Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Choosing a first (or next) handheld: FT-65R vs Baofeng vs ID-52A vs TH-D75, and where the IC-705 fits

ci_cover.jpg

This question comes up constantly: which handheld should you buy, and how much radio do you need? I'd like this thread to collect practical thinking rather than a spec-sheet fight. Here is the landscape as I understand it, and please correct me where I'm off.

The budget analog tier. The Yaesu FT-65R is a 144/430 MHz dual band FM handheld at the 5 W class. It has no GPS, Bluetooth, or digital modes. People tend to pick it over the cheapest Baofeng models for its more conventional receiver behavior and its fit and finish. The Baofeng UV-5R family is cheaper and very widely used, and it works for basic repeater and simplex contact. The usual complaints are a front end that overloads easily near strong transmitters, spurious emissions on some models, and stock antennas that perform poorly. If you live near a high-power paging or broadcast site, receiver quality matters more than the feature list.

The digital-voice tier. The Icom ID-52A is a dual band D-STAR handheld that also does analog FM. The Kenwood TH-D75 adds 220 MHz in the North American version, and also does D-STAR, APRS, GPS, and Bluetooth. Both cost far more than an FT-65R. What you are buying is D-STAR access and the integrated data features, not extra range. If nobody near you runs D-STAR repeaters or reflectors, that money buys features you won't use. Check your local repeater directory before deciding.

DMR. This is a separate path. DMR handhelds are often cheaper than the D-STAR ones, but the setup is more involved: a radio ID, color codes, time slots, talkgroups, and a codeplug. Programming goes through the manufacturer's software or a third-party tool, not just CHIRP. It rewards people who like tinkering, and it can frustrate people who just want to push the button.

The IC-705. It gets listed with handhelds, but it is really a compact portable transceiver covering HF, 50, 144, and 430 MHz with D-STAR support. It is for portable HF/SOTA/POTA-style operation, not a replacement for something on your belt. Compare it to an HF rig, not to an HT.

Antennas and batteries. Replacing the stock antenna is probably the cheapest performance upgrade for any of these. A longer 144/430 whip, or a roll-up J-pole for stationary use, often beats the stock rubber duck. Check the connector first: many handhelds use an SMA-female jack on the radio, but some differ, and adapters add loss. For batteries, buy a spare pack from the manufacturer or a reputable source, and keep one charged. Handhelds drain quickly on high power with long transmissions. Where available, an AA-cell case is a useful fallback.

Programming and offsets. CHIRP supports many analog models, including the FT-65R and many Baofeng radios. Check its supported-radio list for the specific model you buy, since digital radios have limited or no support. Always download the radio's current image and save a backup before you write anything. On repeaters, the offset is not universal. Many US 2 m repeaters use ±600 kHz and many 70 cm repeaters use ±5 MHz, but the sign and the CTCSS tone depend on the repeater and the band plan. In other regions the 70 cm offset is different, so use a local repeater directory rather than assuming.

Emergency use. A handheld alone has limited range. Program your local repeaters, the simplex calling frequencies in your region, and any local net frequencies before you need them. Practice with the radio's menu so you aren't learning it under stress. Also remember that licensing matters: amateur bands need an amateur license, and some inexpensive radios can transmit on frequencies where you are not authorized.

So, what's your priority: lowest cost, best receiver, digital modes, or portability? What does your local repeater scene use?

  • Replies 2
  • Views 26
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

I'd start with what the local repeaters actually run. If your area is mostly analog FM, a good analog dual bander covers nearly everything you'll hear. Extra digital features sit idle if nobody around you uses D-STAR or DMR. Look up the repeater directory for your area, see which modes are common, and buy for that.

On the Baofeng question, the radio is fine for learning, but I'd put the saved money into a better antenna and a spare battery. Those two changes often improve the experience more than switching to a pricier radio. Just be aware of the receiver overload issue near strong transmitters, and consider a different model if you notice it.

On CHIRP, I'd stress the habit of reading from the radio first and saving the image. It sounds boring, but it means that if a bad write messes something up, you can restore it.

  • Moderators

One detail worth adding on D-STAR: it isn't just a different modulation. Calling through a repeater uses fields like MYCALL, URCALL, RPT1, and RPT2, and gateway use needs you to be registered. It is more involved than analog FM, so read the repeater trustee's instructions before you assume the radio will just work. The ID-52A and TH-D75 make it easier, but they don't remove the concepts.

For emergency prep, I'd keep the setup simple. Put a few well-labeled memory channels at the front: local repeater, backup repeater, and simplex. Keep a printed copy of the frequency list with tones and offsets, because it's easy to lose a radio's memory if something goes wrong. Test it periodically on a net so the radio isn't a mystery when you need it.

And the IC-705 comment above is right. It's a lovely radio, but it is a different category. If you want something for a pack or a go-bag, a dedicated HT plus a better antenna is a much simpler comparison.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.