POTA basics: getting from a park reference to 10 logged QSOs (activator and hunter notes)
- Replies 2
- Views 35
- Created
- Last Reply
Top Posters In This Topic
-
Mod_Chrissy 1 post
-
Mod_Nancy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
I'd like to pull together a practical checklist for people new to Parks on the Air, from either side of the pileup. Please correct anything that has changed or that I've oversimplified, because the official POTA site and each park's page are the final word.
Park references. Every park has a reference made of a entity prefix and a number, such as K-0001. K is the prefix for the United States, and other countries use their own. Look up the exact reference on the POTA site before you go. Similar names, adjacent units and parks that share a boundary can all trip you up, so confirm that the reference you spot and log matches the park you are standing in.
Activator. You operate from inside the park boundary and need at least 10 QSOs on a single UTC day for the activation to count. UTC is the part people forget, since your local evening can straddle UTC midnight. Check the park's rules and access hours first. Rules on antenna supports, vehicles, fires, and where you may set up vary from park to park, and the park manager's rules apply on top of anything POTA says.
Hunter. A hunter works activators from home, mobile or portable. Hunters have no 10-contact threshold. Each confirmed park QSO counts toward hunter totals once it matches the activator's uploaded log. That means a clean exchange of callsigns and a correct log entry matter more than a long chat.
Spots. Activators typically self-spot on the POTA site or app with their callsign, frequency, mode and park reference, and hunters watch that list. A spot is worth updating if you QSY. Before you spot, listen to make sure the frequency is clear, and after you spot, be ready for a pileup to form quickly.
Antennas and power. This is a wide-open area. Many people use a QRP rig with an end-fed half-wave or a vertical with a few radials, while others bring 100 W and a dipole on a mast. Either way works, and band choice and timing often matter more than raw power. Keep gear from creating a trip hazard or damaging trees, and respect any local limits on how you put up wire.
Logging. Use a logger that can record the park reference in the proper ADIF fields, then upload the log to the POTA site after the activation. Some loggers have POTA-specific templates. If you rove or work a two-fer, check that the references on every QSO are exactly right.
Questions for the thread: How do you handle logging for a two-fer? Do you have a routine for roving between parks in one UTC day? And what is the most useful habit you'd recommend to someone about to run their first activation?
Link to comment
https://www.hamradiobase.com/forums/topic/11286-pota-basics-getting-from-a-park-reference-to-10-logged-qsos-activator-and-hunter-notes/Share on other sites