Skip to content
View in the app

A better way to browse. Learn more.

Ham Radio Base

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Ham Radio Base — Education, Resources, Projects and Community
☀ Solar
SFI 99
SN 26
A 6
K 0 Quiet
X-Ray B2.3
Wind 384.8 km/s
Aurora 1
Updated 13:30 UTC HamQSL · N0NBH
Day 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor
Night 80/40m Good 30/20m Good 17/15m Fair 12/10m Poor

Callsign Lookup
_
Vanity Call Signs Available
Enter filters above and click Search.
ⓘ Callsign lookups are in real time via the FCC database. Vanity callsign availability is refreshed daily at 6:00 AM CST. The vanity search may be unavailable for a few minutes during this update.
Live DX spots
Live DX Spots — 70cm via PSKReporter · scroll or pinch to zoom
Band
Mode
Time
Loading map data…
MHz DX Spotter Info
Recent spots —
Select a band above to load spots
Ready — select a band to fetch live spots

Where exactly do I operate? Sorting out band plans, band edges, and calling frequencies from 160 m to 33 cm

ci_cover.jpg

I'm trying to build a mental map of the bands and I keep mixing up three things: what the FCC says I can legally do, what the ARRL band plan suggests, and what people actually do on the air. Some specific points are tripping me up.

First, on HF the phone, CW and digital segments differ by license class, and the privilege charts are hard to memorize. Is there a sensible way to think about it? Second, how close to a band edge is safe when I'm on SSB? If the General phone segment on 75 m starts at 3.800 MHz, can I just park my dial there? Third, on VHF/UHF I know 146.52 MHz is the FM calling frequency, but what about 6 m, 70 cm, and 33 cm? Finally, how do 60 m and the international allocations fit in? I've heard 60 m is channelized and that Region 1 operators have less spectrum on some bands.

Corrections welcome. I'd rather learn it properly than get it half right.

  • Replies 2
  • Views 27
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Moderators

Start by separating the two layers. FCC Part 97 is the law: frequency segments, emission types, power limits, and which license class gets what. The ARRL band plan is voluntary. It says things like "digital modes cluster here, CW and weak-signal work lives there." You can break the band plan and still be legal, but you'll step on people and they'll tell you. You can also follow the band plan perfectly and be illegal if you're outside your class's segment.

For HF privileges, remember the pattern rather than every number. Extra gets everything. General gets most of each band but leaves out the bottom of the phone segments on 80, 40, 20, and 15 m, where Extra phone starts lower. Technicians get HF only in small segments: CW on parts of 80, 40, and 15 m, plus 10 m, where they have CW/data and SSB phone at 28.300–28.500 MHz. They also have a lower HF power limit (200 W PEP). Technicians don't get 160 m. Verify exact numbers against the current ARRL privilege chart or Part 97.301–97.305. Don't trust a number from a forum post, including this one.

The 30 m band is the odd one: 10.100–10.150 MHz, CW and data only, no phone, 200 W PEP limit. People often assume it works like the others, and it doesn't.

On band edges, don't forget that your signal has width. SSB takes roughly 2.7 to 3 kHz. Convention is LSB below 10 MHz and USB above it. If you're on LSB and your dial reads 3.800 MHz, the energy is spread below the dial frequency, so part of your signal falls outside the General segment. Move up so the whole signal clears the edge, and give yourself some margin for dial calibration error. The same logic applies on USB at the top of a segment. On 20 m, Extra phone starts at 14.150 MHz, and the USB signal extends upward from the dial, so you're fine there. At the upper edge of a band, USB would reach past it. Check your rig's accuracy against a known signal.

For digital, the common FT8 dial frequencies are conventions, not rules. The usual ones are 1.840, 3.573, 7.074, 10.136, 14.074, 18.100, 21.074, 24.915, 28.074, and 50.313 MHz. They fall inside the data segments, but it's the shared habit that makes the calling frequencies work.

  • Moderators

For VHF/UHF the useful distinction is FM simplex versus weak-signal. The national FM simplex calling frequencies are 52.525 MHz on 6 m, 146.52 MHz on 2 m, 223.50 MHz on 1.25 m, and 446.000 MHz on 70 cm. You call there briefly, then move to another simplex frequency to talk. Don't hold a long conversation on the calling channel.

Weak-signal work (CW and SSB, and digital modes like FT8) sits at the low end of each band. On 6 m, 50.125 MHz is the SSB calling frequency, with the DX window around 50.100–50.130, and 50.313 is the usual FT8 frequency. On 2 m, 144.200 is the SSB calling frequency, and the very bottom of the band is for CW. On 70 cm, 432.100 is the commonly used weak-signal calling frequency. Repeaters and FM live well away from these. That's the main point of the plan: if you tune a repeater-style FM signal into 144.200, you've wandered into someone else's territory.

For 33 cm (902–928 MHz), the thing to remember is that it's a Region 2 allocation, and it's shared with non-amateur users, including unlicensed devices. Activity is sparse in many areas. The ARRL plan lists 902.100 MHz as a weak-signal calling frequency, but check the current plan for FM and repeater channels rather than relying on memory. Also note that parts of 70 cm have restrictions near the Canadian border (the Line A restriction), so check if you're in that area.

On 60 m, the US doesn't give you a continuous band. It's five channels shared with other services, and you operate with a General, Advanced, or Extra license. The channel center frequencies are 5332, 5348, 5358.5, 5373, and 5405 kHz. In USB, the dial frequencies are 5330.5, 5346.5, 5357.0, 5371.5, and 5403.5 kHz. Voice must be USB, bandwidth is limited to about 2.8 kHz, and power is limited to 100 W ERP relative to a half-wave dipole. The rules also allow CW and some digital modes on these channels. Because it's a shared band, you're a secondary user and need to be careful about interference to the primary users.

For international allocations, the ITU splits the world into Regions 1, 2, and 3, and the US is in Region 2. A few examples: 80 m is 3.5–3.8 MHz in Region 1 but 3.5–4.0 MHz in Region 2. 40 m is 7.0–7.2 MHz in Regions 1 and 3 but 7.0–7.3 MHz in Region 2. That's why US stations operating above 7.200 MHz can run into shortwave broadcasters in other regions. Also, 2 m is 144–148 MHz in Region 2 but 144–146 MHz in Regions 1 and 3. If you travel, you need to follow the local country's rules, not just the US chart. Check the licensing arrangement (reciprocal or CEPT, for example) for where you're going.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Affiliate Disclosure: As an Amazon Associate, Ham Radio Base earns from qualifying purchases. Some links throughout this website may be affiliate links. If you purchase a product through one of these links, we may earn a commission at no additional cost to you. Your support helps us continue creating free articles, tutorials, reviews, and resources for the amateur radio community. N0TLB © Ham Radio Base - Powered by the Ham CQ DX Community. All rights reserved.

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.