Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

EME across 2 m, 70 cm, 23 cm and microwaves: what each band demands in antennas, power, polarization and scheduling

ci_cover.jpg

Moonbounce looks like one activity, but each band changes the problem. Rough round-trip path loss is about 250 dB on 2 m. It climbs to roughly 260 dB on 70 cm, 270 dB on 23 cm and close to 290 dB at 10 GHz. The Moon's distance also matters. Between perigee and apogee the round-trip loss changes by about 2 dB, and that is enough to decide whether a marginal station is workable on a given day.

The digital modes have moved the entry point down. JT65 (A on 2 m, B or C on the higher bands) and Q65 in WSJT-X decode signals that are below audibility. Q65 has several tone-spacing submodes, so you can match it to the Doppler spread of your band. That spread grows with frequency, so the higher bands need the wider submodes. The common 60-second Q65 submodes are used for EME. Both modes need the PC clock within about a second of true time, so use GPS or a reliable NTP source. Both also rely on the standard short exchange of callsigns, reports, RRR and 73, so most of the work is getting a decodable signal across.

Here is a practical way to think about the bands. On 2 m, the usual starting point is an array of several long-boom Yagis (four is common), a legal-limit amplifier, and a very low noise-figure preamp at the mast. Feedline loss on both receive and transmit counts almost dB for dB. On 70 cm, a similar Yagi array can work, but the sky is quieter and the hardware is physically smaller. On 23 cm, most stations use dishes of a few metres with a good feed and a few hundred watts at most. At 10 GHz, dish accuracy, feed alignment and tracking precision become more important than raw power.

Which band should a new station choose, and what is the minimum worth building? I'd also like to hear how people handle polarization, because it differs more by band than most beginners expect.

  • Replies 2
  • Views 32
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Polarization is where the bands really split. On 2 m, Faraday rotation in the ionosphere can turn the echo's polarization by a large amount, and it changes over minutes to hours. That is why you see slow, deep fades that have nothing to do with the Moon itself. Even with perfectly matched antennas, the two stations can be badly misaligned in polarization. This is sometimes called spatial offset, and it comes from the geometry between the two locations and the Moon. A cross-polarized array with switchable or phased polarization lets you hunt for the best angle, and many 2 m stations use it. On 70 cm the Faraday effect is much weaker, because it falls off roughly with the square of frequency. By 23 cm it is usually negligible, so many dish stations use fixed linear or circular feeds instead.

With circular polarization, remember that reflection from the Moon reverses the sense. A station that transmits one sense receives the opposite sense, so check the convention your contacts use before you build the feed.

Libration fading is a separate effect. The Moon rocks slightly, which spreads the echo in frequency and produces fast flutter. It is mild on 2 m, clearly present on 23 cm, and severe at 10 GHz. That is why higher-band Q65 submodes use wider tone spacing, and why a signal that looks steady on 2 m can look smeared on the waterfall at 10 GHz. For a first station, this argues for starting on a lower band while you learn to read what the decoder shows you.

  • Moderators

On planning, don't treat the Moon as just 'up or down'. Sky noise matters a lot on 2 m, and it depends on where the Moon is against the galactic background. Distance also matters, as noted above. Planning tools such as the EME calculator by VK3UM can help estimate whether a given pair of stations has enough margin on a given day. Check the current version and how it treats the numbers you enter, because the result is only as good as your inputs. Community chat and logging pages such as ON4KST and HB9Q are where skeds are usually arranged. Their formats change, so look at how current users do it before you post.

Before your first sked, test the station on your own. WSJT-X has an Echo mode that lets you hear your own signal return from the Moon with the expected round-trip delay of about 2.5 seconds. If you can't see your own echo, you won't help a distant station that has to dig for you. On 23 cm and above, measure Moon noise and Sun noise as a pointing and system check. This is a standard way to tell whether your feed, preamp and dish are doing what they should.

Tracking precision scales with beamwidth. A rough rule is about 70 λ/D degrees for a dish. For a 3 m dish that is roughly 5 degrees on 23 cm but only around 0.7 degrees at 10 GHz, which is not much larger than the Moon's own half-degree disc. At 10 GHz you need good encoder resolution, a stiff mount and reliable pointing models. On 2 m a loose 5 degree error may be survivable, but it still costs signal. Before the first sked, confirm which period each station transmits in, since the cycle assignment is agreed between the two stations, and make sure Doppler correction is set up consistently on both sides.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.