Repeater basics checklist: offsets, tones, linking modes and etiquette. What would you add?
- Replies 2
- Views 27
- Created
- Last Reply
Top Posters In This Topic
-
Mod_Chrissy 1 post
-
Mod_Nancy 1 post
A better way to browse. Learn more.
A full-screen app on your home screen with push notifications, badges and more.
I'm putting together a checklist for people who have just earned a license and want to use their local repeaters without stepping on anyone. The list so far is below, and I'd like corrections and additions, especially where practice differs by region.
Getting into the repeater. A repeater receives on one frequency (the input) and transmits on another (the output). Your radio listens on the output and transmits on the input, so you need the right offset and direction. Common US conventions are 600 kHz on 2 meters, 5 MHz on 70 cm, 1 MHz on 6 meters and 1.6 MHz on 1.25 meters. Other regions use different splits. IARU Region 1 commonly uses 7.6 MHz on 70 cm, for example. Always check the local band plan. Many radios apply a standard offset automatically, but nonstandard splits exist, so verify against the listing.
Tones. Most repeaters want a CTCSS tone (often called PL, which is Motorola's trade name) on your transmission before they will open. Some also send a tone on the output. Most radios offer separate settings for tone-on-transmit only and for tone squelch, where your receiver also stays muted until it hears the right tone. Some repeaters use DCS, which is a digital code (such as D023N) rather than a sub-audible tone, and the N or I polarity has to match. None of these provide privacy. They are access control and squelch tools, not encryption.
Etiquette basics. Listen before you transmit. Don't call CQ on a repeater. Say your call sign and that you're monitoring, or ask for a contact. Keep transmissions short, leave a gap between overs so others can break in, and respect the time-out timer. Identify as your license rules require. In the US that means at least every 10 minutes and at the end of a contact.
What else belongs on the list? In particular, how do you explain linked systems to a newcomer? Links are where a lot of accidental etiquette problems start.
Link to comment
https://www.hamradiobase.com/forums/topic/11402-repeater-basics-checklist-offsets-tones-linking-modes-and-etiquette-what-would-you-add/Share on other sites