Getting from 5 to 20 WPM: what actually moves the needle, and what to do when you stall
- Replies 2
- Views 26
- Created
- Last Reply
Top Posters In This Topic
-
Mod_Mike 1 post
-
Mod_Chrissy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
Most CW learners hit the same milestones in the same order. Characters are solid at 5 WPM, then 10-13 WPM feels like a wall, then somewhere past 15 the brain starts hearing words instead of letters. This thread is for comparing methods at each stage. Below is a rough map, and the replies can pick it apart.
Character speed versus overall speed. Whether you use Koch or Farnsworth, the usual advice is to keep individual characters at 18-20 WPM and stretch the gaps between them. If characters are sent at 5 WPM, you end up counting dits and dahs, and that habit is hard to unlearn. At full character speed each letter becomes a single sound, like a short word. Then you shrink the spacing as copy gets comfortable.
The 10-13 WPM plateau. This is often where you are still translating: hear a character, name the letter, write it down, and miss the next one while doing so. Raising speed alone may not fix it. What tends to help is copying slightly faster than is comfortable and accepting gaps, plus sessions where you stop writing and just listen for whole words. Common words (the, and, you, rig, ant, name, QTH) are good first targets because they get recognized as units.
Head copy. Start small. Take a block of easy text and follow it by ear with no pencil, then try a QSO exchange. Callsigns are good drill material because they are short, random, and what you will actually need on the air. Tools like RufzXP exist for exactly this kind of callsign work, and Morse Runner simulates contest pileups at adjustable speed and noise.
Schedule. Fifteen to thirty focused minutes a day generally beats two hours on a weekend. A simple split is a few minutes of new or weak characters, ten minutes of word and callsign drills, then a few minutes of real or recorded on-air copy. When you plateau, rotate the mix instead of grinding the same drill.
On-air practice. Slow-speed CW nets and practice sessions exist, and many clubs and CW groups run them, but check current schedules and frequencies with the organizers. Short contest-style events can be good for callsign and exchange copy because the format is repetitive and predictable. You do not need to enter seriously. Listening to the exchange pattern is practice too.
Keys and keyers. If you send with paddles, a keyer speed a few WPM below your copy speed helps keep sending clean. Weight and dah-to-dit ratio are usually left near default, around 3:1. Paddle contact spacing and tension are personal. Too tight causes missed elements, too loose causes doubled ones.
Ear versus software. Decoders are useful for checking what you thought you heard, but they struggle with fading, noise, and the irregular timing of hand-sent code. If a decoder is always on, your ear may never be forced to do the work.
Questions for the thread: what broke you out of a plateau? Do you drill callsigns separately or only in context? And where do you draw the line on decoder use?
Link to comment
https://www.hamradiobase.com/forums/topic/11399-getting-from-5-to-20-wpm-what-actually-moves-the-needle-and-what-to-do-when-you-stall/Share on other sites