Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

EME station planning from 2 m to 10 GHz: what actually limits your first moonbounce contacts?

ci_cover.jpg

Let's work through the practical side of EME across the bands. The Moon is a poor reflector at a distance of roughly 356,000 to 407,000 km. Round-trip path loss is very roughly 252 dB on 2 m, 261 dB on 70 cm, 271 dB on 23 cm, and close to 290 dB at 10 GHz. The echo returns about 2.5 seconds after you transmit. Every band trades one problem for another, so it is worth asking which constraint hits first.

On 2 m, antenna gain is physically large and sky noise is high. Faraday rotation is a real nuisance, and a ground-based array has to deal with it. On 70 cm, arrays are smaller and Faraday is milder, but you need more elements for the same gain, and feedline loss hurts more. On 23 cm, a dish of a few meters becomes practical, polarization trouble mostly shrinks to geometry, and libration spreading starts to smear weak signals. At 10 GHz, dishes are small in wavelengths but demanding to point. The Moon is only about 0.5 degrees wide, and a 1.8 m dish has a beamwidth of roughly 1 degree.

With digital modes in the picture (JT65 and Q65, both using one-minute transmit/receive periods), the question is no longer whether you can copy CW from a monster station. It is whether your station can decode the weak, spread, fading signals that are actually on the band. So here is the starting question for discussion: for someone building a first EME station, which band and which mode gives the best return on the money, and what should be measured before calling the first CQ?

Some topics worth covering: array size and polarization switching on 2 m and 70 cm, where to put the preamp, dish accuracy and tracking on 23 cm and up, what libration does to your expected decodes, and how to plan skeds so you are not wasting Moon windows.

  • Replies 2
  • Views 34
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Administrators

For 2 m and 70 cm, think in terms of the whole receive chain, not the preamp alone. On 2 m, galactic and sky noise often dominate the system temperature, so feedline loss between the antenna and the preamp matters more than shaving a few hundredths of a dB off the noise figure. Mount a low-noise preamp at the array, keep the relay and cable loss before it small, and use a proper TR sequencer so the relay switches and the preamp is protected before the PA keys. Sequencing mistakes ruin more preamps than weak signals ever do.

Gain is the other lever. A four-Yagi 2 m array of long boom Yagis lands around 20 dBi, which is a common starting point for JT65 work with big stations. Larger arrays help, but stacking distances, phasing lines, and mechanical wind loading grow quickly. On 70 cm the elements are shorter, so more of them fit in the same space, and 70 cm arrays of 8 or more Yagis are common. Check the combiner losses and the connector quality, since in a stacked array a bad connector can cost you more than another Yagi gains you.

Polarization is where 2 m gets interesting. Faraday rotation twists linearly polarized signals as they pass through the ionosphere. On 2 m this causes slow polarization fades, and the effect falls off with frequency, so on 70 cm it is smaller but still present at times. Above that, it matters little. There is also a geometric spatial polarization offset between two stations that depends on where each sees the Moon. A station that can switch between horizontal and vertical, or can rotate the feed or array, can chase the best polarization. If you can only run a fixed polarization, you will miss some windows. Some stations use dual polarization with phase and combine control to cover a whole range, which is more complexity than a first station needs, but it is worth knowing about.

Before the first sked, I would do a Sun-noise measurement and a Moon-noise measurement to verify the pointing and the receive system, and look for your own echo when the system is ready. If you cannot hear your own echo on a decent day, there is no point calling a partner.

  • Administrators

On 23 cm and above, the dish becomes the natural choice. As a sanity check, a 3 m dish at 1296 MHz with a typical 55% efficiency gives about 30 dBi and a beamwidth around 5 degrees. A 1.8 m dish at 10 GHz is around 43 dBi, but with a beamwidth near 1 degree, so mount rigidity, backlash, and the tracking error budget are now serious engineering constraints. Position feedback and a tracking program that handles pointing corrections are not optional. Sun tracking is a convenient way to calibrate pointing offsets since the Sun is easy to find.

Polarization also changes. On 23 cm many stations still use linear polarization with a rotatable feed to adjust for the spatial offset. Circular is common on 10 GHz. The reflection from the Moon reverses the sense of circular polarization, so stations on the microwave bands commonly transmit one sense and receive the opposite. Check the conventions your partner expects before assuming a mismatch is a hardware fault.

Libration fading is the other big shift. The Moon's apparent motion relative to Earth spreads the reflected signal in frequency, and the spread grows with frequency. On 2 m it is slight, while on 23 cm it is wide enough to hurt narrow decoders, and on 10 GHz it is much wider still. This is why wider submodes make sense on higher bands. For Q65, choose the submode letter to match the expected spread, and for JT65 the same logic applies, with the B and C variants being the wider ones. Exact conventions vary, so check what the local EME group and the current software documentation recommend instead of assuming. Q65 also generally offers a modest sensitivity edge over JT65 in similar conditions, which is useful when your signal is near the edge.

For skeds, plan around the Moon window. You need the Moon above the horizon at both ends with enough elevation for a clean path, and the path loss is about 2 dB better near perigee than at apogee. Agree on the band, mode, frequency, which minute starts first, and who is sending in which period. Keep clocks synced to within about a second, and use the standard message sequence of calls and grid, then reports, then RRR, then 73. Short signals like OOO and RO are common in this style of QSO. Whenever possible, schedule against stations that match your capability, since the best first contacts are the ones where both sides are within the decode threshold, not a station that is just barely audible to a big array.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.