Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Studying for the Amateur Extra (Element 4): what's worth the time in a 50-question theory exam?

ci_cover.jpg

I'm planning to start on the Extra class exam and want to organize my study time. Element 4 is 50 questions, and as I understand it you need 37 correct to pass. The scope is much broader than General: transistors and op amps, filters, oscillators, modulation theory, receiver and transmitter design, antenna theory, Smith chart problems, and a fair amount of FCC Part 97. The payoff is full privileges on every amateur band and mode, including the Extra-only segments on 80, 40, 20 and 15 meters.

Two things I'd like opinions on. First, is it better to memorize the question pool, or to work out the underlying concepts so the formulas and diagrams make sense? Second, which topic areas tend to cause the most trouble? The Smith chart and the discrete-component circuit questions look the most intimidating to me. Please check any specifics against the current question pool and the FCC rules. I don't want to build my study plan on something that has changed.

  • Replies 2
  • Views 28
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

Do both, but in a particular order. Learn the concept first, then use the pool for repetition. A lot of Element 4 is the same few ideas appearing in different clothes. If you know the relationship, you can handle a question even when the numbers or wording differ from what you practiced.

The math-light concepts are worth knowing cold. Op-amp gain is a good example. An inverting stage has gain of minus Rf divided by Rin, so 100k feedback with 10k input gives a gain of -10 (a 180-degree phase flip). A non-inverting stage is 1 plus Rf over Rin, so the same resistors give 11. Once you see that the inverting input sits at virtual ground, the circuits stop being a collection of facts.

The same goes for filters and tuned circuits. Q is center frequency divided by bandwidth, so a 7.1 MHz circuit with a 100 kHz bandwidth has a Q of 71. Know the response-shape vocabulary too: Butterworth is maximally flat in the passband, Chebyshev trades passband ripple for a steeper cutoff, and elliptical filters have ripple plus notches in the stopband.

For modulation, remember that FM modulation index is peak deviation divided by the modulating frequency. A 3 kHz deviation with a 1 kHz tone gives an index of 3. For Part 97, I'd read the actual rule sections and not rely on the pool's phrasing alone, because the questions often test the exact scope of a rule.

  • Moderators

On the Smith chart, I'd drop the idea that it's mysterious. Start with a few facts and a single worked example.

The center of the chart is a perfect match, which is a normalized impedance of 1 + j0. Take a 50 ohm line with a 100 ohm resistive load. Normalized, that's 2. The reflection coefficient is (100 - 50) / (100 + 50) = 0.333, and SWR = (1 + 0.333) / (1 - 0.333) = 2:1. On the chart, a constant-SWR circle is centered on the middle and passes through that point on the real axis. Moving along a transmission line follows that circle. Moving toward the generator is clockwise, and one full revolution is a half wavelength. That last fact explains why a half-wave line repeats the load impedance.

Most of the pool's chart questions only ask you to read a point, name its position, or identify what the chart is used for. They rarely ask for heavy plotting. Practice reading resistance and reactance from the circles and learn where open, short and matched conditions sit, then check yourself against the pool.

For the antenna questions, keep the reference points straight. A gain figure in dBi is relative to an isotropic radiator, and dBd is relative to a dipole. A dipole is about 2.15 dB above isotropic, so dBi = dBd + 2.15. Many wrong answers come from mixing those two references or forgetting that ERP is calculated from the power at the antenna and the gain relative to a dipole, minus feed line loss.

As for the privileges, the Extra-only segments are the visible payoff, but full access to all bands and modes is the real point. Confirm the exact current band-segment table from the FCC rules or the ARRL band chart when you're ready to operate there.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.