ⓘ Callsign lookups are in real time via the FCC database.
Vanity callsign availability is refreshed daily at 6:00 AM CST.
The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cmvia PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHzDXSpotterInfo
Recent spots—
Select a band above to load spots
Ready — select a band to fetch live spots
Getting from 5 to 20 wpm: what to do about plateaus, head copy and when to put the pencil down
Many learners get to around 5 wpm without trouble and then stall somewhere between 10 and 15. I'd like to collect what works for each stage, so here is a rough framework to argue with.
5 to 10 wpm: The usual advice is to learn characters at full speed, 18 to 20 wpm character speed, and stretch the gaps between them (Farnsworth spacing). If you learn at 5 wpm with normal spacing, you learn to count dits and dahs, and that habit is hard to unlearn. A Koch-style approach adds one or two characters at a time once you copy the current set at about 90 percent. Short sessions of 15 to 30 minutes every day tend to beat a single long weekend session.
10 to 15 wpm: This is where the plateau tends to show up. The sound of a character is gone before you have identified it, and you start copying one character behind. The fix people usually suggest is to stop writing every letter, copy only the first letter of each word, or just listen for whole words. Word lists of common short words and then callsign drills help here, because you start hearing patterns, not letters.
15 to 20 wpm: Head copy starts to happen on its own once you quit chasing it. Time on the air, or recorded QSOs and nets, matters more here than flashcard-style drills. Real operators have uneven spacing, and you need to get used to that.
Things I'd like opinions on:
1. How much of your practice should be callsigns versus plain text versus real on-air copy? Callsigns have no context to lean on, so they are good for raw accuracy, but they can feel like a different skill from ragchew copy.
2. Software decoders: useful for checking your copy, or a crutch? A decoder tends to fall apart with QSB, QRM and sloppy fists, which is exactly when you most want help.
3. Paddle and keyer settings. For sending, do you hold your sending speed a little below your receiving speed? Which iambic mode, A or B, and how tight do you set paddle tension and contact gap?
4. Is a CW net or a weekly contest-style event a good step up from drills, or does it only pile on pressure before you are ready? Check the current schedules and speed requirements for any net or event before joining.
Many learners get to around 5 wpm without trouble and then stall somewhere between 10 and 15. I'd like to collect what works for each stage, so here is a rough framework to argue with.
5 to 10 wpm: The usual advice is to learn characters at full speed, 18 to 20 wpm character speed, and stretch the gaps between them (Farnsworth spacing). If you learn at 5 wpm with normal spacing, you learn to count dits and dahs, and that habit is hard to unlearn. A Koch-style approach adds one or two characters at a time once you copy the current set at about 90 percent. Short sessions of 15 to 30 minutes every day tend to beat a single long weekend session.
10 to 15 wpm: This is where the plateau tends to show up. The sound of a character is gone before you have identified it, and you start copying one character behind. The fix people usually suggest is to stop writing every letter, copy only the first letter of each word, or just listen for whole words. Word lists of common short words and then callsign drills help here, because you start hearing patterns, not letters.
15 to 20 wpm: Head copy starts to happen on its own once you quit chasing it. Time on the air, or recorded QSOs and nets, matters more here than flashcard-style drills. Real operators have uneven spacing, and you need to get used to that.
Things I'd like opinions on:
1. How much of your practice should be callsigns versus plain text versus real on-air copy? Callsigns have no context to lean on, so they are good for raw accuracy, but they can feel like a different skill from ragchew copy.
2. Software decoders: useful for checking your copy, or a crutch? A decoder tends to fall apart with QSB, QRM and sloppy fists, which is exactly when you most want help.
3. Paddle and keyer settings. For sending, do you hold your sending speed a little below your receiving speed? Which iambic mode, A or B, and how tight do you set paddle tension and contact gap?
4. Is a CW net or a weekly contest-style event a good step up from drills, or does it only pile on pressure before you are ready? Check the current schedules and speed requirements for any net or event before joining.
Link to comment
https://www.hamradiobase.com/forums/topic/11365-getting-from-5-to-20-wpm-what-to-do-about-plateaus-head-copy-and-when-to-put-the-pencil-down/Share on other sites