Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Planning a dual-band mobile install: FTM-500D vs ID-5100A vs TM-D710G, wiring, noise, and cross-band

ci_cover.jpg

I'm putting together a checklist for a 2 meter / 70 cm mobile install in a daily-driver vehicle and want to hear how others approach the whole chain, not just which radio to buy. The three rigs that keep coming up for 50 W-class dual-band mobiles are the Yaesu FTM-500D, the Icom ID-5100A and the Kenwood TM-D710G. All three cover 2 meters and 70 cm with a separable control head or panel and dual-receive operation. They differ mainly in digital mode and feature focus:

The FTM-500D is a C4FM/analog FM radio, so it makes sense if your local activity is on System Fusion repeaters. The ID-5100A is the D-STAR choice and has a touchscreen interface. The TM-D710G is an analog FM radio with built-in APRS and TNC features and is long associated with cross-band repeat and packet use. Check each manual for exactly what the radio supports before you buy. Cross-band repeat in particular is a feature where it pays to read the spec sheet rather than assume.

Questions for the thread:

1. Where do you mount the main body and the control head so they are reachable but not in a knee strike or airbag zone?

2. How do you run power: direct to the battery, a fused distribution block, or a dedicated fuse panel circuit? What fusing do you use at the battery end?

3. If you have noise problems, such as alternator whine or a hash that only shows up with certain accessories running, what was the actual cause and fix?

4. Is cross-band repeat worth setting up for a vehicle with an HT in your hand away from the car? What are the licensing and ID considerations?

5. What mobile etiquette do you think newcomers miss?

  • Replies 2
  • Views 31
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

On power: skip the cigarette lighter socket. A 50 W FM rig draws a lot of current on high power transmit, and lighter circuits are usually thin wire on a shared fuse. Run the supplied power cable, or one of equal or heavier gauge, directly to the battery. Put the fuse in the positive lead as close to the battery terminal as practical, because the fuse's job is to protect the wire run, not just the radio. The inline fuses in the radio's power cable protect the last few feet only. Match fuse value to the radio's manual (the supplied holders are generally rated for the radio's maximum draw) and do not just swap in a bigger fuse because it keeps blowing. A blowing fuse usually means a wiring fault, a bad connection or a wrong rating, not that the fuse is too small.

Use a rubber grommet where the cable passes through the firewall, and avoid routing it across sharp metal edges. Keep the positive and negative leads the same length if you shorten or extend the cable, and use proper crimped, sealed connectors rather than twisted joins. Voltage drop at the radio under transmit is a good test: if the display reads noticeably lower when you key up, check connections and wire gauge.

For noise, first work out what kind it is. Whine that changes pitch with engine RPM is typically alternator or charging-system noise, often coupled through the power lead. Ticking that follows engine speed is ignition noise. Constant hash can come from LED lighting, aftermarket electronics, DC-DC converters, USB chargers or an engine management system. Test by turning accessories off one at a time and listening on a quiet simplex frequency. Then check the basics: solid ground, clean power connections, and keeping power cables away from the coax. Ferrite chokes on the DC lead can help for some noise sources. A hybrid or electric vehicle can be a more difficult environment than a conventional car and may need extra attention to cable routing and antenna placement.

  • Moderators

On cross-band repeat: it lets the mobile receive on one band and retransmit on the other, so a handheld on UHF can talk through a mobile on VHF, or vice versa, extending the HT's reach. Among your three, the TM-D710G is the one widely associated with this feature, but check the manuals for the FTM-500D and ID-5100A to see exactly what each supports. Also check your national and local rules on control operator responsibilities and station identification before using it. You are the one responsible for the retransmitted signal, so you need to identify properly and be within earshot or have a way to shut it down. Pick frequencies carefully so you are not stepping on an active simplex channel or on a repeater pair.

As for mounting, the radio body can often go under a seat or somewhere cool and protected with the cable run to a head unit on the dash or console. Whatever you pick, secure the main unit so it can't become a projectile, and leave airflow around the heatsink. Place the head so you can glance at the display without taking your eyes off the road for long, and keep the mic on a hanger you can find by feel. If the antenna is a quarter-wave on the roof, a good ground plane and low-loss coax are more important than the brand. Check SWR on both 2 meters and 70 cm, since a mount that looks fine on one band can be poor on the other.

Etiquette: driving comes first. Use a hands-free setup where required by local law and keep transmissions short. Listen before you call, because repeater pauses are for others to break in. Identify as mobile when it's useful, pause before a complex intersection or merge, and drop out of a conversation without apology if traffic gets busy. On a net, a simple call and location is enough. Also keep the volume sensible, since a loud speaker reaches the whole cabin and can distract you. Finally, don't tie up a busy repeater with a long conversation when simplex or a quieter pair would work.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.