Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Small lot, HOA limits, 80m–10m: what's the best compromise between an EFHW, a doublet and a vertical?

ci_cover.jpg

Here is a common situation that tends to start long arguments. You have a lot roughly 50 ft wide, and the covenants ban visible towers and anything that looks like a "commercial antenna." You want to work HF from 40m up through 10m, and 80m would be nice but isn't essential. You can hang wire from the house and one or two trees at 25 to 35 ft, and you can put up something slim and dull-colored that is only up during operating sessions.

The candidates usually come down to these:

1) A 40m-fundamental end-fed half-wave (EFHW) with a 49:1 or 64:1 transformer, run as a sloper or inverted L, working 40/20/15/10 on its harmonics.

2) A center-fed doublet of about 100 to 130 ft fed with ladder line into a tuner, with the wire sagging or bent where it has to.

3) A telescoping vertical (a flagpole-style or fiberglass mast with a wire) with an elevated or buried radial system.

4) A small magnetic loop on a tripod, used only when operating.

I'd like to compare these on the things that actually matter on a small lot: radiation pattern and takeoff angle at your real height, feedline and matching losses, how much common-mode current you will have to fight, and how quickly you can put it up and take it down. SWR alone doesn't answer any of that. A dummy load has a perfect 1:1 SWR and radiates nothing.

Where do you land on a lot like this, and what would you check before cutting wire?

  • Replies 2
  • Views 25
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

I'd start with the doublet, then work backward from the compromises. A balanced, center-fed wire on ladder line is the most forgiving multiband option when you can't make the geometry ideal. Open-wire line has very low loss even at a high SWR. The mismatch loss is mostly paid in the tuner, not in the feedline, and a decent tuner handles that. The wire doesn't have to be straight, symmetrical, or any particular length. Avoid lengths where the feedpoint impedance becomes extreme on your favorite band, and a quick model will show you which lengths to dodge. A G5RV is really just a doublet with a short ladder-line section and a coax run. It can work, but it doesn't have any magic. On most bands you still need the tuner, and the coax between the ladder-line section and the radio carries a high SWR on those bands, so you pay more loss than with ladder line all the way to the shack.

Height matters more than most people expect. A horizontal 40m dipole at 30 ft is only about 0.2 wavelength up, so it has a high takeoff angle. That is fine for regional contacts and NVIS-type work, but it isn't a DX antenna on 40. On 20m, the same 30 ft is nearly 0.45 wavelength, which is much better for lower-angle radiation. The same wire improves as you go up in frequency. Fold the ends down into an inverted V if you have to. Keep the included angle above roughly 90 degrees, and keep the ends out of reach of people and pets, because the voltage at the tips can be substantial.

Common-mode current is the quiet problem with every option here, whether or not it shows up as SWR. A 1:1 current balun or common-mode choke at the feedpoint helps, and so does a second choke where the feedline enters the house. Ferrite choking impedance of a few thousand ohms or more across the band you care about is a reasonable target. If the antenna sits near the house wiring, put the chokes in before you start chasing noise or RFI.

  • Moderators

I'd argue for keeping the EFHW on the list, but with realistic expectations. The EFHW is attractive because it is one wire and a small box, and it comes up quickly. It resonates on 40, 20, 15 and 10 because those are harmonics of the 40m fundamental. The feedpoint impedance is high, in the thousands of ohms, hence the 49:1 or 64:1 transformer. Two things make or break it. First, there is no true balanced feed, so the coax shield and whatever counterpoise you give it become part of the antenna. Without a good choke on the coax, you can see a nice SWR and still be pushing a lot of current onto the shield. Second, the transformer's core and windings determine how much power you lose as heat. That is a minor concern at 5 to 10 W of FT8 or CW, but a more serious one at 100 W of continuous digital mode on a cheap core in a hot box.

The OCFD (Windom-style) has a similar appeal, being fed about a third of the way along the wire, usually through a 4:1 balun, and covering 80/40/20/10 on harmonics. The pattern can break up on higher bands, and 15 and 12m are often a poor match without a tuner. The 1:1 current choke at the feedpoint is not optional there either.

On the vertical, the radial system is the antenna as much as the vertical element is. A ground-mounted vertical with only a handful of radials wastes a lot of power in the ground. Many short radials, a dozen or more, laid on or just below the surface, give a noticeably better result. Alternatively, a few resonant elevated radials, four or so at a quarter wave each, work well. On a small lot the radials may be hard to place, but they don't need to be straight. Loaded verticals, such as short whips with a coil, are narrow-band and lossy at 80 and 40m, and efficiency suffers badly when the radiator is a small fraction of a wavelength.

A magnetic loop is the best fit if you truly can't hang wire. It is quiet on receive, compact, and has a deep pattern null you can use. The tradeoffs are a very narrow bandwidth, so you retune for each change of a few tens of kHz on the lower bands, and efficiency that depends heavily on conductor size, joint quality and capacitor losses. On 40m and below, small loops give up a lot of efficiency compared with a full-size wire. Keep people away from the loop and capacitor while transmitting, because of the high voltages and the RF exposure close to the antenna.

Whatever you choose, check the covenants as well as local rules. In the US, PRB-1 deals with state and local regulation, but it doesn't necessarily override private deed restrictions or HOA covenants, so the practical answer can depend on your own paperwork.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.