Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Breaking a pileup on a Clipperton or Bouvet-type DXpedition: split, timing, tailending and low-band tactics

ci_cover.jpg

With a rare-entity DXpedition (a Clipperton or Bouvet-style operation, where the logistics are heavy and the operating window can be short), the difference between getting in the log and not usually comes down to a few mechanical habits rather than power or antennas. I'd like to collect what people consider best practice, and where opinions differ.

Here is how I'd break it down. First, listen before you touch the key. Work out whether the DX is operating split, where they are listening ("up 1 to 5", "up 5 to 10", or a wider range), and how they are picking callers: by callsign fragment, by call area, by continent, or by whoever stands out. Set VFO A to the DX's transmit frequency and VFO B to a receive spot, put the radio in split, and confirm the TX indicator is on the frequency you intend before you send anything. Many unnecessary pileups on the DX's own frequency come from a split that was set up but not verified.

Second, timing. A big pileup is not random. Operators tend to pick through a certain part of the spread, and the pattern is often visible if you listen to a few exchanges. Calling in the same slot as everyone else means you are buried by the loudest 20 stations. Many people prefer to call when the QSO finishes and the DX sends a short QRZ, or a few seconds after, when the heaviest wave has passed. Keep calls short. On CW that means your callsign once or twice, not a long string. Send, then listen for a response.

Third, the contentious part: tailending. Calling right at the end of someone else's QSO can work when the DX is running fast and expects it. It is bad practice if the operator is working strictly by callsign and you are stepping on the confirmation. Where an operator asks for no tailending, honor it. If you are unsure, wait for the DX to send their QRZ or a callsign request.

Fourth, the cluster and Club Log. Treat DX cluster spots as a prompt to listen, not as confirmation. Spots can be wrong, busted, or stale, and the listening frequency in the comment is often more useful than the spotted frequency. The Reverse Beacon Network can help for CW and RTTY, since it shows what skimmers near you actually hear. Club Log's Most Wanted data helps explain why some entities draw bigger crowds, and for expeditions that upload logs, searching the log after the operation gives a more reliable check than assuming a QSO went through.

On 160 and 80 meters, the problem is mostly receive. If you can't hear the DX station, no amount of transmit technique helps. Grayline timing, a decent receive antenna and a quiet location matter more than power. So my questions are these. How do you decide when the pattern means "wait" versus "call now"? And what is your rule on tailending?

  • Replies 2
  • Views 36
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

On tailending, my rule of thumb is to follow the operator's cadence. If the DX is sending a call and a short report back to back, with very little dead air, a well-timed call just as the QSO ends is normal. If they are slow and deliberate, perhaps repeating the full callsign for confirmation, then calling over the confirmation just creates a mess and may cost them a repeat. It also helps to listen to the exchange itself. If the DX has to ask for a callsign twice, the pileup is too thick to be tailending in.

On timing, one trick is to pay attention to which part of the spread the DX is tuning through. Many operators work their way up the listening range and then reset. If they have just come back down to the bottom, a call a couple of kilohertz above that is often more productive than calling where everyone else is. It is not guaranteed, but it is a better use of a transmission than calling the same place for ten minutes. Also, if you transmit and hear nothing, do not just keep repeating. Listen for a few cycles, because the DX may be moving through callers methodically.

For phonetics, keep to standard ITU forms unless the operator clearly prefers another. Inventing creative phonetics for a rare station tends to slow things down. Choose one set of words and use the same ones every time you call, so the operator can match the pattern.

  • Administrators

For the low bands, I'd add that the receive chain matters more than people expect. For 160 and 80, small receiving antennas such as Beverages or loops can make an unreadable signal copyable, and a good transmit antenna cannot compensate for a noisy location. Because DXpeditions are often limited on those bands, the target may have low power and a compromised antenna, so there may only be a narrow window around grayline, which means you should have your station ready before it opens, not while it is happening.

On top band, calling away from a crowded frequency is more important still. The DX often listens up by a small amount, for example 1 to 5 kHz, and calling on their transmit frequency can disrupt the whole operation. So confirm your VFOs, check that your rig is not set to transmit simplex, and keep your calls brief. If the DX is calling CQ with a listening instruction, follow it exactly. If you are not sure, keep listening a little longer.

For digital modes, if the operation uses the Fox/Hound mode in WSJT-X, read the instructions carefully. Fox transmits on a specific region, hounds should call above the stated frequency, and the rules about where to call can be different from a CW or SSB pileup. The usual advice for hounds is to avoid calling on Fox's own frequency, and to follow the software's workflow rather than improvising.

On the cluster, use it for discovery and then judge by ear. Spot only what you have actually heard, include the listening frequency when you know it, and avoid adding noise with repeated spots. A good spot comment can save others a lot of guessing; a vague one adds to the problem.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.