Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

SOTA basics for new activators and chasers: summit refs, points, spotting, kit and logging

ci_cover.jpg

A thread for people thinking about trying Summits on the Air, whether you plan to carry a radio up a hill or work the people who do. Corrections are welcome, since details vary between associations.

Summit references. A reference looks like W7W/KG-001. The first part is the association (W7W is a US association), the two-letter part is the region within it, and the number identifies the summit. Numbers within a region are often ordered roughly by height, but check the SOTA database rather than assuming. When you log or spot, use the full reference exactly as written. A wrong digit sends the chaser's log to the wrong summit.

Activator and chaser. The activator operates from the summit, and the chaser works them from anywhere, including the home shack, the car, or another summit. To count as an activation you need at least four contacts made from within the activation zone, which is the area within 25 vertical metres of the summit's high point. Summit-to-summit (S2S) contacts are popular because both stations are activating and both can claim the contact.

Points and bonus. Each summit carries a point value based on its height, and higher summits are worth more. Some summits also carry a seasonal bonus, usually in winter, which only the activator receives. Activator and chaser points are tracked separately. Look up the current scoring rules on the official SOTA site before planning around bonuses, because they are defined per association and can change.

Awards. The best-known long-term goals are Mountain Goat for 1000 activator points and Shack Sloth for 1000 chaser points. Shack Sloth shows you can earn points without hiking at all, so chasing is a legitimate way to take part.

SOTAwatch and the database. Activators post a spot on SOTAwatch (or through a spotting app) with the summit reference, frequency and mode, and chasers watch for it. The SOTA database holds the summit lists and your logs. After the trip you upload a CSV file of your contacts for the activation, and chasers upload their own logs. Keep your notes tidy: UTC date and time, band, mode, callsign, and the other station's summit reference if it was an S2S.

Kit. Light usually beats powerful. Typical choices include a QRP HF rig with an end-fed half-wave or linked dipole on a fibreglass pole, or a VHF handheld with a better antenna than the stock rubber duck, such as a roll-up J-pole or small Yagi. HF opens up longer paths and more chasers. 2 m FM can be easier to set up and works well in areas with an active local community. Pack spare batteries, a simple logging method (pencil and waterproof paper still work), and a pole-and-guy setup that handles wind.

Safety. The radio is the optional part of the day. Check the forecast and have a turnaround time. Tell someone your route and return time, and carry layers, water, a light, and a way to call for help. Take down antennas and move off the top if thunderstorms threaten, because a wire antenna on an exposed summit is a bad place to be. Also check access rules and landowner permissions for the specific summit.

Questions to get the discussion going: What would you tell someone planning their first activation about band choice? How do you decide when to spot, and how do you handle a pile-up when you only have a few watts?

  • Replies 2
  • Views 29
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On band choice, a sensible starting point is to pick the band that matches who you expect to work. If the summit is in an area with local activity, 2 m FM can give you your four contacts quickly, and the gear is small. HF is better when you want chasers from farther away or want S2S contacts, so 40 m and 20 m with CW or SSB are common choices. If you go HF, a linked dipole is forgiving because you can switch bands by moving the links. An end-fed half-wave is quick to deploy but needs a decent counterpoise and a matching unit or a tuned design.

Whatever you choose, be clear about the order of events: spot once your antenna is up and you are ready to transmit, then listen before calling CQ. If you spot too early, chasers call you before you are set up, and a rushed setup is how you end up with an SWR problem on a cold summit.

  • Administrators

Two logging habits that save trouble later. First, treat the log as part of the operation: write the time in UTC as you go, because converting from local time after a long hike is where mistakes creep in. Second, record the other station's summit reference when you get an S2S, since that is the detail the database needs to match both sides.

For pile-ups at low power, keep exchanges short: callsign, signal report, move on. Work the strongest stations first, then ask for the weaker ones by partial callsign. If conditions are poor, a quick change of band or mode can give you contacts you would never get on the original frequency. For chasers, listen to the activator's pace. Call once when they finish a contact, give your full callsign clearly, and avoid repeating yourself on top of other callers.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.