Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 412.9 km/s
Aurora 1
Updated 14:00 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Band plans vs. regulations: how do you decide where to operate on 160 m through 33 cm, and how close to the band edge is safe?

ci_cover.jpg

I'm trying to get a clear picture of how the pieces fit together when choosing a frequency. There seem to be at least three layers: what the FCC rules actually require, what the ARRL band plan recommends, and what people do by convention (FT8 watering holes, calling frequencies, nets). I'd like help sorting out:

1. Which parts of the HF band plan are legal limits and which are voluntary?
2. How do you stay inside a band edge or sub-band edge when your signal has width?
3. How do license class privileges map onto the CW/data and phone segments from 160 m to 10 m?
4. What's the deal with 60 m channels?
5. For 6 m, 2 m, 70 cm and 33 cm, where are the simplex calling frequencies and weak-signal areas?
6. How do international allocations change things when you travel or work DX?

Please flag anything that varies by region or that I should confirm against the current rules before transmitting.

  • Replies 2
  • Views 28
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start with the layers. Part 97 (mainly 97.301 through 97.307) is the legal layer. It defines which bands each license class can use, which sub-bands are restricted by emission type, and the power limits. The ARRL band plan is a recommendation built on top of that. It tells you where CW, narrowband digital, SSB, SSTV, beacons and so on are customarily placed so they don't trample each other. Nobody gets cited for running PSK31 at the wrong spot in the digital area, but you'll get complaints, and 97.101 still expects you to cooperate with other users. The FT8 frequencies (7.074, 14.074, 21.074, 28.074 and so on) are convention only. They aren't in the rules or in any legal band plan.

On license privileges, here's the HF picture for the US. Check the current Part 97 chart before relying on my summary, because details can change.

Technician: CW on parts of 80, 40 and 15 m (roughly 3.525-3.600, 7.025-7.125, 21.025-21.200 MHz). On 10 m, 28.000-28.500 MHz, with CW and data in the lower part and SSB in 28.300-28.500. HF power is limited to 200 W PEP. Everything above 50 MHz is open to Technicians.

General: most of 160 through 10 m, with the lower or edge segments of 80, 40, 20 and 15 m reserved for Extra. Examples: General phone on 75 m starts at 3.800, on 40 m at 7.175, on 20 m at 14.225, and on 15 m at 21.275. General CW/data on 20 m starts at 14.025.

Extra: everything, including the Extra-only slices like 3.500-3.525, 7.000-7.025, 14.000-14.025 and 21.000-21.025 (CW/data), and the lower phone segments General can't use.

Bands like 160 m (1.800-2.000), 30 m (10.100-10.150, CW/data only, 200 W PEP), 17 m (18.068-18.168) and 12 m (24.890-24.990) are shared by General and Extra. 30 m has no phone at all. 17 m and 12 m allow all modes. Those three are the WARC bands, where contests don't take place.

Band edges: the rule is that your whole emission has to stay inside the allowed segment, not just your dial frequency. The two most common mistakes come from sidebands. Above 10 MHz, SSB conventionally uses USB, so the signal extends above the dial frequency by up to about 2.7-3 kHz. At the top edge of 20 m (14.350), keep the dial far enough below that the whole signal fits. Below 10 MHz you use LSB, so the signal extends below the dial. If you're a General on 75 m, 3.800 on the dial puts part of your signal below 3.800, which is outside your phone privileges. Keep the dial a few kHz inside, so 3.803 or 3.805 or higher, depending on your filter. Allow extra margin if your dial readout or transceiver calibration is off. For CW, keep the signal and its keying sidebands inside the edge too. For digital modes, remember that the dial frequency usually isn't the signal frequency. In USB-D, the transmitted audio tones add to the dial frequency, so a signal at 1500 Hz audio on a 14.074 dial is at 14.0755. Check that the highest tone you can generate still fits.

For 60 m, the US allocation has historically been five channels rather than a continuous band, with the dial (USB) frequencies at 5330.5, 5346.5, 5357.0, 5371.5 and 5403.5 kHz, and center frequencies 1.5 kHz above those. You tune the radio in USB so your signal is centered correctly in the channel, and the power limit is stated as 100 W effective radiated power relative to a half-wave dipole, so feed line loss and antenna gain matter. General and Extra only. Allowed modes have been expanded over the years to include CW and some digital modes in addition to USB voice. Because of WRC-15's international 5351.5-5366.5 kHz allocation and subsequent FCC action, the US rules on 60 m have been in transition. Read the current text of 97.303 and the FCC's latest notices on 60 m before you operate. Don't rely on a memorized channel list.

  • Moderators

Adding the VHF/UHF side and the international piece.

6 m (50-54 MHz): the bottom is weak-signal territory. 50.0-50.1 is CW only, with beacons around 50.060-50.080. The SSB calling frequency is 50.125. 50.313 is the usual FT8 frequency. The FM simplex calling frequency is 52.525. Tune around the DX windows if you're hoping for sporadic E or F2 openings, and listen on the CW and SSB sections before assuming the band is dead.

2 m (144-148 MHz): 144.0-144.1 is CW and EME. The weak-signal calling frequencies are 144.050 (CW) and 144.200 (SSB). 146.52 is the national FM simplex calling frequency. Common simplex is also spread across about 146.40-146.58 and 147.42-147.57. Repeater pairs in most areas use 600 kHz offsets (inputs and outputs spread across 146.0-146.4 and 146.6-147.4), but regional frequency coordinators set the details, so check local lists and don't assume the national plan. 144.390 is APRS in North America. FT8 is conventionally on 144.174. Satellites sit around 145.8-146.0.

70 cm (420-450 MHz): 446.000 is the national simplex calling frequency. SSB and CW weak-signal work is around 432.100. Repeater outputs and inputs are mostly 5 MHz apart, but again that's coordinated locally. Part 97 has geographic restrictions on 70 cm, such as Line A in the north and areas near certain government radars, so look up the notes in 97.303 if you're near those.

33 cm (902-928 MHz): this is an unusual band because it's shared with unlicensed Part 15 devices and other services, so noise and interference are common, and amateur use is secondary. The weak-signal CW/SSB calling area is around 903.1 MHz (some plans also list 902.1). FM and repeater arrangements depend heavily on local coordination, so check your area's plan instead of assuming a national simplex channel. Also note that 902-928 MHz is only allocated for amateurs in ITU Region 2, which is the Americas.

International: the ITU divides the world into three regions, and amateur allocations differ. 80 m is 3.5-4.0 MHz in Region 2 but only 3.5-3.8 MHz in Region 1 (Europe, Africa, Middle East) and around 3.5-3.9 in Region 3 depending on the country. 40 m is 7.0-7.3 MHz in Region 2 but only 7.0-7.2 in Regions 1 and 3. That's why US phone operators at 7.175-7.300 sometimes hear shortwave broadcasters on top of them, particularly at night. 2 m is 144-148 MHz in Region 2 but 144-146 in Regions 1 and 3. 70 cm is also narrower elsewhere (for instance 430-440 MHz in much of Region 1). Since country rules and IARU regional band plans vary, when you travel or operate under a reciprocal or CEPT arrangement, you follow the host country's license conditions, not your home privileges. Look up that country's rules and the relevant IARU region band plan beforehand.

A practical habit: keep the current ARRL band plan, the Part 97 privilege chart, and your local frequency coordinator's list handy. When in doubt, move your dial well inside the edges, listen first, and ask if the frequency is in use.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.