Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Band plan vs. FCC rules: how do you work out where you can operate, and where you should, from 160 m to 33 cm?

ci_cover.jpg

Looking for a sanity check on how the pieces fit together. There are FCC privileges by license class, the ARRL band plan, international allocations, and the habits people settle into on each band. It's easy to treat them all as one thing, and they aren't.

Here are the specific points that trip people up:

1) Which segments of 160 through 10 meters are CW/data and which are phone, and how do license classes map onto them? 2) How close to a band edge can you safely put a signal, especially in SSB? 3) What's the story with 60 meters and its channels? 4) On 6 m, 2 m, 70 cm and 33 cm, where do simplex calling frequencies sit, and what should stay clear for repeaters and weak-signal work? 5) How do ITU regions change the picture if you travel or work DX?

Corrections and 'check this before you rely on it' warnings are welcome. I know the rules get revised, so please say where something is worth confirming against current Part 97 and the current ARRL band plan.

  • Replies 2
  • Views 24
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

The first thing to separate is law from convention. FCC Part 97 sets which frequencies, modes and power levels each license class may use, and that is enforceable. The ARRL band plan is a voluntary gentlemen's agreement about how to share the space within those limits. You can be fully legal and still be parked on top of a beacon, a net or a weak-signal window.

For HF, the rough US privilege layout (confirm the exact numbers in the current Part 97.301 and 97.305) is as follows. Extra gets everything. General gets nearly everything, but the lower portions of the 80/75, 40, 20 and 15 m phone segments are Extra-only, so General phone starts around 3.800, 7.175, 14.225 and 21.275 MHz. General CW/data starts a little above the bottom of each band, for example 14.025 on 20 m. Technician HF privileges are limited: CW on parts of 80, 40 and 15 m, plus CW/data/SSB on a slice of 10 m (roughly 28.000-28.300 CW/data and 28.300-28.500 phone), with a lower power limit. That means a Technician can use FT8 on 10 m around 28.074 but not on 40 m, because 40 m is CW only for that class.

Some bands have quirks. 160 m runs 1.800-2.000 and is shared with other services. 30 m (10.100-10.150) is CW and data only, no phone, with a lower power limit. 17 m and 12 m are General and up, and they have no Extra-only segments.

The edge issue is the most practical one. The frequency on your dial is not the edge of your signal. An SSB signal occupies roughly 2.4-3 kHz on one side of the displayed frequency. On 20 m and above you use USB, so the energy is above the dial. Dialing 14.350 on USB puts part of your signal outside the band. On 80, 40 and 160 m you use LSB, so the energy is below the dial. A General dialing 3.800 on LSB is transmitting below their phone privileges. Leave a few kHz of margin on the side your sideband extends toward, and remember the dial calibration on your rig may not be perfect either.

On 60 m, the US has historically used discrete channels rather than a continuous band. The usual USB dial frequencies are 5332, 5348, 5358.5, 5373 and 5405 kHz, and the channel centers are 1.5 kHz above the dial setting. It is a secondary allocation, limited to General and Extra, with a modest power limit expressed as ERP and restrictions on mode and bandwidth. The rules have been evolving since the WRC-15 allocation in that region of spectrum, so check the current Part 97 text rather than trusting an older chart.

Convention on the CW/digital side matters too. Many ops stick to FT8/FT4 at the well-known dial frequencies, such as 14.074 on 20 m, 7.074 on 40 m, 3.573 on 80 m and 28.074 on 10 m, with FT4 on separate nearby frequencies. Those come from usage, not regulation. 14.100 is also used by the NCDXF/IARU beacon network, which is a good reason to keep clear of it.

  • Moderators

On VHF/UHF the calling frequencies are the part worth memorizing. The commonly cited US national FM simplex calling frequencies are 52.525 MHz on 6 m, 146.52 on 2 m, 223.50 on 1.25 m and 446.00 on 70 cm. The 10 m FM calling frequency is 29.600. A calling frequency is where you find each other, not where you hold the conversation. Make contact, agree on another simplex frequency and move, so the calling channel stays usable for others.

On 2 m, the band plan sets aside different slices for different purposes. The bottom of the band is weak-signal territory: CW near 144.0-144.1, and SSB with 144.200 as the usual calling frequency. Further up are the repeater input and output pairs and the simplex portions. Those sub-bands are laid out by regional frequency coordinators, so local usage varies. Check your area's repeater directory or coordinator listing before choosing a simplex frequency, so you don't land on a repeater input.

On 6 m, the bottom is generally CW and weak-signal work. SSB users commonly meet around 50.125, and 50.313 is the usual FT8 frequency. FM and repeaters sit higher up, with 52.525 as the simplex calling frequency. In practice 6 m is more of an 'open when it's open' band, so listen first.

70 cm (420-450 MHz in the US) is much more mixed. It carries repeaters, weak-signal work (432.100 is the commonly used calling frequency for SSB/CW), satellite segments, and some experimental or television segments. Repeater pairs typically use a 5 MHz offset. The US allocation is secondary in much of the band, with some geographic restrictions near certain federal installations, so check Part 97 for footnotes before running high power.

33 cm (902-928 MHz) is the odd one. It is shared with ISM and licensed users, so you should expect noise and interference from unlicensed devices. It is also an ITU Region 2 allocation, not worldwide. Equipment is less common than for 2 m or 70 cm, and the band plan has weak-signal and FM sections that are far less crowded. Look up the current ARRL band plan for specifics.

On the international question, the ITU divides the world into three regions and allocations differ. For example, 80 m is 3.5-3.8 MHz in Region 1 and 3.5-4.0 in Region 2, and 40 m is 7.0-7.2 MHz in Regions 1 and 3 but 7.0-7.3 in Region 2. 2 m is 144-146 MHz in Region 1 but 144-148 elsewhere. That is why European stations on 40 m pile up between 7.040 and 7.200, and why US phone operators in the 7.125-7.200 portion can find themselves in the middle of broadcast stations and DX from other regions. It also explains why the CW/data and phone split looks different overseas. If you operate abroad, you follow the host country's rules and license terms. Reciprocal operating arrangements such as CEPT cover many countries but not all, so check before you travel.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.