrong: busted callsigns, a wrong frequency, or a pileup that has already moved. Treat a spot as a lead and listen before you call. Skimmer-generated spots are different. They show that a decoder somewhere heard a CQ at a measured signal strength, which is stronger evidence of a real signal but says nothing about whether the operator is still there.

The Reverse Beacon Network works best as a check on your own station. You need to be calling CQ on CW or RTTY, and the report shows which skimmers heard you and how strongly. Comparing a few bands in the same time window can show whether an antenna change helped. PSK Reporter does the same for digital modes, but only if your software is configured to send reports (in WSJT-X this is a setting you enable). Both show where receivers are, not where propagation exists. If there are no skimmers in a region, a blank map there means nothing.

For propagation outside those maps, the usual inputs are solar flux, the A and K indices, and band-by-band MUF or prediction tools. They suggest what is likely, not what is happening. A live spot on the band beats a forecast.

  • Administrators

On the POTA and SOTA side, the main thing to know is that spots drive the whole hunting experience. Hunters watch the spot page and activators depend on being listed. For POTA, the site accepts spots and also shows automated ones for some CW activity, so check the current help pages for what is supported. Self-spotting rules and etiquette differ by program, so read each one's guidance instead of assuming they match. Give an accurate frequency and mode, and update or retire the spot if you move or QSY.

For repeater and mobile use, RepeaterBook is useful for finding nearby repeaters with offset, tone and mode. The listings are user-maintained, so confirm that a repeater is still on the air and that the tone is correct before relying on it. Keep any phone app use for when you're parked, not while driving.

A few smaller points. QRZ and HamQTH are both callsign databases, and many hams keep their logs in one and mirror them to the other for convenience. Be aware of what you publish in a profile, especially a home address. For study, HamStudy's practice exams and spaced repetition are aimed mainly at the US license pools, so confirm they cover your exam system. For grid squares, a Maidenhead map is handy for POTA, VHF contests and FT8, where a 4-character grid is the usual exchange. HamCalc is best kept for the occasional antenna length, impedance or filter calculation, and I wouldn't treat it as a live tool.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.